summaryrefslogtreecommitdiff
path: root/keyboards/evyd13/quackfire
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/evyd13/quackfire')
-rw-r--r--keyboards/evyd13/quackfire/config.h71
-rw-r--r--keyboards/evyd13/quackfire/info.json11
-rw-r--r--keyboards/evyd13/quackfire/rules.mk8
3 files changed, 11 insertions, 79 deletions
diff --git a/keyboards/evyd13/quackfire/config.h b/keyboards/evyd13/quackfire/config.h
index 68cea41604..8ab3d62a1e 100644
--- a/keyboards/evyd13/quackfire/config.h
+++ b/keyboards/evyd13/quackfire/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
@@ -39,73 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define LED_CAPS_LOCK_PIN F7
-#define LED_SCROLL_LOCK_PIN F6
-#define LED_PIN_ON_STATE 0
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 5
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -122,8 +55,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 6
-#define BOOTMAGIC_LITE_COLUMN 5
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/evyd13/quackfire/info.json b/keyboards/evyd13/quackfire/info.json
index 88b168aa63..b64616a588 100644
--- a/keyboards/evyd13/quackfire/info.json
+++ b/keyboards/evyd13/quackfire/info.json
@@ -8,6 +8,17 @@
"pid": "0x87C9",
"device_version": "0.0.1"
},
+ "indicators": {
+ "caps_lock": "F7",
+ "scroll_lock": "F6",
+ "on_state": 0
+ },
+ "bootmagic": {
+ "matrix": [6, 5]
+ },
+ "processor": "atmega32u4",
+ "bootloader": "qmk-dfu",
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_tkl_ansi": {
"layout": [
diff --git a/keyboards/evyd13/quackfire/rules.mk b/keyboards/evyd13/quackfire/rules.mk
index 9240b8457d..718a1e8d09 100644
--- a/keyboards/evyd13/quackfire/rules.mk
+++ b/keyboards/evyd13/quackfire/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso