diff options
Diffstat (limited to 'keyboards/evyd13')
53 files changed, 79 insertions, 900 deletions
diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h index a314395501..9791231588 100644 --- a/keyboards/evyd13/atom47/rev2/config.h +++ b/keyboards/evyd13/atom47/rev2/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -32,12 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/evyd13/atom47/rev3/config.h b/keyboards/evyd13/atom47/rev3/config.h index b670b014e5..79813e1a14 100644 --- a/keyboards/evyd13/atom47/rev3/config.h +++ b/keyboards/evyd13/atom47/rev3/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -32,12 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Backlight configuration */ #define BACKLIGHT_PIN B6 diff --git a/keyboards/evyd13/atom47/rev4/config.h b/keyboards/evyd13/atom47/rev4/config.h index 8d8b477e4a..9b7c8da894 100644 --- a/keyboards/evyd13/atom47/rev4/config.h +++ b/keyboards/evyd13/atom47/rev4/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -34,12 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Backlight configuration */ diff --git a/keyboards/evyd13/atom47/rev5/config.h b/keyboards/evyd13/atom47/rev5/config.h index 9a751580db..6508566fb3 100644 --- a/keyboards/evyd13/atom47/rev5/config.h +++ b/keyboards/evyd13/atom47/rev5/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -45,10 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - //#define RGB_DI_PIN E2 //#ifdef RGB_DI_PIN //# define RGBLED_NUM 16 @@ -65,43 +60,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 //#endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,10 +81,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) // The address will vary depending on your wiring: diff --git a/keyboards/evyd13/eon40/config.h b/keyboards/evyd13/eon40/config.h index d52172b6fa..157dc10053 100644 --- a/keyboards/evyd13/eon40/config.h +++ b/keyboards/evyd13/eon40/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -46,10 +45,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -66,43 +61,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -119,9 +82,5 @@ //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - #define QMK_ESC_OUTPUT F0 // usually COL #define QMK_ESC_INPUT B7 // usually ROW diff --git a/keyboards/evyd13/eon40/info.json b/keyboards/evyd13/eon40/info.json index e255caf9fc..0e3ce6cc04 100644 --- a/keyboards/evyd13/eon40/info.json +++ b/keyboards/evyd13/eon40/info.json @@ -8,6 +8,7 @@ "pid": "0x0140", "device_version": "0.0.1" }, + "community_layouts": ["ortho_4x12", "planck_mit"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk index 0c95018913..2ff7298e9a 100644 --- a/keyboards/evyd13/eon40/rules.mk +++ b/keyboards/evyd13/eon40/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -LAYOUTS = ortho_4x12 planck_mit LAYOUTS_HAS_RGB = no # Disable unsupported hardware diff --git a/keyboards/evyd13/eon65/config.h b/keyboards/evyd13/eon65/config.h index d5bf5b47fb..ff5d1ca9a4 100644 --- a/keyboards/evyd13/eon65/config.h +++ b/keyboards/evyd13/eon65/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -43,10 +42,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN E6 #ifdef RGB_DI_PIN #define RGBLED_NUM 10 @@ -73,43 +68,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -125,7 +88,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/eon65/info.json b/keyboards/evyd13/eon65/info.json index 26f70f5a52..4c7806986c 100644 --- a/keyboards/evyd13/eon65/info.json +++ b/keyboards/evyd13/eon65/info.json @@ -8,6 +8,7 @@ "pid": "0xAEB4", "device_version": "0.0.1" }, + "community_layouts": ["65_ansi", "65_ansi_blocker", "65_iso", "65_iso_blocker"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk index 990f7e04ca..083d411b31 100644 --- a/keyboards/evyd13/eon65/rules.mk +++ b/keyboards/evyd13/eon65/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/evyd13/eon75/config.h b/keyboards/evyd13/eon75/config.h index fa571a6bbb..2d7e4b541b 100644 --- a/keyboards/evyd13/eon75/config.h +++ b/keyboards/evyd13/eon75/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -48,10 +47,6 @@ #define LED_SCROLL_LOCK_PIN B0 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN D0 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 12 @@ -68,43 +63,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +83,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/eon87/config.h b/keyboards/evyd13/eon87/config.h index b23906c15b..a9c19af2e3 100644 --- a/keyboards/evyd13/eon87/config.h +++ b/keyboards/evyd13/eon87/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -43,10 +42,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D0 // #ifdef RGB_DI_PIN #define RGBLED_NUM 12 @@ -73,43 +68,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -125,7 +88,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/eon87/info.json b/keyboards/evyd13/eon87/info.json index d3bde7565e..4752f18f88 100644 --- a/keyboards/evyd13/eon87/info.json +++ b/keyboards/evyd13/eon87/info.json @@ -8,6 +8,7 @@ "pid": "0xAA6B", "device_version": "0.0.1" }, + "community_layouts": ["tkl_ansi", "tkl_iso"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk index 9f3c003683..bc79aa1a45 100644 --- a/keyboards/evyd13/eon87/rules.mk +++ b/keyboards/evyd13/eon87/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/eon95/config.h b/keyboards/evyd13/eon95/config.h index c75fa39f79..2af9843efb 100644 --- a/keyboards/evyd13/eon95/config.h +++ b/keyboards/evyd13/eon95/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -48,10 +47,6 @@ #define LED_SCROLL_LOCK_PIN B0 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN D0 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 12 @@ -68,43 +63,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -121,8 +84,4 @@ //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/evyd13/gh80_1800/config.h b/keyboards/evyd13/gh80_1800/config.h index dd2f44a788..d02e4ae5e8 100644 --- a/keyboards/evyd13/gh80_1800/config.h +++ b/keyboards/evyd13/gh80_1800/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -48,10 +47,6 @@ #define LED_SCROLL_LOCK_PIN D4 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN D0 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 12 @@ -68,43 +63,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +83,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/gh80_3700/config.h b/keyboards/evyd13/gh80_3700/config.h index 087a75acf5..5557369b74 100644 --- a/keyboards/evyd13/gh80_3700/config.h +++ b/keyboards/evyd13/gh80_3700/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -43,10 +42,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN B2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 8 @@ -63,43 +58,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/gh80_3700/info.json b/keyboards/evyd13/gh80_3700/info.json index a5c128d29b..6c49cdcc8f 100644 --- a/keyboards/evyd13/gh80_3700/info.json +++ b/keyboards/evyd13/gh80_3700/info.json @@ -8,6 +8,7 @@ "pid": "0x633A", "device_version": "0.0.1" }, + "community_layouts": ["numpad_6x4", "ortho_6x4"], "layouts": { "LAYOUT_ortho_6x4": { "layout": [ diff --git a/keyboards/evyd13/gh80_3700/rules.mk b/keyboards/evyd13/gh80_3700/rules.mk index 41b8fdd2a8..5e9bf37a1e 100644 --- a/keyboards/evyd13/gh80_3700/rules.mk +++ b/keyboards/evyd13/gh80_3700/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow ENCODER_ENABLE = yes # Enable support for rotary encoders - -LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/evyd13/gud70/config.h b/keyboards/evyd13/gud70/config.h index 6c0482ca77..8d4fa7e1ad 100644 --- a/keyboards/evyd13/gud70/config.h +++ b/keyboards/evyd13/gud70/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -48,10 +47,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -68,43 +63,6 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -// #define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -// #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +78,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/minitomic/config.h b/keyboards/evyd13/minitomic/config.h index 1da4911b43..bad9a90a86 100644 --- a/keyboards/evyd13/minitomic/config.h +++ b/keyboards/evyd13/minitomic/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -46,10 +45,6 @@ #define LED_CAPS_LOCK_PIN C7 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -66,43 +61,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -119,10 +82,6 @@ //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - #define QMK_ESC_OUTPUT C6 // usually COL #define QMK_ESC_INPUT B1 // usually ROW #define QMK_LED C7 diff --git a/keyboards/evyd13/mx5160/config.h b/keyboards/evyd13/mx5160/config.h index b280c14149..510c086a77 100644 --- a/keyboards/evyd13/mx5160/config.h +++ b/keyboards/evyd13/mx5160/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -52,10 +51,6 @@ #define LED_SCROLL_LOCK_PIN B3 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -72,43 +67,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -124,7 +87,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/nt660/config.h b/keyboards/evyd13/nt660/config.h index 430823bf63..1268aad097 100644 --- a/keyboards/evyd13/nt660/config.h +++ b/keyboards/evyd13/nt660/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -47,10 +46,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_CAPS_LOCK_PIN D0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -67,43 +62,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,10 +83,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - #define QMK_ESC_OUTPUT D6 // usually COL #define QMK_ESC_INPUT B7 // usually ROW #define QMK_LED D0 diff --git a/keyboards/evyd13/nt660/info.json b/keyboards/evyd13/nt660/info.json index fb7f694e95..9a0cfb4e02 100644 --- a/keyboards/evyd13/nt660/info.json +++ b/keyboards/evyd13/nt660/info.json @@ -8,6 +8,7 @@ "pid": "0x1F02", "device_version": "0.0.1" }, + "community_layouts": ["66_ansi", "66_iso"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk index 42a32340d0..01cc5548ee 100644 --- a/keyboards/evyd13/nt660/rules.mk +++ b/keyboards/evyd13/nt660/rules.mk @@ -17,8 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -LAYOUTS = 66_ansi 66_iso - # Disable unsupported hardware RGBLIGHT_SUPPORTED = no AUDIO_SUPPORTED = no diff --git a/keyboards/evyd13/nt750/config.h b/keyboards/evyd13/nt750/config.h index 595c202f53..4029f1a084 100644 --- a/keyboards/evyd13/nt750/config.h +++ b/keyboards/evyd13/nt750/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -47,10 +46,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -67,43 +62,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -119,7 +82,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/nt980/config.h b/keyboards/evyd13/nt980/config.h index c0502a6268..84b72baf9a 100644 --- a/keyboards/evyd13/nt980/config.h +++ b/keyboards/evyd13/nt980/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -49,10 +48,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - //#define RGB_DI_PIN E2 //#ifdef RGB_DI_PIN //# define RGBLED_NUM 16 @@ -69,43 +64,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 //#endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -121,7 +84,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/omrontkl/config.h b/keyboards/evyd13/omrontkl/config.h index 7505a5bbad..ddb198aa90 100644 --- a/keyboards/evyd13/omrontkl/config.h +++ b/keyboards/evyd13/omrontkl/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -43,10 +42,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN D0 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 12 @@ -63,43 +58,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,7 +78,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/plain60/config.h b/keyboards/evyd13/plain60/config.h index 2cb4ad565c..0c0ed58caf 100644 --- a/keyboards/evyd13/plain60/config.h +++ b/keyboards/evyd13/plain60/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -31,11 +30,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #define QMK_ESC_OUTPUT D2 // usually COL #define QMK_ESC_INPUT B4 // usually ROW diff --git a/keyboards/evyd13/plain60/info.json b/keyboards/evyd13/plain60/info.json index 3b08a935dc..060f1a9b60 100644 --- a/keyboards/evyd13/plain60/info.json +++ b/keyboards/evyd13/plain60/info.json @@ -8,6 +8,7 @@ "pid": "0x0160", "device_version": "0.0.1" }, + "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_hhkb", "60_iso", "60_tsangan_hhkb"], "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/evyd13/plain60/keymaps/audio/keymap.c b/keyboards/evyd13/plain60/keymaps/audio/keymap.c index 8383caeb07..1acacd0ff8 100644 --- a/keyboards/evyd13/plain60/keymaps/audio/keymap.c +++ b/keyboards/evyd13/plain60/keymaps/audio/keymap.c @@ -12,16 +12,16 @@ enum _layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_MA] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTL), [_FN] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, AU_TOGG, MU_TOGG, MU_NEXT, CK_TOGG, _______, _______, _______, _______) }; diff --git a/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c b/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c index 986f55e040..bb332bad00 100644 --- a/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c +++ b/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c @@ -35,23 +35,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DL] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UDIA, DE_PLUS, ______, \ - SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_ODIA,DE_ADIA, DE_HASH, KC_ENT, \ - KC_LSFT, DE_LABK, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UDIA, DE_PLUS, ______, + SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_ODIA,DE_ADIA, DE_HASH, KC_ENT, + KC_LSFT, DE_LABK, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , ______, KC_ALGR, TG(_LED), KC_RCTL ), [_FUN] = LAYOUT( - ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL, \ - ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, \ + ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL, + ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, + ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, ______, ______, ______, ______ , ______, KC_LEFT, KC_DOWN, KC_RIGHT ), [_LED] = LAYOUT( - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, QK_BOOT, \ - ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, QK_BOOT, + ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______, + ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, + ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______ , ______, ______, TG(_LED), ______ ), }; diff --git a/keyboards/evyd13/plain60/keymaps/rgb/keymap.c b/keyboards/evyd13/plain60/keymaps/rgb/keymap.c index 