3 files changed, 2 insertions, 43 deletions
diff --git a/keyboards/doppelganger/config.h b/keyboards/doppelganger/config.h
index dec80c516e..0ee19ed94a 100644
--- a/keyboards/doppelganger/config.h
+++ b/keyboards/doppelganger/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -50,10 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define USE_I2C
 #define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN B4
 // #ifdef RGB_DI_PIN
 #define RGBLED_NUM 2
@@ -72,43 +67,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/doppelganger/info.json b/keyboards/doppelganger/info.json
index e1edf3d77d..7c513539da 100644
--- a/keyboards/doppelganger/info.json
+++ b/keyboards/doppelganger/info.json
@@ -8,6 +8,8 @@
         "pid": "0x4447",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [{"label":"F1", "x":1, "y":0}, {"label":"Esc", "x":2.5, "y":0}, {"label":"1", "x":3.5, "y":0}, {"label":"2", "x":4.5, "y":0}, {"label":"3", "x":5.5, "y":0}, {"label":"4", "x":6.5, "y":0}, {"label":"5", "x":7.5, "y":0}, {"label":"6", "x":8.5, "y":0}, {"label":"7", "x":10.5, "y":0}, {"label":"8", "x":11.5, "y":0}, {"label":"9", "x":12.5, "y":0}, {"label":"0", "x":13.5, "y":0}, {"label":"_", "x":14.5, "y":0}, {"label":"+", "x":15.5, "y":0}, {"x":16.5, "y":0}, {"x":17.5, "y":0}, {"label":"F2", "x":0, "y":1}, {"label":"F3", "x":1, "y":1}, {"label":"Tab", "x":2.5, "y":1, "w":1.5}, {"label":"Q", "x":4, "y":1}, {"label":"W", "x":5, "y":1}, {"label":"E", "x":6, "y":1}, {"label":"R", "x":7, "y":1}, {"label":"T", "x":8, "y":1}, {"label":"Y", "x":10, "y":1}, {"label":"U", "x":11, "y":1}, {"label":"I", "x":12, "y":1}, {"label":"O", "x":13, "y":1}, {"label":"P", "x":14, "y":1}, {"label":"{", "x":15, "y":1}, {"label":"}", "x":16, "y":1}, {"label":"|", "x":17, "y":1, "w":1.5}, {"label":"Pg Up", "x":19, "y":1}, {"label":"F4", "x":0, "y":2}, {"label":"F5", "x":1, "y":2}, {"label":"Caps Lock", "x":2.5, "y":2, "w":1.75}, {"label":"A", "x":4.25, "y":2}, {"label":"S", "x":5.25, "y":2}, {"label":"D", "x":6.25, "y":2}, {"label":"F", "x":7.25, "y":2}, {"label":"G", "x":8.25, "y":2}, {"label":"H", "x":10.25, "y":2}, {"label":"J", "x":11.25, "y":2}, {"label":"K", "x":12.25, "y":2}, {"label":"L", "x":13.25, "y":2}, {"label":":", "x":14.25, "y":2}, {"label":"\"", "x":15.25, "y":2}, {"label":"~", "x":16.25, "y":2}, {"label":"Enter", "x":17.25, "y":2, "w":1.25}, {"label":"Pg Dn", "x":19, "y":2}, {"label":"F6", "x":0, "y":3}, {"label":"F7", "x":1, "y":3}, {"label":"Shift", "x":2.5, "y":3, "w":1.25}, {"label":"|", "x":3.75, "y":3}, {"label":"Z", "x":4.75, "y":3}, {"label":"X", "x":5.75, "y":3}, {"label":"C", "x":6.75, "y":3}, {"label":"V", "x":7.75, "y":3}, {"label":"B", "x":8.75, "y":3}, {"label":"N", "x":10.75, "y":3}, {"label":"M", "x":11.75, "y":3}, {"label":"<", "x":12.75, "y":3}, {"label":">", "x":13.75, "y":3}, {"label":"?", "x":14.75, "y":3}, {"label":"Shift", "x":15.75, "y":3, "w":1.75}, {"label":"Up", "x":17.75, "y":3.25}, {"label":"Fn", "x":19, "y":3}, {"label":"F8", "x":0, "y":4}, {"label":"F9", "x":1, "y":4}, {"label":"Ctrl", "x":2.5, "y":4, "w":1.25}, {"label":"Win", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"x":8.25, "y":4}, {"x":10.25, "y":4, "w":2.75}, {"label":"Alt", "x":13, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"label":"Win", "x":15.25, "y":4, "w":1.25}, {"label":"Left", "x":16.75, "y":4.25}, {"label":"Down", "x":17.75, "y":4.25}, {"label":"Right", "x":18.75, "y":4.25}]
diff --git a/keyboards/doppelganger/rules.mk b/keyboards/doppelganger/rules.mk
index 1ca40bc93d..f1a07bd25e 100644
--- a/keyboards/doppelganger/rules.mk
+++ b/keyboards/doppelganger/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #