summaryrefslogtreecommitdiff
path: root/keyboards/evyd13
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/evyd13')
-rw-r--r--keyboards/evyd13/atom47/rev2/config.h7
-rw-r--r--keyboards/evyd13/atom47/rev3/config.h7
-rw-r--r--keyboards/evyd13/atom47/rev4/config.h7
-rw-r--r--keyboards/evyd13/atom47/rev5/config.h41
-rw-r--r--keyboards/evyd13/eon40/config.h46
-rw-r--r--keyboards/evyd13/eon40/info.json1
-rw-r--r--keyboards/evyd13/eon40/rules.mk1
-rw-r--r--keyboards/evyd13/eon65/config.h46
-rw-r--r--keyboards/evyd13/eon65/info.json1
-rw-r--r--keyboards/evyd13/eon65/rules.mk2
-rw-r--r--keyboards/evyd13/eon75/config.h46
-rw-r--r--keyboards/evyd13/eon87/config.h46
-rw-r--r--keyboards/evyd13/eon87/info.json1
-rw-r--r--keyboards/evyd13/eon87/rules.mk2
-rw-r--r--keyboards/evyd13/eon95/config.h46
-rw-r--r--keyboards/evyd13/gh80_1800/config.h46
-rw-r--r--keyboards/evyd13/gh80_3700/config.h42
-rw-r--r--keyboards/evyd13/gh80_3700/info.json1
-rw-r--r--keyboards/evyd13/gh80_3700/rules.mk2
-rw-r--r--keyboards/evyd13/gud70/config.h51
-rw-r--r--keyboards/evyd13/minitomic/config.h46
-rw-r--r--keyboards/evyd13/mx5160/config.h45
-rw-r--r--keyboards/evyd13/nt660/config.h47
-rw-r--r--keyboards/evyd13/nt660/info.json1
-rw-r--r--keyboards/evyd13/nt660/rules.mk2
-rw-r--r--keyboards/evyd13/nt750/config.h46
-rw-r--r--keyboards/evyd13/nt980/config.h46
-rw-r--r--keyboards/evyd13/omrontkl/config.h46
-rw-r--r--keyboards/evyd13/plain60/config.h7
-rw-r--r--keyboards/evyd13/plain60/info.json1
-rw-r--r--keyboards/evyd13/plain60/keymaps/audio/keymap.c16
-rw-r--r--keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c24
-rw-r--r--keyboards/evyd13/plain60/keymaps/rgb/keymap.c16
-rw-r--r--keyboards/evyd13/plain60/rules.mk2
-rw-r--r--keyboards/evyd13/pockettype/config.h46
-rw-r--r--keyboards/evyd13/pockettype/info.json1
-rw-r--r--keyboards/evyd13/pockettype/rules.mk2
-rw-r--r--keyboards/evyd13/quackfire/config.h43
-rw-r--r--keyboards/evyd13/quackfire/info.json1
-rw-r--r--keyboards/evyd13/quackfire/rules.mk2
-rw-r--r--keyboards/evyd13/solheim68/config.h46
-rw-r--r--keyboards/evyd13/ta65/config.h7
-rw-r--r--keyboards/evyd13/ta65/info.json1
-rw-r--r--keyboards/evyd13/ta65/rules.mk2
-rw-r--r--keyboards/evyd13/wasdat/config.h1
-rw-r--r--keyboards/evyd13/wasdat_code/config.h35
-rw-r--r--keyboards/evyd13/wasdat_code/info.json1
-rw-r--r--keyboards/evyd13/wasdat_code/rules.mk2
-rw-r--r--keyboards/evyd13/wonderland/config.h4
-rw-r--r--keyboards/evyd13/wonderland/info.json1
-rwxr-xr-xkeyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c60
-rw-r--r--keyboards/evyd13/wonderland/keymaps/keebs/keymap.c20
-rw-r--r--keyboards/evyd13/wonderland/rules.mk2
53 files changed, 79 insertions, 985 deletions
diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h
index a314395501..9791231588 100644
--- a/keyboards/evyd13/atom47/rev2/config.h
+++ b/keyboards/evyd13/atom47/rev2/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -32,12 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/atom47/rev3/config.h b/keyboards/evyd13/atom47/rev3/config.h
index b670b014e5..79813e1a14 100644
--- a/keyboards/evyd13/atom47/rev3/config.h
+++ b/keyboards/evyd13/atom47/rev3/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -32,12 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
/* Backlight configuration
*/
#define BACKLIGHT_PIN B6
diff --git a/keyboards/evyd13/atom47/rev4/config.h b/keyboards/evyd13/atom47/rev4/config.h
index 8d8b477e4a..9b7c8da894 100644
--- a/keyboards/evyd13/atom47/rev4/config.h
+++ b/keyboards/evyd13/atom47/rev4/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -34,12 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
/* Backlight configuration
*/
diff --git a/keyboards/evyd13/atom47/rev5/config.h b/keyboards/evyd13/atom47/rev5/config.h
index 9a751580db..6508566fb3 100644
--- a/keyboards/evyd13/atom47/rev5/config.h
+++ b/keyboards/evyd13/atom47/rev5/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -45,10 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
@@ -65,43 +60,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -118,10 +81,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
diff --git a/keyboards/evyd13/eon40/config.h b/keyboards/evyd13/eon40/config.h
index d52172b6fa..5ef69a0224 100644
--- a/keyboards/evyd13/eon40/config.h
+++ b/keyboards/evyd13/eon40/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -41,15 +40,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -66,43 +56,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -119,9 +77,5 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
#define QMK_ESC_OUTPUT F0 // usually COL
#define QMK_ESC_INPUT B7 // usually ROW
diff --git a/keyboards/evyd13/eon40/info.json b/keyboards/evyd13/eon40/info.json
index e255caf9fc..0e3ce6cc04 100644
--- a/keyboards/evyd13/eon40/info.json
+++ b/keyboards/evyd13/eon40/info.json
@@ -8,6 +8,7 @@
"pid": "0x0140",
"device_version": "0.0.1"
},
+ "community_layouts": ["ortho_4x12", "planck_mit"],
"layouts": {
"LAYOUT_ortho_4x12": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk
index 0c95018913..2ff7298e9a 100644
--- a/keyboards/evyd13/eon40/rules.mk
+++ b/keyboards/evyd13/eon40/rules.mk
@@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
-LAYOUTS = ortho_4x12 planck_mit
LAYOUTS_HAS_RGB = no
# Disable unsupported hardware
diff --git a/keyboards/evyd13/eon65/config.h b/keyboards/evyd13/eon65/config.h
index d5bf5b47fb..fda9ca795e 100644
--- a/keyboards/evyd13/eon65/config.h
+++ b/keyboards/evyd13/eon65/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -38,15 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLED_NUM 10
@@ -73,43 +63,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -125,7 +83,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/eon65/info.json b/keyboards/evyd13/eon65/info.json
index 26f70f5a52..4c7806986c 100644
--- a/keyboards/evyd13/eon65/info.json
+++ b/keyboards/evyd13/eon65/info.json
@@ -8,6 +8,7 @@
"pid": "0xAEB4",
"device_version": "0.0.1"
},
+ "community_layouts": ["65_ansi", "65_ansi_blocker", "65_iso", "65_iso_blocker"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk
index 990f7e04ca..083d411b31 100644
--- a/keyboards/evyd13/eon65/rules.mk
+++ b/keyboards/evyd13/eon65/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker
diff --git a/keyboards/evyd13/eon75/config.h b/keyboards/evyd13/eon75/config.h
index fa571a6bbb..b11a54b3b7 100644
--- a/keyboards/evyd13/eon75/config.h
+++ b/keyboards/evyd13/eon75/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 12
@@ -38,20 +37,11 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_NUM_LOCK_PIN B7
#define LED_CAPS_LOCK_PIN D5
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
@@ -68,43 +58,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -120,7 +78,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/eon87/config.h b/keyboards/evyd13/eon87/config.h
index b23906c15b..b863c7d171 100644
--- a/keyboards/evyd13/eon87/config.h
+++ b/keyboards/evyd13/eon87/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 6
@@ -38,15 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
#define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
#define RGBLED_NUM 12
@@ -73,43 +63,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -125,7 +83,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/eon87/info.json b/keyboards/evyd13/eon87/info.json
index d3bde7565e..4752f18f88 100644
--- a/keyboards/evyd13/eon87/info.json
+++ b/keyboards/evyd13/eon87/info.json
@@ -8,6 +8,7 @@
"pid": "0xAA6B",
"device_version": "0.0.1"
},
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk
index 9f3c003683..bc79aa1a45 100644
--- a/keyboards/evyd13/eon87/rules.mk
+++ b/keyboards/evyd13/eon87/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/evyd13/eon95/config.h b/keyboards/evyd13/eon95/config.h
index c75fa39f79..cf7a494983 100644
--- a/keyboards/evyd13/eon95/config.h
+++ b/keyboards/evyd13/eon95/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 12
@@ -38,20 +37,11 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_NUM_LOCK_PIN B7
#define LED_CAPS_LOCK_PIN D5
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
@@ -68,43 +58,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -121,8 +79,4 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/evyd13/gh80_1800/config.h b/keyboards/evyd13/gh80_1800/config.h
index dd2f44a788..949d3aed06 100644
--- a/keyboards/evyd13/gh80_1800/config.h
+++ b/keyboards/evyd13/gh80_1800/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 10
@@ -38,20 +37,11 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_NUM_LOCK_PIN D6
#define LED_CAPS_LOCK_PIN D7
#define LED_SCROLL_LOCK_PIN D4
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
@@ -68,43 +58,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -120,7 +78,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/gh80_3700/config.h b/keyboards/evyd13/gh80_3700/config.h
index 087a75acf5..5f94873561 100644
--- a/keyboards/evyd13/gh80_3700/config.h
+++ b/keyboards/evyd13/gh80_3700/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 6
@@ -38,15 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN B2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 8
@@ -63,43 +53,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/evyd13/gh80_3700/info.json b/keyboards/evyd13/gh80_3700/info.json
index a5c128d29b..6c49cdcc8f 100644
--- a/keyboards/evyd13/gh80_3700/info.json
+++ b/keyboards/evyd13/gh80_3700/info.json
@@ -8,6 +8,7 @@
"pid": "0x633A",
"device_version": "0.0.1"
},
+ "community_layouts": ["numpad_6x4", "ortho_6x4"],
"layouts": {
"LAYOUT_ortho_6x4": {
"layout": [
diff --git a/keyboards/evyd13/gh80_3700/rules.mk b/keyboards/evyd13/gh80_3700/rules.mk
index 41b8fdd2a8..5e9bf37a1e 100644
--- a/keyboards/evyd13/gh80_3700/rules.mk
+++ b/keyboards/evyd13/gh80_3700/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
ENCODER_ENABLE = yes # Enable support for rotary encoders
-
-LAYOUTS = numpad_6x4 ortho_6x4
diff --git a/keyboards/evyd13/gud70/config.h b/keyboards/evyd13/gud70/config.h
index 6c0482ca77..cd2b13e487 100644
--- a/keyboards/evyd13/gud70/config.h
+++ b/keyboards/evyd13/gud70/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -43,15 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -68,43 +58,6 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -120,7 +73,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/minitomic/config.h b/keyboards/evyd13/minitomic/config.h
index 1da4911b43..50630fa146 100644
--- a/keyboards/evyd13/minitomic/config.h
+++ b/keyboards/evyd13/minitomic/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -38,18 +37,9 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_CAPS_LOCK_PIN C7
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -66,43 +56,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -119,10 +77,6 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
#define QMK_ESC_OUTPUT C6 // usually COL
#define QMK_ESC_INPUT B1 // usually ROW
#define QMK_LED C7
diff --git a/keyboards/evyd13/mx5160/config.h b/keyboards/evyd13/mx5160/config.h
index b280c14149..f98be7fbe4 100644
--- a/keyboards/evyd13/mx5160/config.h
+++ b/keyboards/evyd13/mx5160/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 10
@@ -42,20 +41,12 @@
#define QMK_ESC_OUTPUT C6
#define QMK_ESC_INPUT D1
#define QMK_LED B1
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
#define LED_NUM_LOCK_PIN B2
#define LED_CAPS_LOCK_PIN B1
#define LED_SCROLL_LOCK_PIN B3
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -72,43 +63,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -124,7 +83,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/nt660/config.h b/keyboards/evyd13/nt660/config.h
index 430823bf63..e3313a551e 100644
--- a/keyboards/evyd13/nt660/config.h
+++ b/keyboards/evyd13/nt660/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -39,18 +38,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_CAPS_LOCK_PIN D0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -67,43 +56,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -120,10 +77,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
#define QMK_ESC_OUTPUT D6 // usually COL
#define QMK_ESC_INPUT B7 // usually ROW
#define QMK_LED D0
diff --git a/keyboards/evyd13/nt660/info.json b/keyboards/evyd13/nt660/info.json
index fb7f694e95..9a0cfb4e02 100644
--- a/keyboards/evyd13/nt660/info.json
+++ b/keyboards/evyd13/nt660/info.json
@@ -8,6 +8,7 @@
"pid": "0x1F02",
"device_version": "0.0.1"
},
+ "community_layouts": ["66_ansi", "66_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk
index 42a32340d0..01cc5548ee 100644
--- a/keyboards/evyd13/nt660/rules.mk
+++ b/keyboards/evyd13/nt660/rules.mk
@@ -17,8 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-LAYOUTS = 66_ansi 66_iso
-
# Disable unsupported hardware
RGBLIGHT_SUPPORTED = no
AUDIO_SUPPORTED = no
diff --git a/keyboards/evyd13/nt750/config.h b/keyboards/evyd13/nt750/config.h
index 595c202f53..93c3716442 100644
--- a/keyboards/evyd13/nt750/config.h
+++ b/keyboards/evyd13/nt750/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 6
@@ -42,15 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_CAPS_LOCK_PIN D5
#define LED_PIN_ON_STATE 0
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -67,43 +57,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -119,7 +77,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/nt980/config.h b/keyboards/evyd13/nt980/config.h
index c0502a6268..278f9b89da 100644
--- a/keyboards/evyd13/nt980/config.h
+++ b/keyboards/evyd13/nt980/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 12
@@ -44,15 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_SCROLL_LOCK_PIN B7
#define LED_PIN_ON_STATE 0
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
