diff options
Diffstat (limited to 'keyboards/blockey')
| -rw-r--r-- | keyboards/blockey/config.h | 35 | ||||
| -rw-r--r-- | keyboards/blockey/info.json | 2 | ||||
| -rw-r--r-- | keyboards/blockey/keymaps/eucalyn/keymap.c | 20 | ||||
| -rw-r--r-- | keyboards/blockey/rules.mk | 6 |
4 files changed, 12 insertions, 51 deletions
diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h index b65691bd19..f2c2485d8f 100644 --- a/keyboards/blockey/config.h +++ b/keyboards/blockey/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -57,45 +56,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/blockey/info.json b/keyboards/blockey/info.json index 4e584d24bb..404614fd99 100644 --- a/keyboards/blockey/info.json +++ b/keyboards/blockey/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [{"label":"`", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"Back Space", "x":13, "y":0}, {"label":"Tab", "x":0.16, "y":1}, {"label":"Q", "x":1.16, "y":1}, {"label":"W", "x":2.16, "y":1}, {"label":"E", "x":3.16, "y":1}, {"label":"R", "x":4.16, "y":1}, {"label":"T", "x":5.16, "y":1}, {"label":"Y", "x":6.16, "y":1}, {"label":"U", "x":7.16, "y":1}, {"label":"I", "x":8.16, "y":1}, {"label":"O", "x":9.16, "y":1}, {"label":"P", "x":10.16, "y":1}, {"label":"[", "x":11.16, "y":1}, {"label":"]", "x":12.16, "y":1}, {"label":"\\", "x":13.16, "y":1}, {"label":"LCtrl", "x":0.33, "y":2}, {"label":"A", "x":1.33, "y":2}, {"label":"S", "x":2.33, "y":2}, {"label":"D", "x":3.33, "y":2}, {"label":"F", "x":4.33, "y":2}, {"label":"G", "x":5.33, "y":2}, {"label":"H", "x":6.33, "y":2}, {"label":"J", "x":7.33, "y":2}, {"label":"K", "x":8.33, "y":2}, {"label":"L", "x":9.33, "y":2}, {"label":";", "x":10.33, "y":2}, {"label":"\"", "x":11.33, "y":2}, {"label":"Enter", "x":12.66, "y":2}, {"label":"LShift", "x":0.5, "y":3}, {"label":"Z", "x":1.5, "y":3}, {"label":"X", "x":2.5, "y":3}, {"label":"C", "x":3.5, "y":3}, {"label":"V", "x":4.5, "y":3}, {"label":"B", "x":5.5, "y":3}, {"label":"N", "x":6.5, "y":3}, {"label":"M", "x":7.5, "y":3}, {"label":",", "x":8.5, "y":3}, {"label":".", "x":9.5, "y":3}, {"label":"/", "x":10.5, "y":3}, {"label":"Up", "x":11.5, "y":3}, {"label":"Fn", "x":12.83, "y":3}, {"label":"Esc", "x":0, "y":4}, {"label":"Caps Lock", "x":1, "y":4}, {"label":"LAlt", "x":2, "y":4}, {"label":"LGUI", "x":3, "y":4}, {"label":"Space", "x":4, "y":4, "w":6}, {"label":"Left", "x":10.5, "y":4}, {"label":"Down", "x":11.5, "y":4}, {"label":"Right", "x":12.5, "y":4}] diff --git a/keyboards/blockey/keymaps/eucalyn/keymap.c b/keyboards/blockey/keymaps/eucalyn/keymap.c index 99564cae16..3a6d1fecd1 100644 --- a/keyboards/blockey/keymaps/eucalyn/keymap.c +++ b/keyboards/blockey/keymaps/eucalyn/keymap.c @@ -22,18 +22,18 @@ extern rgblight_config_t rgblight_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_COMM, KC_DOT, KC_SCLN, KC_M, KC_R, KC_D, KC_Y, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_LCTL, KC_A, KC_O, KC_E, KC_I, KC_U, KC_G, KC_T, KC_K, KC_S, KC_N, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_B, KC_H, KC_J, KC_L, KC_SLSH, KC_UP, MO(1), \ - KC_ESC, KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_COMM, KC_DOT, KC_SCLN, KC_M, KC_R, KC_D, KC_Y, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LCTL, KC_A, KC_O, KC_E, KC_I, KC_U, KC_G, KC_T, KC_K, KC_S, KC_N, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_B, KC_H, KC_J, KC_L, KC_SLSH, KC_UP, MO(1), + KC_ESC, KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ - _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, \ - _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ), }; diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk index 7afe6055f0..08022075e7 100644 --- a/keyboards/blockey/rules.mk +++ b/keyboards/blockey/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # |