diff options
Diffstat (limited to 'keyboards/capsunlocked')
20 files changed, 13 insertions, 143 deletions
diff --git a/keyboards/capsunlocked/cu24/config.h b/keyboards/capsunlocked/cu24/config.h index a290f062e3..5d25beb5ee 100644 --- a/keyboards/capsunlocked/cu24/config.h +++ b/keyboards/capsunlocked/cu24/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -57,44 +56,11 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/capsunlocked/cu24/info.json b/keyboards/capsunlocked/cu24/info.json index e9a77c119a..03e87e6da6 100644 --- a/keyboards/capsunlocked/cu24/info.json +++ b/keyboards/capsunlocked/cu24/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_grid": { "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}] diff --git a/keyboards/capsunlocked/cu24/rules.mk b/keyboards/capsunlocked/cu24/rules.mk index 87e6fffce0..0dc735b9cd 100644 --- a/keyboards/capsunlocked/cu24/rules.mk +++ b/keyboards/capsunlocked/cu24/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/capsunlocked/cu65/config.h b/keyboards/capsunlocked/cu65/config.h index bf2055cb50..442620c3b6 100644 --- a/keyboards/capsunlocked/cu65/config.h +++ b/keyboards/capsunlocked/cu65/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -39,43 +38,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/capsunlocked/cu65/info.json b/keyboards/capsunlocked/cu65/info.json index 8217dde0ea..8f91a34974 100644 --- a/keyboards/capsunlocked/cu65/info.json +++ b/keyboards/capsunlocked/cu65/info.json @@ -8,6 +8,9 @@ "pid": "0x0065", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["65_ansi_blocker", "65_iso_blocker", "65_iso_blocker_split_bs"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/capsunlocked/cu65/rules.mk b/keyboards/capsunlocked/cu65/rules.mk index 6a7c885faf..ab2c49da70 100644 --- a/keyboards/capsunlocked/cu65/rules.mk +++ b/keyboards/capsunlocked/cu65/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/capsunlocked/cu7/config.h b/keyboards/capsunlocked/cu7/config.h index 7d51039cee..ab2cca6bcd 100644 --- a/keyboards/capsunlocked/cu7/config.h +++ b/keyboards/capsunlocked/cu7/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 3 @@ -44,9 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/capsunlocked/cu7/info.json b/keyboards/capsunlocked/cu7/info.json index b9d9671b97..64416b0264 100644 --- a/keyboards/capsunlocked/cu7/info.json +++ b/keyboards/capsunlocked/cu7/info.json @@ -8,6 +8,8 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/capsunlocked/cu7/rules.mk b/keyboards/capsunlocked/cu7/rules.mk index 6dfedb28b8..c5c4d8f35f 100644 --- a/keyboards/capsunlocked/cu7/rules.mk +++ b/keyboards/capsunlocked/cu7/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/capsunlocked/cu75/config.h b/keyboards/capsunlocked/cu75/config.h index 1000c8eef5..98f6e6c338 100644 --- a/keyboards/capsunlocked/cu75/config.h +++ b/keyboards/capsunlocked/cu75/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define DIODE_DIRECTION COL2ROW #define MATRIX_ROWS 6 @@ -42,13 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ #define BACKLIGHT_LEVELS 8 #define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} @@ -58,27 +50,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/capsunlocked/cu75/cu75.c b/keyboards/capsunlocked/cu75/cu75.c index 690d72055a..fff0c10ef6 100644 --- a/keyboards/capsunlocked/cu75/cu75.c +++ b/keyboards/capsunlocked/cu75/cu75.c @@ -98,7 +98,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) return process_record_user(keycode, record); } -void reset_keyboard_kb(){ +void reset_keyboard_kb(void){ #ifdef WATCHDOG_ENABLE MCUSR = 0; wdt_disable(); diff --git a/keyboards/capsunlocked/cu75/info.json b/keyboards/capsunlocked/cu75/info.json index 3ab7427b6c..c6a6fe8be8 100644 --- a/keyboards/capsunlocked/cu75/info.json +++ b/keyboards/capsunlocked/cu75/info.json @@ -8,6 +8,8 @@ "pid": "0x6062", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.75}, {"x":6.5, "y":5}, {"x":7.5, "y":5, "w":2.5}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] diff --git a/keyboards/capsunlocked/cu75/rules.mk b/keyboards/capsunlocked/cu75/rules.mk index d3979a9149..e48941c949 100644 --- a/keyboards/capsunlocked/cu75/rules.mk +++ b/keyboards/capsunlocked/cu75/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/capsunlocked/cu80/v1/config.h b/keyboards/capsunlocked/cu80/v1/config.h index d51e337a78..1a8acf6618 100644 --- a/keyboards/capsunlocked/cu80/v1/config.h +++ b/keyboards/capsunlocked/cu80/v1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -29,9 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/capsunlocked/cu80/v1/info.json b/keyboards/capsunlocked/cu80/v1/info.json index df4a67d243..72b2e681c9 100644 --- a/keyboards/capsunlocked/cu80/v1/info.json +++ b/keyboards/capsunlocked/cu80/v1/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["tkl_iso", "tkl_ansi"], "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"\u00ac", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"\"", "x":2, "y":1.5}, {"label":"\u00a3", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] diff --git a/keyboards/capsunlocked/cu80/v1/rules.mk b/keyboards/capsunlocked/cu80/v1/rules.mk index 6bfd2008a8..6fe874e748 100644 --- a/keyboards/capsunlocked/cu80/v1/rules.mk +++ b/keyboards/capsunlocked/cu80/v1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = tkl_iso tkl_ansi diff --git a/keyboards/capsunlocked/cu80/v2_ansi/config.h b/keyboards/capsunlocked/cu80/v2_ansi/config.h index 83477fff89..3199b57da4 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/config.h +++ b/keyboards/capsunlocked/cu80/v2_ansi/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/capsunlocked/cu80/v2_ansi/info.json b/keyboards/capsunlocked/cu80/v2_ansi/info.json index e477f3d587..09bf2e334c 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/info.json +++ b/keyboards/capsunlocked/cu80/v2_ansi/info.json @@ -2,7 +2,6 @@ "manufacturer": "CapsUnlocked", "maintainer": "rys / maz0r", "bootloader": "atmel-dfu", - "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, diff --git a/keyboards/capsunlocked/cu80/v2_iso/config.h b/keyboards/capsunlocked/cu80/v2_iso/config.h index 72f24eaabe..167bf871f1 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/config.h +++ b/keyboards/capsunlocked/cu80/v2_iso/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/capsunlocked/cu80/v2_iso/info.json b/keyboards/capsunlocked/cu80/v2_iso/info.json index 55543ea4e5..0c71c940c1 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/info.json +++ b/keyboards/capsunlocked/cu80/v2_iso/info.json @@ -2,7 +2,6 @@ "manufacturer": "CapsUnlocked", "maintainer": "rys / maz0r", "bootloader": "atmel-dfu", - "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, |