diff options
Diffstat (limited to 'keyboards/foxlab')
21 files changed, 40 insertions, 288 deletions
diff --git a/keyboards/foxlab/key65/hotswap/config.h b/keyboards/foxlab/key65/hotswap/config.h index 772fe2a237..8a1462ac3b 100644 --- a/keyboards/foxlab/key65/hotswap/config.h +++ b/keyboards/foxlab/key65/hotswap/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -38,11 +33,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define LED_SCROLL_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 - #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 #define RGB_DI_PIN E2 @@ -65,43 +56,11 @@ #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/foxlab/key65/hotswap/info.json b/keyboards/foxlab/key65/hotswap/info.json index e6615681ef..59e75d4538 100644 --- a/keyboards/foxlab/key65/hotswap/info.json +++ b/keyboards/foxlab/key65/hotswap/info.json @@ -8,6 +8,12 @@ "pid": "0x0003", "device_version": "0.0.1" }, + "indicators": { + "scroll_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/foxlab/key65/hotswap/rules.mk b/keyboards/foxlab/key65/hotswap/rules.mk index c483c98ee3..8a6e2c7b71 100644 --- a/keyboards/foxlab/key65/hotswap/rules.mk +++ b/keyboards/foxlab/key65/hotswap/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/key65/universal/config.h b/keyboards/foxlab/key65/universal/config.h index fb2d90b5ac..8a465f7567 100644 --- a/keyboards/foxlab/key65/universal/config.h +++ b/keyboards/foxlab/key65/universal/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -38,11 +33,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define LED_SCROLL_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 - #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 #define RGB_DI_PIN E2 @@ -65,43 +56,11 @@ #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/foxlab/key65/universal/info.json b/keyboards/foxlab/key65/universal/info.json index 3aa36fcc62..1f19916693 100644 --- a/keyboards/foxlab/key65/universal/info.json +++ b/keyboards/foxlab/key65/universal/info.json @@ -8,6 +8,13 @@ "pid": "0x0004", "device_version": "0.0.1" }, + "indicators": { + "scroll_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["65_ansi_blocker_split_bs"], "layouts": { "LAYOUT_65_ansi_blocker_split_bs": { "layout": [ diff --git a/keyboards/foxlab/key65/universal/rules.mk b/keyboards/foxlab/key65/universal/rules.mk index 5d93138381..8a6e2c7b71 100644 --- a/keyboards/foxlab/key65/universal/rules.mk +++ b/keyboards/foxlab/key65/universal/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker_split_bs # Support community layouts diff --git a/keyboards/foxlab/leaf60/hotswap/config.h b/keyboards/foxlab/leaf60/hotswap/config.h index eebcbec8ab..72a597c85d 100644 --- a/keyboards/foxlab/leaf60/hotswap/config.h +++ b/keyboards/foxlab/leaf60/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,9 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define LED_CAPS_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 4 @@ -66,45 +58,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +78,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/foxlab/leaf60/hotswap/info.json b/keyboards/foxlab/leaf60/hotswap/info.json index b577d864dd..0425a64bfb 100644 --- a/keyboards/foxlab/leaf60/hotswap/info.json +++ b/keyboards/foxlab/leaf60/hotswap/info.json @@ -8,6 +8,12 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_60_tsangan_hhkb": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}] diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index 3ca912f6ec..0922d3d511 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/leaf60/universal/config.h b/keyboards/foxlab/leaf60/universal/config.h index 57cf24c548..67d4a4dae6 100644 --- a/keyboards/foxlab/leaf60/universal/config.h +++ b/keyboards/foxlab/leaf60/universal/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,12 +34,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define LED_CAPS_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 #define RGB_DI_PIN E2 #ifdef RGB_DI_PIN @@ -65,45 +56,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -119,7 +76,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/foxlab/leaf60/universal/info.json b/keyboards/foxlab/leaf60/universal/info.json index 2675639455..d1abab386d 100644 --- a/keyboards/foxlab/leaf60/universal/info.json +++ b/keyboards/foxlab/leaf60/universal/info.json @@ -8,6 +8,13 @@ "pid": "0x0002", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["60_ansi", "60_hhkb"], "layouts": { "LAYOUT_all": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index b2f9ffe48c..0922d3d511 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/foxlab/time80/config.h b/keyboards/foxlab/time80/config.h index 677c53ecf3..f6788c28bc 100644 --- a/keyboards/foxlab/time80/config.h +++ b/keyboards/foxlab/time80/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 15 // 0 1 2 3 4 5 6 7 8 9 A B C D E #define MATRIX_ROW_PINS { B1, B2, B3, B5, B6, B7, B0 } @@ -31,8 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN D4 -#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING #define RGBLED_NUM 16 //#define RGBLIGHT_HUE_STEP 8 @@ -40,50 +33,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define RGBLIGHT_VAL_STEP 8 //#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ //#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -99,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/foxlab/time80/info.json b/keyboards/foxlab/time80/info.json index 5173c152b2..7b8d4603c6 100644 --- a/keyboards/foxlab/time80/info.json +++ b/keyboards/foxlab/time80/info.json @@ -8,6 +8,8 @@ "pid": "0x0005", "device_version": "0.0.1" }, + "processor": "atmega32a", + "bootloader": "bootloadhid", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/foxlab/time80/rules.mk b/keyboards/foxlab/time80/rules.mk index 1bbfa8fa0e..a3ca698e0b 100644 --- a/keyboards/foxlab/time80/rules.mk +++ b/keyboards/foxlab/time80/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32a - -# Bootloader selection -BOOTLOADER = bootloadhid - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/time_re/hotswap/config.h b/keyboards/foxlab/time_re/hotswap/config.h index c7d220255f..357f5accaf 100644 --- a/keyboards/foxlab/time_re/hotswap/config.h +++ b/keyboards/foxlab/time_re/hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 /* * Keyboard Matrix Assignments @@ -39,10 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -#define BACKLIGHT_LEVELS 3 - -#define LED_CAPS_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 #define RGB_DI_PIN E2 diff --git a/keyboards/foxlab/time_re/hotswap/info.json b/keyboards/foxlab/time_re/hotswap/info.json index 3479c1e33e..35eeafd2e9 100644 --- a/keyboards/foxlab/time_re/hotswap/info.json +++ b/keyboards/foxlab/time_re/hotswap/info.json @@ -8,6 +8,12 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/foxlab/time_re/hotswap/rules.mk b/keyboards/foxlab/time_re/hotswap/rules.mk index b03288f7ae..d96164b489 100644 --- a/keyboards/foxlab/time_re/hotswap/rules.mk +++ b/keyboards/foxlab/time_re/hotswap/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/time_re/universal/config.h b/keyboards/foxlab/time_re/universal/config.h index c7d220255f..357f5accaf 100644 --- a/keyboards/foxlab/time_re/universal/config.h +++ b/keyboards/foxlab/time_re/universal/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 /* * Keyboard Matrix Assignments @@ -39,10 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -#define BACKLIGHT_LEVELS 3 - -#define LED_CAPS_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 #define RGB_DI_PIN E2 diff --git a/keyboards/foxlab/time_re/universal/info.json b/keyboards/foxlab/time_re/universal/info.json index 3479c1e33e..35eeafd2e9 100644 --- a/keyboards/foxlab/time_re/universal/info.json +++ b/keyboards/foxlab/time_re/universal/info.json @@ -8,6 +8,12 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/foxlab/time_re/universal/rules.mk b/keyboards/foxlab/time_re/universal/rules.mk index 3c2afd0583..37ab2ebad1 100644 --- a/keyboards/foxlab/time_re/universal/rules.mk +++ b/keyboards/foxlab/time_re/universal/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |