summaryrefslogtreecommitdiff
path: root/keyboards/clueboard/66_hotswap/gen1
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/clueboard/66_hotswap/gen1')
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/chconf.h714
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/config.h25
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/gen1.h71
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/halconf.h536
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/info.json342
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/mcuconf.h285
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/readme.md16
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/rules.mk21
8 files changed, 247 insertions, 1763 deletions
diff --git a/keyboards/clueboard/66_hotswap/gen1/chconf.h b/keyboards/clueboard/66_hotswap/gen1/chconf.h
deleted file mode 100644
index aac3303705..0000000000
--- a/keyboards/clueboard/66_hotswap/gen1/chconf.h
+++ /dev/null
@@ -1,714 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file rt/templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION 32
-#endif
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY 100000
-#endif
-
-/**
- * @brief Time intervals data size.
- * @note Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE 32
-#endif
-
-/**
- * @brief Time types data size.
- * @note Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE 32
-#endif
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM 0
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM TRUE
-#endif
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP TRUE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS TRUE
-#endif
-
-/**
- * @brief Pipes APIs.
- * @details If enabled then the pipes APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- * kernel.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY TRUE
-#endif
-
-/**
- * @brief Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- * pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
-#endif
-
-/**
- * @brief Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-#endif
-
-/**
- * @brief Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-#endif
-
-/**
- * @brief Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-#endif
-
-/**
- * @brief Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-#endif
-
-/**
- * @brief Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS FALSE
-#endif
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- * just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note It is invoked from within @p _thread_init() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h
index 7c90d05b38..98d9728870 100644
--- a/keyboards/clueboard/66_hotswap/gen1/config.h
+++ b/keyboards/clueboard/66_hotswap/gen1/config.h
@@ -18,37 +18,12 @@
#pragma once
#include "config_common.h"
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xC1ED
-#define PRODUCT_ID 0x2391
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Clueboard
-
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 }
-#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 }
-#define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 }
-#define DIODE_DIRECTION COL2ROW
-
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
// #define DEBOUNCE 6
diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.h b/keyboards/clueboard/66_hotswap/gen1/gen1.h
index 05adf49831..98f9ba1424 100644
--- a/keyboards/clueboard/66_hotswap/gen1/gen1.h
+++ b/keyboards/clueboard/66_hotswap/gen1/gen1.h
@@ -16,74 +16,3 @@
#pragma once
#include "quantum.h"
-/*
- * These are shortcuts to help you work with the various layout options. If your
- * keymap works with one of the LAYOUT_...() macros you are encouraged to use that
- * and to contribute your keymap to the corresponding layout in
- * `qmk_firmware/layouts/community`.
- */
-
-/* Clueboard matrix layout
- * ,-----------------------------------------------------------. ,---.
- * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57|
- * |-----------------------------------------------------------| |---|
- * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67|
- * |-----------------------------------------------------------| `---'
- * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 75|
- * |--------------------------------------------------------------.
- * | 30 | 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85 |86|
- * |------------------------------------------------------------------.
- * | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95|96| 97|
- * `------------------------------------------------------------------'
- * ,-----------------------------------------------------------. ,---.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|
- * |-----------------------------------------------------------| |---|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|
- * |-----------------------------------------------------------| `---'
- * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter |
- * |--------------------------------------------------------------.
- * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up|
- * |------------------------------------------------------------------.
- * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt|
- * `------------------------------------------------------------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-
-#define LAYOUT( \
- k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \
- k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
- k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
- k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \
- k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \
-) { \
- { k00, k01, k02, k03, k04, k05, k06, k07 }, \
- { k10, k11, k12, k13, k14, k15, k16, k17 }, \
- { k20, k21, k22, k23, k24, k25, k26, k27 }, \
- { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
- { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
- { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \
- { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
- { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
- { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
- { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \
-}
-
-#define LAYOUT_66_ansi( \
- k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \
- k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
- k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
- k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \
- k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \
-) { \
- { k00, k01, k02, k03, k04, k05, k06, k07 }, \
- { k10, k11, k12, k13, k14, k15, k16, k17 }, \
- { k20, k21, k22, k23, k24, k25, k26, k27 }, \
- { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
- { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \
- { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \
- { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
- { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
- { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
- { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \
-}
diff --git a/keyboards/clueboard/66_hotswap/gen1/halconf.h b/keyboards/clueboard/66_hotswap/gen1/halconf.h
index 0cb7998f5e..9299e624a4 100644
--- a/keyboards/clueboard/66_hotswap/gen1/halconf.h
+++ b/keyboards/clueboard/66_hotswap/gen1/halconf.h
@@ -1,525 +1,35 @@
-/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
+/* Copyright 2020 QMK
*
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC TRUE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C TRUE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/**
- * @brief Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS FALSE
-#endif
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/**
- * @brief Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- * implementation for algorithms not supported by the underlying
- * hardware.
- * @note Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK FALSE
-#endif
-
-/**
- * @brief Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/**
- * @brief OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20 0x50FF8000U
-#endif
-
-/**
- * @brief OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR 0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 1
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables circular transfers APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR FALSE
-#endif
-
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/**
- * @brief Handling method for SPI CS line.
- * @note Disabling this option saves both code and data space.
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-#endif
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
+/*
+ * This file was auto-generated by:
+ * `qmk chibios-confmigrate -i keyboards/clueboard/66_hotswap/gen1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h`
*/
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
+#pragma once
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
+#define HAL_USE_PWM FALSE
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
+#define HAL_USE_SERIAL_USB FALSE
-/*===========================================================================*/
-/* WSPI driver related settings. */
-/*===========================================================================*/
+#define HAL_USE_SPI FALSE
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT TRUE
-#endif
+#define PAL_USE_CALLBACKS FALSE
-/**
- * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
+#define PAL_USE_WAIT FALSE
-#endif /* HALCONF_H */
+#include_next <halconf.h>
-/** @} */
diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json
index 76c2b44208..bcf66e8afc 100644
--- a/keyboards/clueboard/66_hotswap/gen1/info.json
+++ b/keyboards/clueboard/66_hotswap/gen1/info.json
@@ -1,165 +1,183 @@
{
- "keyboard_name": "Clueboard 66% HotSwap Gen1",
- "maintainer": "skullydazed",
- "width": 16.5,
- "height": 5,
- "layouts": {
- "LAYOUT": {
- "layout": [
- {"x": 0, "y": 0},
- {"x": 1, "y": 0},
- {"x": 2, "y": 0},
- {"x": 3, "y": 0},
- {"x": 4, "y": 0},
- {"x": 5, "y": 0},
- {"x": 6, "y": 0},
- {"x": 7, "y": 0},
- {"x": 8, "y": 0},
- {"x": 9, "y": 0},
- {"x": 10, "y": 0},
- {"x": 11, "y": 0},
- {"x": 12, "y": 0},
- {"x": 13, "y": 0, "w": 2},
-
- {"x": 15.5, "y": 0},
-
- {"x": 0, "y": 1, "w": 1.5},
- {"x": 1.5, "y": 1},
- {"x": 2.5, "y": 1},
- {"x": 3.5, "y": 1},
- {"x": 4.5, "y": 1},
- {"x": 5.5, "y": 1},
- {"x": 6.5, "y": 1},
- {"x": 7.5, "y": 1},
- {"x": 8.5, "y": 1},
- {"x": 9.5, "y": 1},
- {"x": 10.5, "y": 1},
- {"x": 11.5, "y": 1},
- {"x": 12.5, "y": 1},
- {"x": 13.5, "y": 1, "w": 1.5},
-
- {"x": 15.5, "y": 1},
-
- {"x": 0, "y": 2, "w": 1.75},
- {"x": 1.75, "y": 2},
- {"x": 2.75, "y": 2},
- {"x": 3.75, "y": 2},
- {"x": 4.75, "y": 2},
- {"x": 5.75, "y": 2},
- {"x": 6.75, "y": 2},
- {"x": 7.75, "y": 2},
- {"x": 8.75, "y": 2},
- {"x": 9.75, "y": 2},
- {"x": 10.75, "y": 2},
- {"x": 11.75, "y": 2},
- {"x": 12.75, "y": 2, "w": 2.25},
-
- {"x": 0, "y": 3, "w": 2.25},
- {"x": 2.25, "y": 3},
- {"x": 3.25, "y": 3},
- {"x": 4.25, "y": 3},
- {"x": 5.25, "y": 3},
- {"x": 6.25, "y": 3},
- {"x": 7.25, "y": 3},
- {"x": 8.25, "y": 3},
- {"x": 9.25, "y": 3},
- {"x": 10.25, "y": 3},
- {"x": 11.25, "y": 3},
- {"x": 12.25, "y": 3, "w": 2.25},
-
- {"x": 14.5, "y": 3},
-
- {"x": 0, "y": 4, "w": 1.25},
- {"x": 1.25, "y": 4, "w": 1.25},
- {"x": 2.5, "y": 4, "w": 1.25},
- {"x": 3.75, "y": 4, "w": 2.75},
- {"x": 6.5, "y": 4, "w": 2.25},
- {"x": 8.75, "y": 4, "w": 1.25},
- {"x": 10, "y": 4, "w": 1.25},
- {"x": 11.25, "y": 4},
- {"x": 12.25, "y": 4, "w": 1.25},
- {"x": 13.5, "y": 4},
- {"x": 14.5, "y": 4},
- {"x": 15.5, "y": 4}
- ]
- },
- "LAYOUT_66_ansi": {
- "layout": [
- {"x": 0, "y": 0},
- {"x": 1, "y": 0},
- {"x": 2, "y": 0},
- {"x": 3, "y": 0},
- {"x": 4, "y": 0},
- {"x": 5, "y": 0},
- {"x": 6, "y": 0},
- {"x": 7, "y": 0},
- {"x": 8, "y": 0},
- {"x": 9, "y": 0},
- {"x": 10, "y": 0},
- {"x": 11, "y": 0},
- {"x": 12, "y": 0},
- {"x": 13, "y": 0, "w": 2},
-
- {"x": 15.5, "y": 0},
-
- {"x": 0, "y": 1, "w": 1.5},
- {"x": 1.5, "y": 1},
- {"x": 2.5, "y": 1},
- {"x": 3.5, "y": 1},
- {"x": 4.5, "y": 1},
- {"x": 5.5, "y": 1},
- {"x": 6.5, "y": 1},
- {"x": 7.5, "y": 1},
- {"x": 8.5, "y": 1},
- {"x": 9.5, "y": 1},
- {"x": 10.5, "y": 1},
- {"x": 11.5, "y": 1},
- {"x": 12.5, "y": 1},
- {"x": 13.5, "y": 1, "w": 1.5},
-
- {"x": 15.5, "y": 1},
-
- {"x": 0, "y": 2, "w": 1.75},
- {"x": 1.75, "y": 2},
- {"x": 2.75, "y": 2},
- {"x": 3.75, "y": 2},
- {"x": 4.75, "y": 2},
- {"x": 5.75, "y": 2},
- {"x": 6.75, "y": 2},
- {"x": 7.75, "y": 2},
- {"x": 8.75, "y": 2},
- {"x": 9.75, "y": 2},
- {"x": 10.75, "y": 2},
- {"x": 11.75, "y": 2},
- {"x": 12.75, "y": 2, "w": 2.25},
-
- {"x": 0, "y": 3, "w": 2.25},
- {"x": 2.25, "y": 3},
- {"x": 3.25, "y": 3},
- {"x": 4.25, "y": 3},
- {"x": 5.25, "y": 3},
- {"x": 6.25, "y": 3},
- {"x": 7.25, "y": 3},
- {"x": 8.25, "y": 3},
- {"x": 9.25, "y": 3},
- {"x": 10.25, "y": 3},
- {"x": 11.25, "y": 3},
- {"x": 12.25, "y": 3, "w": 2.25},
-
- {"x": 14.5, "y": 3},
-
- {"x": 0, "y": 4, "w": 1.25},
- {"x": 1.25, "y": 4, "w": 1.25},
- {"x": 2.5, "y": 4, "w": 1.25},
- {"x": 3.75, "y": 4, "w": 6.25},
- {"x": 10, "y": 4, "w": 1.25},
- {"x": 11.25, "y": 4},
- {"x": 12.25, "y": 4, "w": 1.25},
-
- {"x": 13.5, "y": 4},
- {"x": 14.5, "y": 4},
- {"x": 15.5, "y": 4}
- ]
- }
+ "manufacturer": "Clueboard",
+ "keyboard_name": "Clueboard 66% HotSwap Gen1",
+ "maintainer": "skullydazed",
+ "height": 5,
+ "width": 16.5,
+ "debounce": 5,
+ "processor": "STM32F303",
+ "board": "QMK_PROTON_C",
+ "diode_direction": "COL2ROW",
+ "features": {
+ "audio": true,
+ "bootmagic": true,
+ "command": true,
+ "console": true,
+ "extrakey": true,
+ "led_matrix": true,
+ "mousekey": true,
+ "nkro": true
+ },
+ "led_matrix": {
+ "driver": "IS31FL3731"
+ },
+ "matrix_pins": {
+ "cols": ["B10", "B2", "B1", "B0", "A7", "B4", "B3", "B7"],
+ "rows": ["B11", "A6", "A3", "A2", "A1", "B5", "B6", "C15", "C14", "C13"]
+ },
+ "usb": {
+ "device_ver": "0x0001",
+ "pid": "0x2391",
+ "vid": "0xC1ED"
+ },
+ "community_layouts": [],
+ "layout_aliases": {
+ "LAYOUT": "LAYOUT_all"
+ },
+ "layouts": {
+ "LAYOUT_66_ansi": {
+ "key_count": 66,
+ "layout": [
+ { "label": "k00", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
+ { "label": "k01", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
+ { "label": "k02", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
+ { "label": "k03", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
+ { "label": "k04", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 },
+ { "label": "k05", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 },
+ { "label": "k06", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 },
+ { "label": "k07", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 },
+ { "label": "k50", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 },
