summaryrefslogtreecommitdiff
path: root/keyboards/bthlabs
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/bthlabs')
-rw-r--r--keyboards/bthlabs/geekpad/config.h48
-rw-r--r--keyboards/bthlabs/geekpad/info.json2
-rw-r--r--keyboards/bthlabs/geekpad/rules.mk6
3 files changed, 2 insertions, 54 deletions
diff --git a/keyboards/bthlabs/geekpad/config.h b/keyboards/bthlabs/geekpad/config.h
index c579773d0e..52f4fb3844 100644
--- a/keyboards/bthlabs/geekpad/config.h
+++ b/keyboards/bthlabs/geekpad/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 3
@@ -39,10 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -51,45 +46,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_VAL_STEP 8
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -105,7 +61,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/bthlabs/geekpad/info.json b/keyboards/bthlabs/geekpad/info.json
index 270ce3a567..d68530dadf 100644
--- a/keyboards/bthlabs/geekpad/info.json
+++ b/keyboards/bthlabs/geekpad/info.json
@@ -8,6 +8,8 @@
"pid": "0x4257",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "caterina",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk
index 5d3b05abd2..4d82dff69a 100644
--- a/keyboards/bthlabs/geekpad/rules.mk
+++ b/keyboards/bthlabs/geekpad/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
# Build Options
# change yes to no to disable
#