0c4970aac0..62cfe336d5 100644 --- a/keyboards/evyd13/plain60/keymaps/rgb/keymap.c +++ b/keyboards/evyd13/plain60/keymaps/rgb/keymap.c @@ -12,16 +12,16 @@ enum _layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_MA] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTL), [_FN] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______) }; diff --git a/keyboards/evyd13/plain60/rules.mk b/keyboards/evyd13/plain60/rules.mk index 262bffdb16..551cb427d7 100644 --- a/keyboards/evyd13/plain60/rules.mk +++ b/keyboards/evyd13/plain60/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_tsangan_hhkb diff --git a/keyboards/evyd13/pockettype/config.h b/keyboards/evyd13/pockettype/config.h index ffb961e87e..8fbbc71bb6 100644 --- a/keyboards/evyd13/pockettype/config.h +++ b/keyboards/evyd13/pockettype/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -43,10 +42,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -63,43 +58,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,7 +78,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/pockettype/info.json b/keyboards/evyd13/pockettype/info.json index f54e382e6a..de38119dfc 100644 --- a/keyboards/evyd13/pockettype/info.json +++ b/keyboards/evyd13/pockettype/info.json @@ -8,6 +8,7 @@ "pid": "0xFA7D", "device_version": "0.0.1" }, + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] diff --git a/keyboards/evyd13/pockettype/rules.mk b/keyboards/evyd13/pockettype/rules.mk index fb9e128716..da69c3073f 100644 --- a/keyboards/evyd13/pockettype/rules.mk +++ b/keyboards/evyd13/pockettype/rules.mk @@ -17,8 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -LAYOUTS = ortho_4x12 - # Disable unsupported hardware RGBLIGHT_SUPPORTED = no AUDIO_SUPPORTED = no diff --git a/keyboards/evyd13/quackfire/config.h b/keyboards/evyd13/quackfire/config.h index 68cea41604..e989504713 100644 --- a/keyboards/evyd13/quackfire/config.h +++ b/keyboards/evyd13/quackfire/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 8 @@ -48,10 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_SCROLL_LOCK_PIN F6 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 5 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -68,44 +63,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/quackfire/info.json b/keyboards/evyd13/quackfire/info.json index 88b168aa63..97f24d4175 100644 --- a/keyboards/evyd13/quackfire/info.json +++ b/keyboards/evyd13/quackfire/info.json @@ -8,6 +8,7 @@ "pid": "0x87C9", "device_version": "0.0.1" }, + "community_layouts": ["tkl_ansi", "tkl_iso"], "layouts": { "LAYOUT_tkl_ansi": { "layout": [ diff --git a/keyboards/evyd13/quackfire/rules.mk b/keyboards/evyd13/quackfire/rules.mk index 9240b8457d..91521dd909 100644 --- a/keyboards/evyd13/quackfire/rules.mk +++ b/keyboards/evyd13/quackfire/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/solheim68/config.h b/keyboards/evyd13/solheim68/config.h index b7e782df01..acc8af25a5 100644 --- a/keyboards/evyd13/solheim68/config.h +++ b/keyboards/evyd13/solheim68/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -43,10 +42,6 @@ */ // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -63,43 +58,11 @@ // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,7 +78,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/ta65/config.h b/keyboards/evyd13/ta65/config.h index ed8e5fd3c6..507aa2b65e 100644 --- a/keyboards/evyd13/ta65/config.h +++ b/keyboards/evyd13/ta65/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -37,12 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/evyd13/ta65/info.json b/keyboards/evyd13/ta65/info.json index f24f599df1..1bb13fbee3 100644 --- a/keyboards/evyd13/ta65/info.json +++ b/keyboards/evyd13/ta65/info.json @@ -8,6 +8,7 @@ "pid": "0x7465", "device_version": "0.0.1" }, + "community_layouts": ["65_ansi", "65_iso"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk index 6d60f1ca7e..3e0064071a 100644 --- a/keyboards/evyd13/ta65/rules.mk +++ b/keyboards/evyd13/ta65/rules.mk @@ -17,5 +17,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes - -LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h index 02db1dc2ab..f519dbffd3 100644 --- a/keyboards/evyd13/wasdat/config.h +++ b/keyboards/evyd13/wasdat/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 8 diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h index 5449532862..b82d77d691 100644 --- a/keyboards/evyd13/wasdat_code/config.h +++ b/keyboards/evyd13/wasdat_code/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 8 @@ -69,45 +68,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/wasdat_code/info.json b/keyboards/evyd13/wasdat_code/info.json index 4ebbc5aa15..17e9ad990a 100644 --- a/keyboards/evyd13/wasdat_code/info.json +++ b/keyboards/evyd13/wasdat_code/info.json @@ -8,6 +8,7 @@ "pid": "0xB00E", "device_version": "0.0.1" }, + "community_layouts": ["fullsize_ansi", "fullsize_iso", "tkl_ansi", "tkl_iso"], "layouts": { "LAYOUT_fullsize_ansi": { "layout": [ diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk index b37dfa459c..9b51a8b718 100644 --- a/keyboards/evyd13/wasdat_code/rules.mk +++ b/keyboards/evyd13/wasdat_code/rules.mk @@ -20,5 +20,3 @@ AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite VPATH += drivers/gpio SRC += matrix.c sn74x138.c - -LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso diff --git a/keyboards/evyd13/wonderland/config.h b/keyboards/evyd13/wonderland/config.h index fa56747867..d1a5d43d63 100644 --- a/keyboards/evyd13/wonderland/config.h +++ b/keyboards/evyd13/wonderland/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -32,9 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #define LED_NUM_LOCK_PIN B1 #define LED_CAPS_LOCK_PIN B2 #define LED_SCROLL_LOCK_PIN B3 diff --git a/keyboards/evyd13/wonderland/info.json b/keyboards/evyd13/wonderland/info.json index 8e94e2fe20..27f393458c 100644 --- a/keyboards/evyd13/wonderland/info.json +++ b/keyboards/evyd13/wonderland/info.json @@ -8,6 +8,7 @@ "pid": "0xA71C", "device_version": "0.0.3" }, + "community_layouts": ["alice", "alice_split_bs"], "layouts": { "LAYOUT_alice_split_bs": { "layout": [ diff --git a/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c b/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c index 9933f638a8..b8b62981df 100755 --- a/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c +++ b/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c @@ -22,44 +22,44 @@ #define BOTTOM_LED B3 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_BASE] = LAYOUT( \ - KC_HOME, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_PGDN, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, PLY_FN1, \ - KC_LOPT, KC_LCMD, SPC_RAI, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT \ +[_BASE] = LAYOUT( + KC_HOME, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_PGDN, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, PLY_FN1, + KC_LOPT, KC_LCMD, SPC_RAI, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT ), -[_FN1] = LAYOUT( \ - KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD, \ - KC_VOLU, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_DEL, \ - KC_VOLD, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY, \ - _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_FN1] = LAYOUT( + KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD, + KC_VOLU, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_DEL, + KC_VOLD, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY, + _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______, + _______, _______, _______, _______, _______, _______, _______ ), -[_FN2] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_FN2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ), -[_ADJUST] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ) /* -[_BLANK] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_BLANK] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ) */ diff --git a/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c b/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c index d56324567c..47256db374 100644 --- a/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c +++ b/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c @@ -7,17 +7,17 @@ enum layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \ - KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_F11, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ - KC_LCTL, SC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, SC_RAPC, KC_RCTL \ + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, + KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_F11, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, SC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, SC_RAPC, KC_RCTL ), [_FUNC] = LAYOUT( - RGB_TOG, VK_TOGG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, QK_BOOT, \ - RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ -RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, \ - KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, \ - _______, KC_LALT, _______, _______, _______, KC_RALT, _______ \ + RGB_TOG, VK_TOGG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, QK_BOOT, + RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, +RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, + KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, + _______, KC_LALT, _______, _______, _______, KC_RALT, _______ ) }; diff --git a/keyboards/evyd13/wonderland/rules.mk b/keyboards/evyd13/wonderland/rules.mk index e97fa9e99e..659498136c 100644 --- a/keyboards/evyd13/wonderland/rules.mk +++ b/keyboards/evyd13/wonderland/rules.mk @@ -18,5 +18,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no AUTO_SHIFT_ENABLE = no VELOCIKEY_ENABLE = yes - -LAYOUTS = alice alice_split_bs |