summaryrefslogtreecommitdiff
path: root/keyboards/4pplet/waffling60/rev_e/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/4pplet/waffling60/rev_e/readme.md')
-rw-r--r--keyboards/4pplet/waffling60/rev_e/readme.md20
1 files changed, 20 insertions, 0 deletions
diff --git a/keyboards/4pplet/waffling60/rev_e/readme.md b/keyboards/4pplet/waffling60/rev_e/readme.md
new file mode 100644
index 0000000000..ee13539e5d
--- /dev/null
+++ b/keyboards/4pplet/waffling60/rev_e/readme.md
@@ -0,0 +1,20 @@
+# waffling60
+
+A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support. Revision E adds underglow and 6u space support.
+
+More info: https://github.com/4pplet/waffling60
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: [waffling60](https://github.com/4pplet/waffling60)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make 4pplet/waffling60/rev_e:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Short the reset-header (labled BL/RESET) on the back of the PCB for about 2 seconds for the keyboard to enter DFU. When in DFU, it's ready to flash the firmware. If using a APM MCU it will not automatically reset after flash. Simply short the reset-header for a very short time to just reset the PCB, alternatively unplug and repluck the USB-cable to the keyboard.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.