4 files changed, 67 insertions, 22 deletions
diff --git a/keyboards/clueboard/66/rev3/config.h b/keyboards/clueboard/66/rev3/config.h
index 218736a889..e7cda4ccf0 100644
--- a/keyboards/clueboard/66/rev3/config.h
+++ b/keyboards/clueboard/66/rev3/config.h
@@ -1,28 +1,59 @@
-#ifndef CLUEBOARD_66_REV3_CONFIG_H
-#define CLUEBOARD_66_REV3_CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
 #define PRODUCT_ID      0x2370
 #define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Clueboard
+#define DESCRIPTION     QMK keyboard firmware for Clueboard
 
 /* key matrix size */
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 8
 
-// ROWS: Top to bottom, COLS: Left to right
-/* Row pin configuration
-* row: 0  1  2  3  4  5  6  7  8  9
-* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
+/* ROWS: Top to bottom, COLS: Left to right
 */
 #define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
-/* Column pin configuration
- * col: 0  1  2  3  4  5  6  7
- * pin: F0 F1 F4 F5 F6 F7 E6 B1
- */
 #define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
 #define UNUSED_PINS
 
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
  /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1
@@ -44,5 +75,3 @@
 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2   // The led to start at
 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 5  // How many LEDs to travel
 #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4    // How many LEDs wide to light up
-
-#endif
diff --git a/keyboards/clueboard/66/rev3/rev3.c b/keyboards/clueboard/66/rev3/rev3.c
index 713d998e6d..195a21a9e8 100644
--- a/keyboards/clueboard/66/rev3/rev3.c
+++ b/keyboards/clueboard/66/rev3/rev3.c
@@ -8,10 +8,6 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     matrix_init_user();
     led_init_ports();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
 }
 
 
diff --git a/keyboards/clueboard/66/rev3/rev3.h b/keyboards/clueboard/66/rev3/rev3.h
index 0f322a5c00..267e6795e7 100644
--- a/keyboards/clueboard/66/rev3/rev3.h
+++ b/keyboards/clueboard/66/rev3/rev3.h
@@ -1,7 +1,6 @@
-#ifndef REV3_H
-#define REV3_H
+#pragma once
 
-#include "66.h"
+#include "quantum.h"
 
 /* Clueboard matrix layout
  * ,-----------------------------------------------------------.  ,---.
@@ -48,7 +47,6 @@
     { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
     { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
 }
-#define KEYMAP LAYOUT
 
 /* LAYOUT_66_ansi, standard 66 key ANSI layout
  */
@@ -92,4 +90,4 @@
     { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 }  \
 }
 
-#endif
+#define KEYMAP LAYOUT
diff --git a/keyboards/clueboard/66/rev3/rules.mk b/keyboards/clueboard/66/rev3/rules.mk
index 54a2685bf6..8c1836351f 100644
--- a/keyboards/clueboard/66/rev3/rules.mk
+++ b/keyboards/clueboard/66/rev3/rules.mk
@@ -1 +1,23 @@
-BACKLIGHT_ENABLE = yes
-\ No newline at end of file
+LAYOUTS = 66_ansi 66_iso
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = yes
+BOOTMAGIC_ENABLE = no 	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes 	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes  	# Console for debug(+400)
+COMMAND_ENABLE = no     # Commands for debug and configuration
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality
+MIDI_ENABLE = no 		    # MIDI controls
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no   # Enable Bluetooth with the Adafruit EZ-Key HID