summaryrefslogtreecommitdiff
path: root/keyboards/ep
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ep')
-rw-r--r--keyboards/ep/40/config.h45
-rw-r--r--keyboards/ep/40/info.json2
-rw-r--r--keyboards/ep/40/rules.mk6
-rw-r--r--keyboards/ep/96/config.h33
-rw-r--r--keyboards/ep/96/info.json2
-rw-r--r--keyboards/ep/96/rules.mk6
-rw-r--r--keyboards/ep/comsn/hs68/config.h4
-rw-r--r--keyboards/ep/comsn/hs68/info.json2
-rw-r--r--keyboards/ep/comsn/hs68/rules.mk6
-rw-r--r--keyboards/ep/comsn/mollydooker/config.h32
-rw-r--r--keyboards/ep/comsn/mollydooker/info.json2
-rw-r--r--keyboards/ep/comsn/mollydooker/rules.mk6
-rw-r--r--keyboards/ep/comsn/tf_longeboye/config.h7
-rw-r--r--keyboards/ep/comsn/tf_longeboye/info.json2
-rw-r--r--keyboards/ep/comsn/tf_longeboye/rules.mk6
15 files changed, 10 insertions, 151 deletions
diff --git a/keyboards/ep/40/config.h b/keyboards/ep/40/config.h
index fb67f5509c..3240274d26 100644
--- a/keyboards/ep/40/config.h
+++ b/keyboards/ep/40/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -39,50 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/ep/40/info.json b/keyboards/ep/40/info.json
index 3c482198d5..ca679e0685 100644
--- a/keyboards/ep/40/info.json
+++ b/keyboards/ep/40/info.json
@@ -7,6 +7,8 @@
"pid": "0x4040",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3, "w":2.25}, {"x":5.25, "y":3, "w":2.75}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/ep/40/rules.mk b/keyboards/ep/40/rules.mk
index d69504a9de..7829a2753b 100644
--- a/keyboards/ep/40/rules.mk
+++ b/keyboards/ep/40/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/ep/96/config.h b/keyboards/ep/96/config.h
index a7d9d1a91b..7b63d2af43 100644
--- a/keyboards/ep/96/config.h
+++ b/keyboards/ep/96/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 6
@@ -41,43 +40,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/ep/96/info.json b/keyboards/ep/96/info.json
index 8f964f670c..2721b1bd5e 100644
--- a/keyboards/ep/96/info.json
+++ b/keyboards/ep/96/info.json
@@ -7,6 +7,8 @@
"pid": "0x9696",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/ep/96/rules.mk b/keyboards/ep/96/rules.mk
index d69504a9de..7829a2753b 100644
--- a/keyboards/ep/96/rules.mk
+++ b/keyboards/ep/96/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/ep/comsn/hs68/config.h b/keyboards/ep/comsn/hs68/config.h
index 7998faf673..b8e2ea8660 100644
--- a/keyboards/ep/comsn/hs68/config.h
+++ b/keyboards/ep/comsn/hs68/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -41,9 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ep/comsn/hs68/info.json b/keyboards/ep/comsn/hs68/info.json
index 631afb029b..718cbe9d88 100644
--- a/keyboards/ep/comsn/hs68/info.json
+++ b/keyboards/ep/comsn/hs68/info.json
@@ -7,6 +7,8 @@
"pid": "0x6868",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk
index 354f194ca2..309e55c9f4 100644
--- a/keyboards/ep/comsn/hs68/rules.mk
+++ b/keyboards/ep/comsn/hs68/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/ep/comsn/mollydooker/config.h b/keyboards/ep/comsn/mollydooker/config.h
index 6949f4a58f..1fe6b875cf 100644
--- a/keyboards/ep/comsn/mollydooker/config.h
+++ b/keyboards/ep/comsn/mollydooker/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -43,21 +42,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
#define RGB_DI_PIN B0
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -76,27 +65,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_VAL_STEP 17
/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
diff --git a/keyboards/ep/comsn/mollydooker/info.json b/keyboards/ep/comsn/mollydooker/info.json
index 58d7bb288c..69641b24b8 100644
--- a/keyboards/ep/comsn/mollydooker/info.json
+++ b/keyboards/ep/comsn/mollydooker/info.json
@@ -7,6 +7,8 @@
"pid": "0x9696",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk
index 81074884fe..7cc66e743d 100644
--- a/keyboards/ep/comsn/mollydooker/rules.mk
+++ b/keyboards/ep/comsn/mollydooker/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/ep/comsn/tf_longeboye/config.h b/keyboards/ep/comsn/tf_longeboye/config.h
index 964705bff3..8dcc87d68c 100644
--- a/keyboards/ep/comsn/tf_longeboye/config.h
+++ b/keyboards/ep/comsn/tf_longeboye/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -43,12 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ep/comsn/tf_longeboye/info.json b/keyboards/ep/comsn/tf_longeboye/info.json
index 3fa58d61c1..227cc54a2e 100644
--- a/keyboards/ep/comsn/tf_longeboye/info.json
+++ b/keyboards/ep/comsn/tf_longeboye/info.json
@@ -7,6 +7,8 @@
"pid": "0x9696",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk
index 717cc07b4b..c58df49ea8 100644
--- a/keyboards/ep/comsn/tf_longeboye/rules.mk
+++ b/keyboards/ep/comsn/tf_longeboye/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 09:57:17 +0000