diff options
Diffstat (limited to 'keyboards/ferris/0_2')
| -rw-r--r-- | keyboards/ferris/0_2/bling/bling.c | 2 | ||||
| -rw-r--r-- | keyboards/ferris/0_2/bling/config.h | 52 | ||||
| -rw-r--r-- | keyboards/ferris/0_2/bling/info.json | 45 | ||||
| -rw-r--r-- | keyboards/ferris/0_2/matrix.c | 24 |
4 files changed, 55 insertions, 68 deletions
diff --git a/keyboards/ferris/0_2/bling/bling.c b/keyboards/ferris/0_2/bling/bling.c index 07f58149cc..69fbe411eb 100644 --- a/keyboards/ferris/0_2/bling/bling.c +++ b/keyboards/ferris/0_2/bling/bling.c @@ -27,7 +27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | | 4 | | || | | 4 | | | 6 | | | 2 || 2 | | | 5 | */ -const is31fl3731_led_t g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/ferris/0_2/bling/config.h b/keyboards/ferris/0_2/bling/config.h index 64e7a6de2d..2325463e1f 100644 --- a/keyboards/ferris/0_2/bling/config.h +++ b/keyboards/ferris/0_2/bling/config.h @@ -20,55 +20,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* LED Drivers */ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SCL -#define DRIVER_1_LED_TOTAL 7 -#define DRIVER_2_LED_TOTAL 7 -#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -#define ENABLE_RGB_MATRIX_ALPHAS_MODS -#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_BREATHING -#define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define ENABLE_RGB_MATRIX_CYCLE_ALL -#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#define ENABLE_RGB_MATRIX_DUAL_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define ENABLE_RGB_MATRIX_RAINDROPS -#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define ENABLE_RGB_MATRIX_HUE_BREATHING -#define ENABLE_RGB_MATRIX_HUE_PENDULUM -#define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_PIXEL_RAIN -#define ENABLE_RGB_MATRIX_PIXEL_FLOW -#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -#define ENABLE_RGB_MATRIX_TYPING_HEATMAP -#define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define ENABLE_RGB_MATRIX_SPLASH -#define ENABLE_RGB_MATRIX_MULTISPLASH -#define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define RGB_MATRIX_LED_COUNT 14 diff --git a/keyboards/ferris/0_2/bling/info.json b/keyboards/ferris/0_2/bling/info.json index 1e9703f599..06a826450b 100644 --- a/keyboards/ferris/0_2/bling/info.json +++ b/keyboards/ferris/0_2/bling/info.json @@ -4,6 +4,51 @@ "pid": "0x0002" }, "rgb_matrix": { + "animations": { + "alphas_mods": true, + "gradient_up_down": true, + "gradient_left_right": true, + "breathing": true, + "band_sat": true, + "band_val": true, + "band_pinwheel_sat": true, + "band_pinwheel_val": true, + "band_spiral_sat": true, + "band_spiral_val": true, + "cycle_all": true, + "cycle_left_right": true, + "cycle_up_down": true, + "rainbow_moving_chevron": true, + "cycle_out_in": true, + "cycle_out_in_dual": true, + "cycle_pinwheel": true, + "cycle_spiral": true, + "dual_beacon": true, + "rainbow_beacon": true, + "rainbow_pinwheels": true, + "raindrops": true, + "jellybean_raindrops": true, + "hue_breathing": true, + "hue_pendulum": true, + "hue_wave": true, + "pixel_rain": true, + "pixel_flow": true, + "pixel_fractal": true, + "typing_heatmap": true, + "digital_rain": true, + "solid_reactive_simple": true, + "solid_reactive": true, + "solid_reactive_wide": true, + "solid_reactive_multiwide": true, + "solid_reactive_cross": true, + "solid_reactive_multicross": true, + "solid_reactive_nexus": true, + "solid_reactive_multinexus": true, + "splash": true, + "multisplash": true, + "solid_splash": true, + "solid_multisplash": true + }, "driver": "is31fl3731" } } diff --git a/keyboards/ferris/0_2/matrix.c b/keyboards/ferris/0_2/matrix.c index af4b045eb8..cf26385f4c 100644 --- a/keyboards/ferris/0_2/matrix.c +++ b/keyboards/ferris/0_2/matrix.c @@ -42,9 +42,7 @@ extern i2c_status_t mcp23017_status; // All address pins of the mcp23017 are connected to the ground on the ferris // | 0 | 1 | 0 | 0 | A2 | A1 | A0 | // | 0 | 1 | 0 | 0 | 0 | 0 | 0 | -#define I2C_ADDR 0b0100000 -#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE) -#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ) +#define I2C_ADDR (0b0100000 << 1) // Register addresses // See https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library/blob/master/Adafruit_MCP23017.h @@ -77,9 +75,9 @@ uint8_t init_mcp23017(void) { // - driving : output : 0 // This means: we will read all the bits on GPIOA // This means: we will write to the pins 0-4 on GPIOB (in select_rows) - uint8_t buf[] = {IODIRA, 0b11111111, 0b11110000}; + uint8_t buf[] = {0b11111111, 0b11110000}; print("before transmit\n"); - mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), MCP23017_I2C_TIMEOUT); + mcp23017_status = i2c_writeReg(I2C_ADDR, IODIRA, buf, sizeof(buf), MCP23017_I2C_TIMEOUT) uprintf("after transmit %i\n", mcp23017_status); if (!mcp23017_status) { // set pull-up @@ -88,8 +86,7 @@ uint8_t init_mcp23017(void) { // - driving : off : 0 // This means: we will read all the bits on GPIOA // This means: we will write to the pins 0-4 on GPIOB (in select_rows) - uint8_t pullup_buf[] = {GPPUA, 0b11111111, 0b11110000}; - mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, pullup_buf, sizeof(pullup_buf), MCP23017_I2C_TIMEOUT); + mcp23017_status = i2c_writeReg(I2C_ADDR, GPPUA, buf, sizeof(buf), MCP23017_I2C_TIMEOUT) uprintf("after transmit2 %i\n", mcp23017_status); } return mcp23017_status; @@ -189,18 +186,13 @@ static matrix_row_t read_cols(uint8_t row) { if (mcp23017_status) { // if there was an error return 0; } else { - uint8_t buf[] = {MCP23017_GPIOA}; - mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), MCP23017_I2C_TIMEOUT); // We read all the pins on GPIOA. // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. // Since the pins connected to eact columns are sequential, and counting from zero up (col 5 -> GPIOA0, col 6 -> GPIOA1 and so on), the only transformation needed is a bitwise not to swap all zeroes and ones. uint8_t data[] = {0}; - if (!mcp23017_status) { - mcp23017_status = i2c_receive(I2C_ADDR_READ, data, sizeof(data), MCP23017_I2C_TIMEOUT); - data[0] = ~(data[0]); - } - return data[0]; + mcp23017_status = i2c_readReg(I2C_ADDR, MCP23017_GPIOA, data, sizeof(data), MCP23017_I2C_TIMEOUT); + return ~data[0]; } } } @@ -244,8 +236,8 @@ static void select_row(uint8_t row) { } else { // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. - uint8_t buf[] = {MCP23017_GPIOB, 0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))}; - mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT); + uint8_t buf[] = {0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))}; + mcp23017_status = i2c_writeReg(I2C_ADDR, MCP23017_GPIOB, buf, sizeof(buf), MCP23017_I2C_TIMEOUT); } } } |