3 files changed, 2 insertions, 42 deletions
diff --git a/keyboards/atset/at12/config.h b/keyboards/atset/at12/config.h
index d27b4b646a..8607713ee1 100644
--- a/keyboards/atset/at12/config.h
+++ b/keyboards/atset/at12/config.h
@@ -15,7 +15,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* Key matrix size */
 #define MATRIX_ROWS 4
@@ -27,42 +26,7 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
-
- */
-//#define FORCE_NKRO
-
diff --git a/keyboards/atset/at12/info.json b/keyboards/atset/at12/info.json
index 28a535db48..75945900e9 100644
--- a/keyboards/atset/at12/info.json
+++ b/keyboards/atset/at12/info.json
@@ -7,6 +7,8 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
   "layouts": {
     "LAYOUT": {
       "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}]
diff --git a/keyboards/atset/at12/rules.mk b/keyboards/atset/at12/rules.mk
index 73ac281e0b..5356b24d77 100644
--- a/keyboards/atset/at12/rules.mk
+++ b/keyboards/atset/at12/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #