5 files changed, 11 insertions, 15 deletions
diff --git a/keyboards/basekeys/slice/rev1_rgb/config.h b/keyboards/basekeys/slice/rev1_rgb/config.h
index 996e538ae3..975b0f0f90 100644
--- a/keyboards/basekeys/slice/rev1_rgb/config.h
+++ b/keyboards/basekeys/slice/rev1_rgb/config.h
@@ -28,11 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* RGB LED */
 #ifdef RGBLIGHT_ENABLE
-#define RGBLED_NUM 69    // Number of LEDs. backlight x69
-#define RGBLED_SPLIT { 34, 35 }
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/basekeys/slice/rev1_rgb/info.json b/keyboards/basekeys/slice/rev1_rgb/info.json
index 38a6e8398a..947146004c 100644
--- a/keyboards/basekeys/slice/rev1_rgb/info.json
+++ b/keyboards/basekeys/slice/rev1_rgb/info.json
@@ -20,7 +20,10 @@
         "pin": "D3"
     },
     "rgblight": {
-        "max_brightness": 120
+        "hue_steps": 10,
+        "led_count": 69,
+        "max_brightness": 120,
+        "split_count": [34, 35]
     },
     "processor": "atmega32u4",
     "bootloader": "caterina",
diff --git a/keyboards/basekeys/slice/rev1_rgb/rules.mk b/keyboards/basekeys/slice/rev1_rgb/rules.mk
index e9d1e52c16..1e24ec177f 100644
--- a/keyboards/basekeys/slice/rev1_rgb/rules.mk
+++ b/keyboards/basekeys/slice/rev1_rgb/rules.mk
@@ -12,6 +12,5 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = no            # Enable N-Key Rollover
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 OLED_ENABLE = yes
-OLED_DRIVER = SSD1306     # Disable OLED driver.
 
 LTO_ENABLE = yes
diff --git a/keyboards/basekeys/trifecta/config.h b/keyboards/basekeys/trifecta/config.h
index 85ae15513e..5a6b326043 100644
--- a/keyboards/basekeys/trifecta/config.h
+++ b/keyboards/basekeys/trifecta/config.h
@@ -20,10 +20,6 @@
 
 /* RGB LED */
 #ifdef RGBLIGHT_ENABLE
-#define RGBLED_NUM 80    // Number of LEDs. backlight x69
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -53,10 +49,6 @@
 #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 
 /* Disable the animations you don't want/need.  You will need to disable a good number of these    *
  * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
diff --git a/keyboards/basekeys/trifecta/info.json b/keyboards/basekeys/trifecta/info.json
index 3cc2c19f8b..5d35e7210c 100644
--- a/keyboards/basekeys/trifecta/info.json
+++ b/keyboards/basekeys/trifecta/info.json
@@ -27,8 +27,15 @@
         "pin": "E6"
     },
     "rgblight": {
+        "hue_steps": 10,
+        "led_count": 80,
         "max_brightness": 128
     },
+    "rgb_matrix": {
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
    "layouts": {