6 files changed, 8 insertions, 92 deletions
diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h
index a12b58ce39..a18aebcd58 100644
--- a/keyboards/donutcables/budget96/config.h
+++ b/keyboards/donutcables/budget96/config.h
@@ -17,21 +17,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define RGBLED_NUM 18
 
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
-
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
 
 #define DIODE_DIRECTION COL2ROW
-#define DEBOUNCE 5
-
-#define LED_NUM_LOCK_PIN D0
-#define LED_CAPS_LOCK_PIN D1
 
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
diff --git a/keyboards/donutcables/budget96/info.json b/keyboards/donutcables/budget96/info.json
index 338b3c2451..13d8e8f831 100644
--- a/keyboards/donutcables/budget96/info.json
+++ b/keyboards/donutcables/budget96/info.json
@@ -8,6 +8,12 @@
         "pid": "0xB960",
         "device_version": "2.0.0"
     },
+    "indicators": {
+        "caps_lock": "D1",
+        "num_lock": "D0"
+    },
+    "processor": "atmega32a",
+    "bootloader": "bootloadhid",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":16, "y":0}, {"x":17, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":17, "y":1}, {"x":18, "y":1}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2}, {"x":18, "y":2}, {"x":0, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3, "w":1.25}, {"x":15, "y":3}, {"x":16, "y":3}, {"x":17, "y":3}, {"x":18, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":16, "y":4}, {"x":17, "y":4}, {"x":18, "y":4}, {"x":0, "y":5, "w":1.25}, {"x":1.25, "y":5, "w":1.25}, {"x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}, {"x":16, "y":5}, {"x":17, "y":5}, {"x":18, "y":5}]
diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk
index 4dcdfe886a..03a618b76d 100644
--- a/keyboards/donutcables/budget96/rules.mk
+++ b/keyboards/donutcables/budget96/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32a
-
-# Bootloader selection
-BOOTLOADER = bootloadhid
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/donutcables/scrabblepad/config.h b/keyboards/donutcables/scrabblepad/config.h
index ed761505d5..dc6d1fc84a 100644
--- a/keyboards/donutcables/scrabblepad/config.h
+++ b/keyboards/donutcables/scrabblepad/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 15
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -39,74 +34,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -122,7 +54,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/donutcables/scrabblepad/info.json b/keyboards/donutcables/scrabblepad/info.json
index 513aea53aa..0f805c7057 100644
--- a/keyboards/donutcables/scrabblepad/info.json
+++ b/keyboards/donutcables/scrabblepad/info.json
@@ -8,6 +8,8 @@
     "pid": "0x21D7",
     "device_version": "1.0.0"
   },
+  "processor": "at90usb1286",
+  "bootloader": "halfkay",
   "layouts": {
       "LAYOUT": {
           "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}, {"x":4, "y":5}, {"x":5, "y":5}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":8, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":0, "y":6}, {"x":1, "y":6}, {"x":2, "y":6}, {"x":3, "y":6}, {"x":4, "y":6}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":8, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":12, "y":6}, {"x":13, "y":6}, {"x":14, "y":6}, {"x":0, "y":7}, {"x":1, "y":7}, {"x":2, "y":7}, {"x":3, "y":7}, {"x":4, "y":7}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":8, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}, {"x":12, "y":7}, {"x":13, "y":7}, {"x":14, "y":7}, {"x":0, "y":8}, {"x":1, "y":8}, {"x":2, "y":8}, {"x":3, "y":8}, {"x":4, "y":8}, {"x":5, "y":8}, {"x":6, "y":8}, {"x":7, "y":8}, {"x":8, "y":8}, {"x":9, "y":8}, {"x":10, "y":8}, {"x":11, "y":8}, {"x":12, "y":8}, {"x":13, "y":8}, {"x":14, "y":8}, {"x":0, "y":9}, {"x":1, "y":9}, {"x":2, "y":9}, {"x":3, "y":9}, {"x":4, "y":9}, {"x":5, "y":9}, {"x":6, "y":9}, {"x":7, "y":9}, {"x":8, "y":9}, {"x":9, "y":9}, {"x":10, "y":9}, {"x":11, "y":9}, {"x":12, "y":9}, {"x":13, "y":9}, {"x":14, "y":9}, {"x":0, "y":10}, {"x":1, "y":10}, {"x":2, "y":10}, {"x":3, "y":10}, {"x":4, "y":10}, {"x":5, "y":10}, {"x":6, "y":10}, {"x":7, "y":10}, {"x":8, "y":10}, {"x":9, "y":10}, {"x":10, "y":10}, {"x":11, "y":10}, {"x":12, "y":10}, {"x":13, "y":10}, {"x":14, "y":10}, {"x":0, "y":11}, {"x":1, "y":11}, {"x":2, "y":11}, {"x":3, "y":11}, {"x":4, "y":11}, {"x":5, "y":11}, {"x":6, "y":11}, {"x":7, "y":11}, {"x":8, "y":11}, {"x":9, "y":11}, {"x":10, "y":11}, {"x":11, "y":11}, {"x":12, "y":11}, {"x":13, "y":11}, {"x":14, "y":11}, {"x":0, "y":12}, {"x":1, "y":12}, {"x":2, "y":12}, {"x":3, "y":12}, {"x":4, "y":12}, {"x":5, "y":12}, {"x":6, "y":12}, {"x":7, "y":12}, {"x":8, "y":12}, {"x":9, "y":12}, {"x":10, "y":12}, {"x":11, "y":12}, {"x":12, "y":12}, {"x":13, "y":12}, {"x":14, "y":12}, {"x":0, "y":13}, {"x":1, "y":13}, {"x":2, "y":13}, {"x":3, "y":13}, {"x":4, "y":13}, {"x":5, "y":13}, {"x":6, "y":13}, {"x":7, "y":13}, {"x":8, "y":13}, {"x":9, "y":13}, {"x":10, "y":13}, {"x":11, "y":13}, {"x":12, "y":13}, {"x":13, "y":13}, {"x":14, "y":13}, {"x":0, "y":14}, {"x":1, "y":14}, {"x":2, "y":14}, {"x":3, "y":14}, {"x":4, "y":14}, {"x":5, "y":14}, {"x":6, "y":14}, {"x":7, "y":14}, {"x":8, "y":14}, {"x":9, "y":14}, {"x":10, "y":14}, {"x":11, "y":14}, {"x":12, "y":14}, {"x":13, "y":14}, {"x":14, "y":14}]
diff --git a/keyboards/donutcables/scrabblepad/rules.mk b/keyboards/donutcables/scrabblepad/rules.mk
index 9365ea7c65..84ab7f32b2 100644
--- a/keyboards/donutcables/scrabblepad/rules.mk
+++ b/keyboards/donutcables/scrabblepad/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = at90usb1286
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #