summaryrefslogtreecommitdiff
path: root/keyboards/ergodox
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ergodox')
-rw-r--r--keyboards/ergodox/Makefile33
-rw-r--r--keyboards/ergodox/ez/Makefile77
-rw-r--r--keyboards/ergodox/ez/rules.mk76
-rw-r--r--keyboards/ergodox/infinity/Makefile78
-rw-r--r--keyboards/ergodox/infinity/rules.mk77
-rw-r--r--keyboards/ergodox/readme.md12
-rw-r--r--keyboards/ergodox/rules.mk28
7 files changed, 192 insertions, 189 deletions
diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile
index 05fb588d11..7165350050 100644
--- a/keyboards/ergodox/Makefile
+++ b/keyboards/ergodox/Makefile
@@ -1,34 +1,5 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make = Make software.
-#
-# make clean = Clean out built project files.
-#
-# That's pretty much all you need. To compile, always go make clean,
-# followed by make.
-#
-# For advanced users only:
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-#----------------------------------------------------------------------------
SUBPROJECT_DEFAULT = ez
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE ?= no # MIDI controls
-UNICODE_ENABLE ?= yes # Unicode
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
include ../../Makefile
-endif
+endif \ No newline at end of file
diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile
index 37e554b304..191c6bb664 100644
--- a/keyboards/ergodox/ez/Makefile
+++ b/keyboards/ergodox/ez/Makefile
@@ -1,76 +1,3 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make = Make software.
-#
-# make clean = Clean out built project files.
-#
-# That's pretty much all you need. To compile, always go make clean,
-# followed by make.
-#
-# For advanced users only:
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-#----------------------------------------------------------------------------
-
-# # project specific files
-SRC = twimaster.c \
- matrix.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-# comment out to disable the options.
-#
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
include ../../../Makefile
-endif
+endif \ No newline at end of file
diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk
new file mode 100644
index 0000000000..37e554b304
--- /dev/null
+++ b/keyboards/ergodox/ez/rules.mk
@@ -0,0 +1,76 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make = Make software.
+#
+# make clean = Clean out built project files.
+#
+# That's pretty much all you need. To compile, always go make clean,
+# followed by make.
+#
+# For advanced users only:
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+#----------------------------------------------------------------------------
+
+# # project specific files
+SRC = twimaster.c \
+ matrix.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# comment out to disable the options.
+#
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile
index ccb735a485..191c6bb664 100644
--- a/keyboards/ergodox/infinity/Makefile
+++ b/keyboards/ergodox/infinity/Makefile
@@ -1,77 +1,3 @@
-# project specific files
-SRC = matrix.c \
- led.c
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-# KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-# - MKL26Z64 for Teensy LC
-# - MK20DX128 for Teensy 3.0
-# - MK20DX256 for Teensy 3.1 and 3.2
-# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
-# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-# - kl2x for Teensy LC
-# - k20x5 for Teensy 3.0 and Infinity 60%
-# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# - BOARD =
-# - PJRC_TEENSY_LC for Teensy LC
-# - PJRC_TEENSY_3 for Teensy 3.0
-# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-# - MCHCK_K20 for Infinity KB
-#BOARD = MCHCK_K20
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-
-# Build Options
-# comment out to disable the options.
-#
-CUSTOM_MATRIX ?= yes # Custom matrix file
-SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
-LCD_ENABLE ?= yes
-LED_ENABLE ?= yes
-LCD_BACKLIGHT_ENABLE ?= yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
include ../../../Makefile
-endif
-
-ifdef LCD_ENABLE
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
-endif
-
-ifdef LED_ENABLE
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
-endif
+endif \ No newline at end of file
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
new file mode 100644
index 0000000000..ccb735a485
--- /dev/null
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -0,0 +1,77 @@
+# project specific files
+SRC = matrix.c \
+ led.c
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+# KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+# - MKL26Z64 for Teensy LC
+# - MK20DX128 for Teensy 3.0
+# - MK20DX256 for Teensy 3.1 and 3.2
+# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+# - kl2x for Teensy LC
+# - k20x5 for Teensy 3.0 and Infinity 60%
+# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# - BOARD =
+# - PJRC_TEENSY_LC for Teensy LC
+# - PJRC_TEENSY_3 for Teensy 3.0
+# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+# - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+# comment out to disable the options.
+#
+CUSTOM_MATRIX ?= yes # Custom matrix file
+SERIAL_LINK_ENABLE = yes
+VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
+LCD_ENABLE ?= yes
+LED_ENABLE ?= yes
+LCD_BACKLIGHT_ENABLE ?= yes
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
+
+ifdef LCD_ENABLE
+include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
+endif
+
+ifdef LED_ENABLE
+include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+endif
diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index b113ca7dd2..3bbe98fd69 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -72,9 +72,7 @@ Some distributions provide a binary, maybe called `teensy-loader-cli`).
To flash the firmware:
- - Build the firmware with `make keymap=keymapname`, for example `make
- keymap=default`
-
+ - Build the firmware with `make keymapname`, for example `make default`
- This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
`ergodox_ez_default.hex`
@@ -92,21 +90,21 @@ To flash the firmware:
The Infinity is two completely independent keyboards, and needs to be flashed
for the left and right halves seperately. To flash them:
- - Build the firmware with `make keymap=keymapname subproject=infinity`
+ - Build the firmware with `make infinity-keymapname`
- Plug in the left hand keyboard only.
- Press the program button (back of keyboard, above thumb pad).
- - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity`
+ - Install the firmware with `sudo make infinity-keymapname-dfu-util`
- - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right`
+ - Build left hand firmware with `make infinity-keymapname MASTER=right`
- Plug in the right hand keyboard only.
- Press the program button (back of keyboard, above thumb pad).
- - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity MASTER=right`
+ - Install the firmware with `sudo make infinity-keymapname-dfu-util MASTER=right`
More information on the Infinity firmware is available in the [TMK/chibios for
Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md)
diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk
new file mode 100644
index 0000000000..ac63d4eff2
--- /dev/null
+++ b/keyboards/ergodox/rules.mk
@@ -0,0 +1,28 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make = Make software.
+#
+# make clean = Clean out built project files.
+#
+# That's pretty much all you need. To compile, always go make clean,
+# followed by make.
+#
+# For advanced users only:
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+#----------------------------------------------------------------------------
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= yes # Unicode