+ { "label": "k51", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 },
+ { "label": "k52", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 },
+ { "label": "k53", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 },
+ { "label": "k54", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 },
+ { "label": "k55", "matrix": [5, 5], "w": 2, "x": 13, "y": 0 },
+ { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 },
+ { "label": "k10", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
+ { "label": "k11", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 },
+ { "label": "k12", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 },
+ { "label": "k13", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 },
+ { "label": "k14", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 },
+ { "label": "k15", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 },
+ { "label": "k16", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 },
+ { "label": "k17", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 },
+ { "label": "k60", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 },
+ { "label": "k61", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 },
+ { "label": "k62", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 },
+ { "label": "k63", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 },
+ { "label": "k64", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 },
+ { "label": "k65", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 },
+ { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 },
+ { "label": "k20", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
+ { "label": "k21", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 },
+ { "label": "k22", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 },
+ { "label": "k23", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 },
+ { "label": "k24", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 },
+ { "label": "k25", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 },
+ { "label": "k26", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 },
+ { "label": "k27", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 },
+ { "label": "k70", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 },
+ { "label": "k71", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 },
+ { "label": "k72", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 },
+ { "label": "k73", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 },
+ { "label": "k75", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 },
+ { "label": "k30", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 },
+ { "label": "k32", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 },
+ { "label": "k33", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 },
+ { "label": "k34", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 },
+ { "label": "k35", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 },
+ { "label": "k36", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 },
+ { "label": "k37", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 },
+ { "label": "k80", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 },
+ { "label": "k81", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 },
+ { "label": "k82", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 },
+ { "label": "k83", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 },
+ { "label": "k85", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 },
+ { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 },
+ { "label": "k40", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 },
+ { "label": "k41", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 },
+ { "label": "k42", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 },
+ { "label": "k46", "matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4 },
+ { "label": "k92", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 },
+ { "label": "k93", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 },
+ { "label": "k94", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 },
+ { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 },
+ { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 },
+ { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 }
+ ]
+ },
+ "LAYOUT_all": {
+ "key_count": 68,
+ "layout": [
+ { "label": "k00", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
+ { "label": "k01", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
+ { "label": "k02", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
+ { "label": "k03", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
+ { "label": "k04", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 },
+ { "label": "k05", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 },
+ { "label": "k06", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 },
+ { "label": "k07", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 },
+ { "label": "k50", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 },
+ { "label": "k51", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 },
+ { "label": "k52", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 },
+ { "label": "k53", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 },
+ { "label": "k54", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 },
+ { "label": "k55", "matrix": [5, 5], "w": 2, "x": 13, "y": 0 },
+ { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 },
+ { "label": "k10", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
+ { "label": "k11", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 },
+ { "label": "k12", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 },
+ { "label": "k13", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 },
+ { "label": "k14", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 },
+ { "label": "k15", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 },
+ { "label": "k16", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 },
+ { "label": "k17", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 },
+ { "label": "k60", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 },
+ { "label": "k61", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 },
+ { "label": "k62", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 },
+ { "label": "k63", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 },
+ { "label": "k64", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 },
+ { "label": "k65", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 },
+ { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 },
+ { "label": "k20", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
+ { "label": "k21", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 },
+ { "label": "k22", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 },
+ { "label": "k23", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 },
+ { "label": "k24", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 },
+ { "label": "k25", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 },
+ { "label": "k26", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 },
+ { "label": "k27", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 },
+ { "label": "k70", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 },
+ { "label": "k71", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 },
+ { "label": "k72", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 },
+ { "label": "k73", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 },
+ { "label": "k75", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 },
+ { "label": "k30", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 },
+ { "label": "k32", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 },
+ { "label": "k33", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 },
+ { "label": "k34", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 },
+ { "label": "k35", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 },
+ { "label": "k36", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 },
+ { "label": "k37", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 },
+ { "label": "k80", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 },
+ { "label": "k81", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 },
+ { "label": "k82", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 },
+ { "label": "k83", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 },
+ { "label": "k85", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 },
+ { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 },
+ { "label": "k40", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 },
+ { "label": "k41", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 },
+ { "label": "k42", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 },
+ { "label": "k45", "matrix": [4, 5], "w": 2.75, "x": 3.75, "y": 4 },
+ { "label": "k46", "matrix": [4, 6], "w": 2.25, "x": 6.5, "y": 4 },
+ { "label": "k90", "matrix": [9, 0], "w": 1.25, "x": 8.75, "y": 4 },
+ { "label": "k92", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 },
+ { "label": "k93", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 },
+ { "label": "k94", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 },
+ { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 },
+ { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 },
+ { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 }
+ ]
}
+ }
}
diff --git a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h
index 2098fd2320..6377ded8fc 100644
--- a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h
+++ b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h
@@ -1,273 +1,40 @@
-/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
+/* Copyright 2020 QMK
*
- * IRQ priorities:
- * 15...0 Lowest...Highest.
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
*
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-#define STM32F303_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_USART2SW STM32_USART2SW_PCLK
-#define STM32_USART3SW STM32_USART3SW_PCLK
-#define STM32_UART4SW STM32_UART4SW_PCLK
-#define STM32_UART5SW STM32_UART5SW_PCLK
-#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY 6
-#define STM32_IRQ_EXTI1_PRIORITY 6
-#define STM32_IRQ_EXTI2_PRIORITY 6
-#define STM32_IRQ_EXTI3_PRIORITY 6
-#define STM32_IRQ_EXTI4_PRIORITY 6
-#define STM32_IRQ_EXTI5_9_PRIORITY 6
-#define STM32_IRQ_EXTI10_15_PRIORITY 6
-#define STM32_IRQ_EXTI16_PRIORITY 6
-#define STM32_IRQ_EXTI17_PRIORITY 15
-#define STM32_IRQ_EXTI18_PRIORITY 6
-#define STM32_IRQ_EXTI19_PRIORITY 15
-#define STM32_IRQ_EXTI20_PRIORITY 15
-#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
-#define STM32_IRQ_EXTI30_32_PRIORITY 6
-#define STM32_IRQ_EXTI33_PRIORITY 6
-#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
-#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
-#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
-#define STM32_IRQ_TIM1_CC_PRIORITY 7
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE FALSE
-#define STM32_ADC_COMPACT_SAMPLES FALSE
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_USE_ADC4 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_ADC4_DMA_PRIORITY 2
-#define STM32_ADC_ADC12_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_IRQ_PRIORITY 5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-
-/*
- * GPT driver system settings.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM6 TRUE
-#define STM32_GPT_USE_TIM7 TRUE
-#define STM32_GPT_USE_TIM8 TRUE
-#define STM32_GPT_USE_TIM15 FALSE
-#define STM32_GPT_USE_TIM16 FALSE
-#define STM32_GPT_USE_TIM17 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
- * I2C driver system settings.
+ * This file was auto-generated by:
+ * `qmk chibios-confmigrate -i keyboards/clueboard/66_hotswap/gen1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h`
*/
-#define STM32_I2C_USE_I2C1 TRUE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 10
-#define STM32_I2C_I2C2_IRQ_PRIORITY 10
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_USE_TIM15 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+#pragma once
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_USE_TIM15 FALSE
-#define STM32_PWM_USE_TIM16 FALSE
-#define STM32_PWM_USE_TIM17 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+#include_next <mcuconf.h>
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_PRESA_VALUE 32
-#define STM32_RTC_PRESS_VALUE 1024
-#define STM32_RTC_CR_INIT 0
-#define STM32_RTC_TAMPCR_INIT 0
+#undef STM32_GPT_USE_TIM15
+#define STM32_GPT_USE_TIM15 FALSE
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM3 FALSE
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
+#undef STM32_PWM_USE_TIM4
+#define STM32_PWM_USE_TIM4 FALSE
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+#undef STM32_SERIAL_USE_USART2
+#define STM32_SERIAL_USE_USART2 FALSE
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
+#undef STM32_SPI_USE_SPI2
+#define STM32_SPI_USE_SPI2 FALSE
-#endif /* MCUCONF_H */
diff --git a/keyboards/clueboard/66_hotswap/gen1/readme.md b/keyboards/clueboard/66_hotswap/gen1/readme.md
new file mode 100644
index 0000000000..036df01c64
--- /dev/null
+++ b/keyboards/clueboard/66_hotswap/gen1/readme.md
@@ -0,0 +1,16 @@
+# Clueboard 66% HotSwap
+
+![Clueboard](https://i.imgur.com/8UmBoNx.jpg)
+
+A fully customizable 66% keyboard with Hot Swap sockets.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Clueboard 66% HotSwap PCB
+ * 2.9 (gen1)
+* Hardware Availability: [clueboard.co](https://clueboard.co/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make clueboard/66_hotswap/gen1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk
index 0f5f71ac6d..33cf11a793 100644
--- a/keyboards/clueboard/66_hotswap/gen1/rules.mk
+++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk
@@ -1,21 +1,4 @@
-# MCU name
-MCU = STM32F303
-
-# LED Configuration
-LED_MATRIX_ENABLE = yes
LED_MATRIX_DRIVER = IS31FL3731
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover
-AUDIO_ENABLE = yes
-# SERIAL_LINK_ENABLE = yes
-
-LAYOUTS = 66_ansi
+# project specific files
+SRC = led.c