summaryrefslogtreecommitdiff
path: root/keyboards/crazy_keyboard_68
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/crazy_keyboard_68')
-rw-r--r--keyboards/crazy_keyboard_68/config.h46
-rw-r--r--keyboards/crazy_keyboard_68/info.json3
-rw-r--r--keyboards/crazy_keyboard_68/rules.mk8
3 files changed, 3 insertions, 54 deletions
diff --git a/keyboards/crazy_keyboard_68/config.h b/keyboards/crazy_keyboard_68/config.h
index 948da8caa1..b0830ce234 100644
--- a/keyboards/crazy_keyboard_68/config.h
+++ b/keyboards/crazy_keyboard_68/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -39,18 +38,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define LED_CAPS_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
#define RGB_DI_PIN F6
#ifdef RGB_DI_PIN
# define RGBLED_NUM 84
@@ -77,43 +67,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -129,7 +87,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/crazy_keyboard_68/info.json b/keyboards/crazy_keyboard_68/info.json
index 040b29825d..5b8cbcacb7 100644
--- a/keyboards/crazy_keyboard_68/info.json
+++ b/keyboards/crazy_keyboard_68/info.json
@@ -8,6 +8,9 @@
"pid": "0x13DE",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["65_ansi"],
"layouts": {
"LAYOUT_65_ansi": {
"layout": [
diff --git a/keyboards/crazy_keyboard_68/rules.mk b/keyboards/crazy_keyboard_68/rules.mk
index 44f97d07c5..b851d0ab39 100644
--- a/keyboards/crazy_keyboard_68/rules.mk
+++ b/keyboards/crazy_keyboard_68/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = 65_ansi