@@ -69,43 +59,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -121,7 +79,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/omrontkl/config.h b/keyboards/evyd13/omrontkl/config.h
index 7505a5bbad..4a98650e3a 100644
--- a/keyboards/evyd13/omrontkl/config.h
+++ b/keyboards/evyd13/omrontkl/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 6
@@ -38,15 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN D0
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 12
@@ -63,43 +53,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +73,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/plain60/config.h b/keyboards/evyd13/plain60/config.h
index 2cb4ad565c..0c0ed58caf 100644
--- a/keyboards/evyd13/plain60/config.h
+++ b/keyboards/evyd13/plain60/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -31,11 +30,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
#define QMK_ESC_OUTPUT D2 // usually COL
#define QMK_ESC_INPUT B4 // usually ROW
diff --git a/keyboards/evyd13/plain60/info.json b/keyboards/evyd13/plain60/info.json
index 3b08a935dc..060f1a9b60 100644
--- a/keyboards/evyd13/plain60/info.json
+++ b/keyboards/evyd13/plain60/info.json
@@ -8,6 +8,7 @@
"pid": "0x0160",
"device_version": "0.0.1"
},
+ "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_hhkb", "60_iso", "60_tsangan_hhkb"],
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/evyd13/plain60/keymaps/audio/keymap.c b/keyboards/evyd13/plain60/keymaps/audio/keymap.c
index 8383caeb07..1acacd0ff8 100644
--- a/keyboards/evyd13/plain60/keymaps/audio/keymap.c
+++ b/keyboards/evyd13/plain60/keymaps/audio/keymap.c
@@ -12,16 +12,16 @@ enum _layers {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MA] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTL),
[_FN] = LAYOUT(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
AU_TOGG, MU_TOGG, MU_NEXT, CK_TOGG, _______, _______, _______, _______)
};
diff --git a/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c b/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c
index 986f55e040..bb332bad00 100644
--- a/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c
+++ b/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c
@@ -35,23 +35,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DL] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UDIA, DE_PLUS, ______, \
- SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_ODIA,DE_ADIA, DE_HASH, KC_ENT, \
- KC_LSFT, DE_LABK, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY, \
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UDIA, DE_PLUS, ______,
+ SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_ODIA,DE_ADIA, DE_HASH, KC_ENT,
+ KC_LSFT, DE_LABK, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , ______, KC_ALGR, TG(_LED), KC_RCTL ),
[_FUN] = LAYOUT(
- ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL, \
- ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______, \
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, \
+ ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL,
+ ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
+ ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______,
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______,
______, ______, ______, ______ , ______, KC_LEFT, KC_DOWN, KC_RIGHT ),
[_LED] = LAYOUT(
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, QK_BOOT, \
- ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, QK_BOOT,
+ ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______,
+ ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______,
+ ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
______, ______, ______, ______ , ______, ______, TG(_LED), ______ ),
};
diff --git a/keyboards/evyd13/plain60/keymaps/rgb/keymap.c b/keyboards/evyd13/plain60/keymaps/rgb/keymap.c
index 0c4970aac0..62cfe336d5 100644
--- a/keyboards/evyd13/plain60/keymaps/rgb/keymap.c
+++ b/keyboards/evyd13/plain60/keymaps/rgb/keymap.c
@@ -12,16 +12,16 @@ enum _layers {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MA] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTL),
[_FN] = LAYOUT(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______)
};
diff --git a/keyboards/evyd13/plain60/rules.mk b/keyboards/evyd13/plain60/rules.mk
index 262bffdb16..551cb427d7 100644
--- a/keyboards/evyd13/plain60/rules.mk
+++ b/keyboards/evyd13/plain60/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_tsangan_hhkb
diff --git a/keyboards/evyd13/pockettype/config.h b/keyboards/evyd13/pockettype/config.h
index ffb961e87e..d7068599b0 100644
--- a/keyboards/evyd13/pockettype/config.h
+++ b/keyboards/evyd13/pockettype/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -38,15 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -63,43 +53,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +73,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/pockettype/info.json b/keyboards/evyd13/pockettype/info.json
index f54e382e6a..de38119dfc 100644
--- a/keyboards/evyd13/pockettype/info.json
+++ b/keyboards/evyd13/pockettype/info.json
@@ -8,6 +8,7 @@
"pid": "0xFA7D",
"device_version": "0.0.1"
},
+ "community_layouts": ["ortho_4x12"],
"layouts": {
"LAYOUT_ortho_4x12": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/evyd13/pockettype/rules.mk b/keyboards/evyd13/pockettype/rules.mk
index fb9e128716..da69c3073f 100644
--- a/keyboards/evyd13/pockettype/rules.mk
+++ b/keyboards/evyd13/pockettype/rules.mk
@@ -17,8 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-LAYOUTS = ortho_4x12
-
# Disable unsupported hardware
RGBLIGHT_SUPPORTED = no
AUDIO_SUPPORTED = no
diff --git a/keyboards/evyd13/quackfire/config.h b/keyboards/evyd13/quackfire/config.h
index 68cea41604..7105759769 100644
--- a/keyboards/evyd13/quackfire/config.h
+++ b/keyboards/evyd13/quackfire/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8
@@ -39,19 +38,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_CAPS_LOCK_PIN F7
#define LED_SCROLL_LOCK_PIN F6
#define LED_PIN_ON_STATE 0
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 5
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -68,44 +58,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/evyd13/quackfire/info.json b/keyboards/evyd13/quackfire/info.json
index 88b168aa63..97f24d4175 100644
--- a/keyboards/evyd13/quackfire/info.json
+++ b/keyboards/evyd13/quackfire/info.json
@@ -8,6 +8,7 @@
"pid": "0x87C9",
"device_version": "0.0.1"
},
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_tkl_ansi": {
"layout": [
diff --git a/keyboards/evyd13/quackfire/rules.mk b/keyboards/evyd13/quackfire/rules.mk
index 9240b8457d..91521dd909 100644
--- a/keyboards/evyd13/quackfire/rules.mk
+++ b/keyboards/evyd13/quackfire/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/evyd13/solheim68/config.h b/keyboards/evyd13/solheim68/config.h
index b7e782df01..6050fe437b 100644
--- a/keyboards/evyd13/solheim68/config.h
+++ b/keyboards/evyd13/solheim68/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -38,15 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -63,43 +53,11 @@
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +73,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/ta65/config.h b/keyboards/evyd13/ta65/config.h
index ed8e5fd3c6..507aa2b65e 100644
--- a/keyboards/evyd13/ta65/config.h
+++ b/keyboards/evyd13/ta65/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -37,12 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/ta65/info.json b/keyboards/evyd13/ta65/info.json
index f24f599df1..1bb13fbee3 100644
--- a/keyboards/evyd13/ta65/info.json
+++ b/keyboards/evyd13/ta65/info.json
@@ -8,6 +8,7 @@
"pid": "0x7465",
"device_version": "0.0.1"
},
+ "community_layouts": ["65_ansi", "65_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk
index 6d60f1ca7e..3e0064071a 100644
--- a/keyboards/evyd13/ta65/rules.mk
+++ b/keyboards/evyd13/ta65/rules.mk
@@ -17,5 +17,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
-
-LAYOUTS = 65_ansi 65_iso
diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h
index 02db1dc2ab..f519dbffd3 100644
--- a/keyboards/evyd13/wasdat/config.h
+++ b/keyboards/evyd13/wasdat/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8
diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h
index 5449532862..b82d77d691 100644
--- a/keyboards/evyd13/wasdat_code/config.h
+++ b/keyboards/evyd13/wasdat_code/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8
@@ -69,45 +68,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/evyd13/wasdat_code/info.json b/keyboards/evyd13/wasdat_code/info.json
index 4ebbc5aa15..17e9ad990a 100644
--- a/keyboards/evyd13/wasdat_code/info.json
+++ b/keyboards/evyd13/wasdat_code/info.json
@@ -8,6 +8,7 @@
"pid": "0xB00E",
"device_version": "0.0.1"
},
+ "community_layouts": ["fullsize_ansi", "fullsize_iso", "tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_fullsize_ansi": {
"layout": [
diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk
index b37dfa459c..9b51a8b718 100644
--- a/keyboards/evyd13/wasdat_code/rules.mk
+++ b/keyboards/evyd13/wasdat_code/rules.mk
@@ -20,5 +20,3 @@ AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
VPATH += drivers/gpio
SRC += matrix.c sn74x138.c
-
-LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso
diff --git a/keyboards/evyd13/wonderland/config.h b/keyboards/evyd13/wonderland/config.h
index fa56747867..d1a5d43d63 100644
--- a/keyboards/evyd13/wonderland/config.h
+++ b/keyboards/evyd13/wonderland/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -32,9 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
#define LED_NUM_LOCK_PIN B1
#define LED_CAPS_LOCK_PIN B2
#define LED_SCROLL_LOCK_PIN B3
diff --git a/keyboards/evyd13/wonderland/info.json b/keyboards/evyd13/wonderland/info.json
index 8e94e2fe20..27f393458c 100644
--- a/keyboards/evyd13/wonderland/info.json
+++ b/keyboards/evyd13/wonderland/info.json
@@ -8,6 +8,7 @@
"pid": "0xA71C",
"device_version": "0.0.3"
},
+ "community_layouts": ["alice", "alice_split_bs"],
"layouts": {
"LAYOUT_alice_split_bs": {
"layout": [
diff --git a/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c b/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c
index 9933f638a8..b8b62981df 100755
--- a/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c
+++ b/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c
@@ -22,44 +22,44 @@
#define BOTTOM_LED B3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_BASE] = LAYOUT( \
- KC_HOME, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_PGDN, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, PLY_FN1, \
- KC_LOPT, KC_LCMD, SPC_RAI, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT \
+[_BASE] = LAYOUT(
+ KC_HOME, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+ KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_PGDN, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, PLY_FN1,
+ KC_LOPT, KC_LCMD, SPC_RAI, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT
),
-[_FN1] = LAYOUT( \
- KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD, \
- KC_VOLU, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_DEL, \
- KC_VOLD, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY, \
- _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______, \
- _______, _______, _______, _______, _______, _______, _______ \
+[_FN1] = LAYOUT(
+ KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD,
+ KC_VOLU, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_DEL,
+ KC_VOLD, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY,
+ _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______,
+ _______, _______, _______, _______, _______, _______, _______
),
-[_FN2] = LAYOUT( \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______ \
+[_FN2] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
),
-[_ADJUST] = LAYOUT( \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______ \
+[_ADJUST] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
)
/*
-[_BLANK] = LAYOUT( \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______ \
+[_BLANK] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
)
*/
diff --git a/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c b/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c
index d56324567c..47256db374 100644
--- a/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c
+++ b/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c
@@ -7,17 +7,17 @@ enum layers {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT(
- KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \
- KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
- KC_F11, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \
- KC_LCTL, SC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, SC_RAPC, KC_RCTL \
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC,
+ KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_F11, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, SC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, SC_RAPC, KC_RCTL
),
[_FUNC] = LAYOUT(
- RGB_TOG, VK_TOGG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, QK_BOOT, \
- RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, \
- KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, \
- _______, KC_LALT, _______, _______, _______, KC_RALT, _______ \
+ RGB_TOG, VK_TOGG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, QK_BOOT,
+ RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX,
+ KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX,
+ _______, KC_LALT, _______, _______, _______, KC_RALT, _______
)
};
diff --git a/keyboards/evyd13/wonderland/rules.mk b/keyboards/evyd13/wonderland/rules.mk
index e97fa9e99e..659498136c 100644
--- a/keyboards/evyd13/wonderland/rules.mk
+++ b/keyboards/evyd13/wonderland/rules.mk
@@ -18,5 +18,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
AUTO_SHIFT_ENABLE = no
VELOCIKEY_ENABLE = yes
-
-LAYOUTS = alice alice_split_bs