7 files changed, 8 insertions, 80 deletions
diff --git a/keyboards/ai03/equinox/config.h b/keyboards/ai03/equinox/config.h
index ab7b14094f..6813676493 100644
--- a/keyboards/ai03/equinox/config.h
+++ b/keyboards/ai03/equinox/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -39,11 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
@@ -58,45 +52,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -112,7 +72,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ai03/equinox/keymaps/crd/keymap.c b/keyboards/ai03/equinox/keymaps/crd/keymap.c
index b945dc16d5..a3203cd312 100644
--- a/keyboards/ai03/equinox/keymaps/crd/keymap.c
+++ b/keyboards/ai03/equinox/keymaps/crd/keymap.c
@@ -14,12 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include QMK_KEYBOARD_H
-/*
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
-    K300, K301, K302,     K304,       K306,       K308,   K309, K310, K311  \
-*/
 
 #define KC_CTES RCTL_T(KC_ESC)
 #define KC_BSM1 LT(1, KC_BSPC)
diff --git a/keyboards/ai03/equinox/rev0/info.json b/keyboards/ai03/equinox/rev0/info.json
new file mode 100644
index 0000000000..dd190d18ee
--- /dev/null
+++ b/keyboards/ai03/equinox/rev0/info.json
@@ -0,0 +1,4 @@
+{
+    "processor": "atmega32u2",
+    "bootloader": "atmel-dfu"
+}
diff --git a/keyboards/ai03/equinox/rev0/rules.mk b/keyboards/ai03/equinox/rev0/rules.mk
index 9d7635000a..5e28d2cc45 100644
--- a/keyboards/ai03/equinox/rev0/rules.mk
+++ b/keyboards/ai03/equinox/rev0/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u2
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/ai03/equinox/rev1/config.h b/keyboards/ai03/equinox/rev1/config.h
deleted file mode 100644
index dfaa2d3689..0000000000
--- a/keyboards/ai03/equinox/rev1/config.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
-Copyright 2019 Ryota Goto
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
diff --git a/keyboards/ai03/equinox/rev1/info.json b/keyboards/ai03/equinox/rev1/info.json
new file mode 100644
index 0000000000..dd190d18ee
--- /dev/null
+++ b/keyboards/ai03/equinox/rev1/info.json
@@ -0,0 +1,4 @@
+{
+    "processor": "atmega32u2",
+    "bootloader": "atmel-dfu"
+}
diff --git a/keyboards/ai03/equinox/rev1/rules.mk b/keyboards/ai03/equinox/rev1/rules.mk
index 9d7635000a..5e28d2cc45 100644
--- a/keyboards/ai03/equinox/rev1/rules.mk
+++ b/keyboards/ai03/equinox/rev1/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u2
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #