16 files changed, 14 insertions, 233 deletions
diff --git a/keyboards/ckeys/handwire_101/config.h b/keyboards/ckeys/handwire_101/config.h
index 0b9db50d2e..3170959841 100755
--- a/keyboards/ckeys/handwire_101/config.h
+++ b/keyboards/ckeys/handwire_101/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -39,45 +38,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-//#define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-//#define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 // Audio Click
 //#define AUDIO_CLICKY
 
diff --git a/keyboards/ckeys/handwire_101/info.json b/keyboards/ckeys/handwire_101/info.json
index 344c34e5d8..3d270685c5 100644
--- a/keyboards/ckeys/handwire_101/info.json
+++ b/keyboards/ckeys/handwire_101/info.json
@@ -8,6 +8,8 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layout_aliases": {
         "LAYOUT": "LAYOUT_ortho_4x4"
     },
diff --git a/keyboards/ckeys/handwire_101/readme.md b/keyboards/ckeys/handwire_101/readme.md
index 281fbddc7c..2e152b39ea 100755
--- a/keyboards/ckeys/handwire_101/readme.md
+++ b/keyboards/ckeys/handwire_101/readme.md
@@ -14,7 +14,7 @@ The laser cutting file is ideal for Ponoko's P1 board size.
 
 If you want to reflash the pre-installed firmware, use the `.bin` file for Proton C and the `.hex` file for Pro Micro builds. Flash with the QMK Toolbox or via the command line.
 
-Building for Proton C: `make ckeys/handwire_101:default CTPC=yes`
+Building for Proton C: `make ckeys/handwire_101:default CONVERT_TO=proton_c`
 Building for Pro Micro: `make ckeys/handwire_101:default`
 
 Pre-built firmware files (and laser cutting case files) can be found here: https://github.com/c-keys/handwire
diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk
index 3131bb405a..4cbb58307a 100755
--- a/keyboards/ckeys/handwire_101/rules.mk
+++ b/keyboards/ckeys/handwire_101/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h
index c482a41acd..e08fd8d222 100644
--- a/keyboards/ckeys/nakey/config.h
+++ b/keyboards/ckeys/nakey/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,49 +38,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/ckeys/nakey/info.json b/keyboards/ckeys/nakey/info.json
index 1f1e67fedf..453ad39b13 100644
--- a/keyboards/ckeys/nakey/info.json
+++ b/keyboards/ckeys/nakey/info.json
@@ -8,6 +8,9 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "halfkay",
+  "community_layouts": ["numpad_5x4"],
   "layouts": {
     "LAYOUT_numpad_5x4": {
       "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}]
diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk
index fcdb039968..b6e2a5f9a4 100644
--- a/keyboards/ckeys/nakey/rules.mk
+++ b/keyboards/ckeys/nakey/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #
@@ -15,5 +9,3 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = numpad_5x4
diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h
index 07e0ec394d..3064f0147c 100644
--- a/keyboards/ckeys/obelus/config.h
+++ b/keyboards/ckeys/obelus/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -40,44 +39,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ckeys/obelus/info.json b/keyboards/ckeys/obelus/info.json
index 7c0629fd5e..36d31c14bd 100644
--- a/keyboards/ckeys/obelus/info.json
+++ b/keyboards/ckeys/obelus/info.json
@@ -8,6 +8,9 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
+  "community_layouts": ["ortho_4x4"],
   "layouts": {
     "LAYOUT_ortho_4x4": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk
index 97e2b0beb5..08744b16ba 100644
--- a/keyboards/ckeys/obelus/rules.mk
+++ b/keyboards/ckeys/obelus/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,5 +10,3 @@ NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 MIDI_ENABLE = yes           # MIDI support
 AUDIO_ENABLE = yes           # Audio output
-
-LAYOUTS = ortho_4x4
diff --git a/keyboards/ckeys/thedora/config.h b/keyboards/ckeys/thedora/config.h
index 721e8977d6..323b6ae365 100755
--- a/keyboards/ckeys/thedora/config.h
+++ b/keyboards/ckeys/thedora/config.h
@@ -16,7 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 #define ENCODERS_PAD_A { B13 }
 #define ENCODERS_PAD_B { B15 }
@@ -33,18 +32,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-//#define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-//#define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -54,27 +41,6 @@
 
 #define DAC_SAMPLE_MAX 65535U
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 // Audio Click
 
 // Music Mode Polyphony
diff --git a/keyboards/ckeys/thedora/info.json b/keyboards/ckeys/thedora/info.json
index 311ccec843..66b2e37845 100644
--- a/keyboards/ckeys/thedora/info.json
+++ b/keyboards/ckeys/thedora/info.json
@@ -8,6 +8,9 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "STM32F303",
+  "bootloader": "stm32-dfu",
+  "board": "QMK_PROTON_C",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/ckeys/thedora/rules.mk b/keyboards/ckeys/thedora/rules.mk
index ea0154859b..ac8d5677b2 100755
--- a/keyboards/ckeys/thedora/rules.mk
+++ b/keyboards/ckeys/thedora/rules.mk
@@ -1,10 +1,3 @@
-# MCU name
-MCU = STM32F303
-BOARD = QMK_PROTON_C
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/ckeys/washington/config.h b/keyboards/ckeys/washington/config.h
index 2f68d3222a..7e85ac2544 100644
--- a/keyboards/ckeys/washington/config.h
+++ b/keyboards/ckeys/washington/config.h
@@ -15,7 +15,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 3
@@ -40,68 +39,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ENCODERS_PAD_A { D4 }
 #define ENCODERS_PAD_B { C6 }
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -117,7 +63,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ckeys/washington/info.json b/keyboards/ckeys/washington/info.json
index 20e83faf2b..6c364dff1c 100644
--- a/keyboards/ckeys/washington/info.json
+++ b/keyboards/ckeys/washington/info.json
@@ -8,6 +8,8 @@
         "pid": "0x002A",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":0, "y":0.75}, {"x":0.5, "y":1.75}, {"x":1.5, "y":2}]
diff --git a/keyboards/ckeys/washington/rules.mk b/keyboards/ckeys/washington/rules.mk
index f5b9339de7..87154d95c9 100644
--- a/keyboards/ckeys/washington/rules.mk
+++ b/keyboards/ckeys/washington/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #