summaryrefslogtreecommitdiff
path: root/keyboards/ergodox_infinity/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ergodox_infinity/readme.md')
-rw-r--r--keyboards/ergodox_infinity/readme.md24
1 files changed, 5 insertions, 19 deletions
diff --git a/keyboards/ergodox_infinity/readme.md b/keyboards/ergodox_infinity/readme.md
index 73ee3bc1df..c51bdd7c82 100644
--- a/keyboards/ergodox_infinity/readme.md
+++ b/keyboards/ergodox_infinity/readme.md
@@ -13,18 +13,16 @@ for the left and right halves seperately. To flash them:
- Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util`
- - Build right hand firmware with `make ergodox_infinity:keymapname MASTER=right`
-
- Plug in the right hand keyboard only.
- Press the program button (back of keyboard, above thumb pad).
- - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util MASTER=right`
+ - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util`
More information on the Infinity firmware is available in the [TMK/chibios for
Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md)
-## Infinity Master/Two Halves
+## Infinity Two Halves
The Infinity is two completely independent keyboards, that can connect together.
You have a few options in how you flash the firmware:
@@ -32,21 +30,10 @@ You have a few options in how you flash the firmware:
- Add `#define EE_HANDS` to your config.h, initialize the EEPROM values (see below),
and then flash the same firmware to both halves.
-- Flash the left half, rebuild the firmware with "MASTER=right" and then flash
- the right half. This allows you to plug in either half directly to the
- computer and is what the above instructions do.
-
-- Flash the left half, then flash the same firmware on the right. This only
- works when the left half is plugged directly to the computer and the keymap
- is mirrored. It saves the small extra step of rebuilding with
- "MASTER=right".
-
-- The same as the previous one but with "MASTER=right" when you build the
- firmware, then flash the same firmware to both halves. You just have to
- directly connect the right half to the computer.
+- Flash with the instructions above, which assume the left hand is connected to USB.
- For minor changes such as changing only the keymap without having updated
- any part of the firmware code itself, you can program only the MASTER half,
+ any part of the firmware code itself, you can program only the half connected to USB,
but it is safest to program both halves.
### EE_HANDS initialization
@@ -74,7 +61,6 @@ They only need to be done once, unless you reset the EEPROM later.
- Add `#define EE_HANDS` to the config.h file of your keymap, and build your firmware using
`make ergodox_infinity:keymapname`.
- - After this, you can flash both halves with the same firmware, _without_ having to rebuild with
- "MASTER=right" or risking a mirrored keyboard when connected the wrong way.
+ - After this, you can flash both halves with the same firmware, _without_ risking a mirrored keyboard when connected the wrong way.
If you reset your EEPROM later, you'll have to follow these steps again, though.