diff options
Diffstat (limited to 'keyboards/acheron/shark')
| -rw-r--r-- | keyboards/acheron/shark/alpha/config.h | 48 | ||||
| -rw-r--r-- | keyboards/acheron/shark/alpha/info.json | 4 | ||||
| -rw-r--r-- | keyboards/acheron/shark/alpha/rules.mk | 9 | ||||
| -rw-r--r-- | keyboards/acheron/shark/beta/config.h | 3 | ||||
| -rw-r--r-- | keyboards/acheron/shark/beta/info.json | 3 | ||||
| -rwxr-xr-x | keyboards/acheron/shark/beta/keymaps/gondolindrim/keymap.c | 9 | ||||
| -rw-r--r-- | keyboards/acheron/shark/beta/rules.mk | 7 |
7 files changed, 11 insertions, 72 deletions
diff --git a/keyboards/acheron/shark/alpha/config.h b/keyboards/acheron/shark/alpha/config.h index ae05d76333..e45d721a01 100644 --- a/keyboards/acheron/shark/alpha/config.h +++ b/keyboards/acheron/shark/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -53,15 +52,6 @@ B0, which is unconnected on the PCB #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 3 -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -78,45 +68,11 @@ B0, which is unconnected on the PCB // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -132,7 +88,3 @@ B0, which is unconnected on the PCB //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/acheron/shark/alpha/info.json b/keyboards/acheron/shark/alpha/info.json index 435ea843aa..0db6134e0b 100644 --- a/keyboards/acheron/shark/alpha/info.json +++ b/keyboards/acheron/shark/alpha/info.json @@ -6,6 +6,10 @@ "pid": "0x5368", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/acheron/shark/alpha/rules.mk b/keyboards/acheron/shark/alpha/rules.mk index a5b2141884..27db06a044 100644 --- a/keyboards/acheron/shark/alpha/rules.mk +++ b/keyboards/acheron/shark/alpha/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -19,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes -LAYOUTS = ortho_4x12 - # Disable unsupported hardware RGBLIGHT_SUPPORTED = no AUDIO_SUPPORTED = no diff --git a/keyboards/acheron/shark/beta/config.h b/keyboards/acheron/shark/beta/config.h index c0d4b66b13..7c56f2d258 100644 --- a/keyboards/acheron/shark/beta/config.h +++ b/keyboards/acheron/shark/beta/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 4 #define MATRIX_COLS 12 @@ -26,8 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { A8 , B14, A4 , A3 } #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/acheron/shark/beta/info.json b/keyboards/acheron/shark/beta/info.json index e763f04484..615e9a91b9 100644 --- a/keyboards/acheron/shark/beta/info.json +++ b/keyboards/acheron/shark/beta/info.json @@ -4,6 +4,9 @@ "pid": "0x5369", "device_version": "0.0.2" }, + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/acheron/shark/beta/keymaps/gondolindrim/keymap.c b/keyboards/acheron/shark/beta/keymaps/gondolindrim/keymap.c index fd7f556b56..ffd104c771 100755 --- a/keyboards/acheron/shark/beta/keymaps/gondolindrim/keymap.c +++ b/keyboards/acheron/shark/beta/keymaps/gondolindrim/keymap.c @@ -15,7 +15,6 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "config_common.h" #define MEDIA_KEY_DELAY 10 #define ALT_TAB_DELAY 1000 @@ -187,7 +186,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { uint32_t held_click_timer = 0; bool is_click_held = false; bool is_shift_held = false; -bool automatic_hold_cycle = false; // This flag registers if the encoder hold was automatically cycled +bool automatic_hold_cycle = false; // This flag registers if the encoder hold was automatically cycled // This bool records if LALT is pressed or not. Due to the automatic disabling of the ALT-TAB of the ALTTABS custom keystroke, the automatic disabling can un-register KC_LALT even when the LALT key is phisically pressed. Hence there needs to be two bools: one that keebs track of the ALT-TAB activity and one that keeps track of LALT so that the automatic disabling will not disable LALT if it is phisically pressed. bool is_lalt_pressed = false; @@ -213,7 +212,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; // Skip all further processing of this key case KC_LALT: // If this is not defined, if the encoder is activated in the alt-tab mode while the LALT key is pressed, the menu goes away. if (record->event.pressed) is_lalt_pressed = true; - else is_lalt_pressed = false; + else is_lalt_pressed = false; return true; case ENCMUP: case ENCMDN: @@ -225,7 +224,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (!is_alt_tab_active) { is_alt_tab_active = true; register_code(KC_LALT); - + } tap_code16(keycode == ALTTABF ? KC_TAB : S(KC_TAB)); // Due to S(KC_TAB), the 16-bit tap_code16 is needed. alt_tab_timer = timer_read32(); @@ -252,7 +251,7 @@ void housekeeping_task_user(void) { is_alt_tab_active = false; } } -/* This piece of the code checks for the encoder push timer. If the encoder push interval was less than encoder_click_delay then it is automatically processed by process_record_user by triggering the current mode's click key. However, if the encoder push is held for more time than the defined delay, then the encoder hold "cycles", that is, gets activated and the timer needs to be reset. This does three things: +/* This piece of the code checks for the encoder push timer. If the encoder push interval was less than encoder_click_delay then it is automatically processed by process_record_user by triggering the current mode's click key. However, if the encoder push is held for more time than the defined delay, then the encoder hold "cycles", that is, gets activated and the timer needs to be reset. This does three things: - (1) Sets the automatic_hold_cycle flag which prevents process_record_user from triggering the click key when the push is released - (2) Processes the current mode's hold key in process_record_user - (3) Resets the click timer diff --git a/keyboards/acheron/shark/beta/rules.mk b/keyboards/acheron/shark/beta/rules.mk index 0347228300..b4a94395c6 100644 --- a/keyboards/acheron/shark/beta/rules.mk +++ b/keyboards/acheron/shark/beta/rules.mk @@ -1,9 +1,3 @@ -MCU = STM32F411 -BOARD = GENERIC_STM32_F411XE - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -20,7 +14,6 @@ BACKLIGHT_DRIVER = pwm LTO_ENABLE = no ENCODER_ENABLE = yes -LAYOUTS = ortho_4x12 EEPROM_DRIVER = i2c # Enter lower-power sleep mode when on the ChibiOS idle thread |