4 files changed, 15 insertions, 91 deletions
diff --git a/keyboards/40percentclub/sixpack/config.h b/keyboards/40percentclub/sixpack/config.h
index b43f26e4f2..071eecddd4 100644
--- a/keyboards/40percentclub/sixpack/config.h
+++ b/keyboards/40percentclub/sixpack/config.h
@@ -17,89 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 3
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define DIRECT_PINS { \
-    { D4, C6, D7 }, \
-    { E6, B4, B5 }  \
-}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Backlight */
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_PINS { F4, F5 } // Top Row, Bottom Row
-
-/* LED Indicators */
-#define LED_PIN_ON_STATE 0
-#define LED_CAPS_LOCK_PIN B0 // RX Led
-#define LED_NUM_LOCK_PIN D5  // TX Led
-
-// #define RGB_DI_PIN B1 // PB1 on expansion connector
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/40percentclub/sixpack/info.json b/keyboards/40percentclub/sixpack/info.json
index b99c24a617..9c3015b5dd 100644
--- a/keyboards/40percentclub/sixpack/info.json
+++ b/keyboards/40percentclub/sixpack/info.json
@@ -8,6 +8,20 @@
       "pid": "0x5350",
       "device_version": "10.0.1"
     },
+    "indicators": {
+      "caps_lock": "B0",
+      "num_lock": "D5",
+      "on_state": 0
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "matrix_pins": {
+      "direct": [
+        ["D4", "C6", "D7"],
+        ["E6", "B4", "B5"]
+      ]
+    },
+    "community_layouts": ["ortho_2x3"],
     "layouts": {
         "LAYOUT_ortho_2x3": {
           "layout": [
diff --git a/keyboards/40percentclub/sixpack/keymaps/fkeys/keymap.c b/keyboards/40percentclub/sixpack/keymaps/fkeys/keymap.c
index 8ca5a5a27b..4164620b5c 100644
--- a/keyboards/40percentclub/sixpack/keymaps/fkeys/keymap.c
+++ b/keyboards/40percentclub/sixpack/keymaps/fkeys/keymap.c
@@ -26,7 +26,7 @@ enum {
 };
 
 // Tap Dance definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     // Tap once for F13 to F18, twice for F19 to F24
     [F13F19] = ACTION_TAP_DANCE_DOUBLE(KC_F13, KC_F19), [F14F20] = ACTION_TAP_DANCE_DOUBLE(KC_F14, KC_F20), [F15F21] = ACTION_TAP_DANCE_DOUBLE(KC_F15, KC_F21),
     [F16F22] = ACTION_TAP_DANCE_DOUBLE(KC_F16, KC_F22), [F17F23] = ACTION_TAP_DANCE_DOUBLE(KC_F17, KC_F23), [F18F24] = ACTION_TAP_DANCE_DOUBLE(KC_F18, KC_F24)
diff --git a/keyboards/40percentclub/sixpack/rules.mk b/keyboards/40percentclub/sixpack/rules.mk
index dea0f63ee9..254b0bc7bd 100644
--- a/keyboards/40percentclub/sixpack/rules.mk
+++ b/keyboards/40percentclub/sixpack/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,5 +10,3 @@ NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = ortho_2x3