summaryrefslogtreecommitdiff
path: root/keyboard
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard')
-rw-r--r--keyboard/IIgs_Standard/Makefile95
-rw-r--r--keyboard/IIgs_Standard/README43
-rw-r--r--keyboard/IIgs_Standard/config.h68
-rw-r--r--keyboard/IIgs_Standard/doc/PIN_BYPASS.jpgbin0 -> 329437 bytes
-rw-r--r--keyboard/IIgs_Standard/doc/Teensy++_Mod.jpgbin0 -> 74137 bytes
-rwxr-xr-xkeyboard/IIgs_Standard/hid_listen.macbin0 -> 13524 bytes
-rw-r--r--keyboard/IIgs_Standard/keymap.c136
-rw-r--r--keyboard/IIgs_Standard/led.c24
-rw-r--r--keyboard/IIgs_Standard/matrix.c324
9 files changed, 690 insertions, 0 deletions
diff --git a/keyboard/IIgs_Standard/Makefile b/keyboard/IIgs_Standard/Makefile
new file mode 100644
index 0000000000..c18e9720c7
--- /dev/null
+++ b/keyboard/IIgs_Standard/Makefile
@@ -0,0 +1,95 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = IIgs_Standard
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+#MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = no # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/IIgs_Standard/README b/keyboard/IIgs_Standard/README
new file mode 100644
index 0000000000..d7c3935e4c
--- /dev/null
+++ b/keyboard/IIgs_Standard/README
@@ -0,0 +1,43 @@
+Alternative Controller for Apple IIgs/Standard(M0116)
+JeffreySung(nattyman@gmail.com)
+
+===============================
+
+Feature
+-------
+- Replaceable keyboard controller for Apple IIgs(A9M0330)/Standard(M0116)
+- Teensy++ 2.0 required
+- Some signal bypass required
+- ADB keyboard doesn't use matrix for modifier keys. With virtual row for modifier keys, these keys are merged into key matrix.
+- Power key couldn't be used because power key is not connected to controller.
+
+History
+=======
+- 2012.09.17 First Release
+
+Build
+=====
+0. Just Type "Make" and return.
+
+Hardware
+========
+PJRC Teensy
+-----------
+0. The following ports should not be connected to board.
+ From top view of Teensy++, from GND and counter clock wise.
+ -7,26(in keyboard PCB, these pins are VDD,GND)
+ -30,31(in Teensy++, these pins are Ref,GND respectively)
+ -5,6(D2,D3 for bluetooth in future)
+1. Bypass 31 pin(from board) to E4(Teensy)
+2. Bypass 30 pin(from board) to F2(Teensy)
+3. Refer doc directory
+
+To Do
+=====
+0. Caps Lock connect
+1. Layer Change by toggling Clear Key
+2. Eject Key add. (following files should be modified.)
+ common/usb_keycodes.h
+ common/keyboard.c
+3. Use bluetooth
+EOF
diff --git a/keyboard/IIgs_Standard/config.h b/keyboard/IIgs_Standard/config.h
new file mode 100644
index 0000000000..e12eea7d8b
--- /dev/null
+++ b/keyboard/IIgs_Standard/config.h
@@ -0,0 +1,68 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+
+/* USB Device descriptor parameter */
+/* for Apple
+#define VENDOR_ID 0x05AC
+#define PRODUCT_ID 0xBEE0
+*/
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xBEE0
+#define DEVICE_VER 0x0202
+#define MANUFACTURER t.m.k.
+#define PRODUCT Apple Desktop Bus Keyboard
+
+
+/* message strings */
+#define DESCRIPTION Apple M0116/A9M0660 keyboard firmware
+
+
+/* matrix size */
+#define MATRIX_ROWS 11 // last row is virtual for modifier
+#define MATRIX_COLS 8
+/* define if matrix has ghost */
+#define MATRIX_HAS_GHOST
+/* Set 0 if need no debouncing */
+#define DEBOUNCE 5
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
+ keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* layer switching */
+#define LAYER_SWITCH_DELAY 100
+#define LAYER_SEND_FN_TERM 300
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+# define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+#endif
diff --git a/keyboard/IIgs_Standard/doc/PIN_BYPASS.jpg b/keyboard/IIgs_Standard/doc/PIN_BYPASS.jpg
new file mode 100644
index 0000000000..2998f0c3f8
--- /dev/null
+++ b/keyboard/IIgs_Standard/doc/PIN_BYPASS.jpg
Binary files differ
diff --git a/keyboard/IIgs_Standard/doc/Teensy++_Mod.jpg b/keyboard/IIgs_Standard/doc/Teensy++_Mod.jpg
new file mode 100644
index 0000000000..146c1ab93c
--- /dev/null
+++ b/keyboard/IIgs_Standard/doc/Teensy++_Mod.jpg
Binary files differ
diff --git a/keyboard/IIgs_Standard/hid_listen.mac b/keyboard/IIgs_Standard/hid_listen.mac
new file mode 100755
index 0000000000..8758fdf886
--- /dev/null
+++ b/keyboard/IIgs_Standard/hid_listen.mac
Binary files differ
diff --git a/keyboard/IIgs_Standard/keymap.c b/keyboard/IIgs_Standard/keymap.c
new file mode 100644
index 0000000000..8efd2ee0e4
--- /dev/null
+++ b/keyboard/IIgs_Standard/keymap.c
@@ -0,0 +1,136 @@
+/*
+Copyright 2012 Jeffrey Sung <nattyman@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * Keymap for Apple IIgs/Standard Keyboard
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+#define KEYMAP( \
+ R3C7, R3C6, R3C5, R3C4, R3C3, R3C2, R3C1, R8C1, R8C0, R3C0, R0C0, R0C1, R0C2, R0C3, R4C4, R4C5, R4C6, R4C7, \
+ R9C7, R9C6, R9C5, R9C4, R9C3, R9C2, R9C1, R9C0, R1C0, R1C1, R1C2, R1C3, R1C4, R2C4, R2C5, R2C6, R2C3, \
+ R10C0,R7C7, R7C6, R7C5, R7C4, R7C3, R7C2, R7C1, R7C0, R0C4, R1C6, R1C7, R1C5, R2C0, R2C1, R2C2, R2C7, \
+ R10C1,R6C7, R6C6, R6C5, R6C4, R6C3, R6C2, R6C1, R6C0, R0C5, R0C6, R4C0, R4C1, R4C2, \
+ R10C4,R10C2,R10C3,R5C4, R5C7, R5C5, R5C6, R5C0, R5C2, R0C7, R5C1, R5C3, R4C3 \
+) { \
+ { R0C0, R0C1, R0C2, R0C3, R0C4, R0C5, R0C6, R0C7 }, \
+ { R1C0, R1C1, R1C2, R1C3, R1C4, R1C5, R1C6, R1C7 }, \
+ { R2C0, R2C1, R2C2, R2C3, R2C4, R2C5, R2C6, R2C7 }, \
+ { R3C0, R3C1, R3C2, R3C3, R3C4, R3C5, R3C6, R3C7 }, \
+ { R4C0, R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R4C7 }, \
+ { R5C0, R5C1, R5C2, R5C3, R5C4, R5C5, R5C6, R5C7 }, \
+ { R6C0, R6C1, R6C2, R6C3, R6C4, R6C5, R6C6, R6C7 }, \
+ { R7C0, R7C1, R7C2, R7C3, R7C4, R7C5, R7C6, R7C7 }, \
+ { R8C0, R8C1, KB_NO, KB_NO, KB_NO,KB_NO, KB_NO, KB_NO }, \
+ { R9C0, R9C1, R9C2, R9C3, R9C4, R9C5, R9C6, R9C7 }, \
+ { R10C0,R10C1, R10C2, R10C3, R10C4,KB_NO, KB_NO, KB_NO} \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+ 0, // Fn0
+ 1, // Fn1
+ 2, // Fn2
+ 3, // Fn3
+ 4, // Fn4
+ 0, // Fn5
+ 3, // Fn6
+ 3 // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+ KB_NO, // Fn0
+ KB_NO, // Fn1
+ KB_SLSH, // Fn2
+ KB_SCLN, // Fn3
+ KB_SPC, // Fn4
+ KB_NO, // Fn5
+ KB_NO, // Fn6
+ KB_NO // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------. ,---------------,
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |FN0| = | / | * |
+ * |-----------------------------------------------------------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7 | 8 | 9 | + |
+ * |-----------------------------------------------------' | |---------------|
+ * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | | 4 | 5 | 6 | - |
+ * |-----------------------------------------------------------| |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| / |Shift | | 1 | 2 | 3 | E |
+ * |-----------------------------------------------------------| |-----------| N |
+ * |CAPS|Alt |Gui |` |SPC |BSLS |LFT|RGT|DN|UP| | 0 | . | T |
+ * `-----------------------------------------------------------' |---------------'
+ */
+ KEYMAP(KB_ESC, KB_1, KB_2, KB_3, KB_4, KB_5, KB_6, KB_7, KB_8, KB_9, KB_0, KB_MINS,KB_EQL, KB_BSPC, KB_FN1, KB_PEQL, KB_PSLS, KB_PAST, \
+ KB_TAB, KB_Q, KB_W, KB_E, KB_R, KB_T, KB_Y, KB_U, KB_I, KB_O, KB_P, KB_LBRC,KB_RBRC, KB_P7, KB_P8, KB_P9, KB_PPLS, \
+ KB_LCTL,KB_A, KB_S, KB_D, KB_F, KB_G, KB_H, KB_J, KB_K, KB_L, KB_SCLN, KB_QUOT,KB_ENT, KB_P4, KB_P5, KB_P6, KB_PMNS, \
+ KB_LSFT,KB_Z, KB_X, KB_C, KB_V, KB_B, KB_N, KB_M, KB_COMM,KB_DOT, KB_SLSH, KB_P1, KB_P2, KB_P3, \
+ KB_CAPS,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP, KB_P0, KB_PDOT, KB_PENT),
+
+
+ /* Layer 1: Tenkey use Layer
+ * ,-----------------------------------------------------------. ,---------------,
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NLK| = | / | * |
+ * |-----------------------------------------------------------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |INS| 8 |PGU|V+ |
+ * |-----------------------------------------------------' | |---------------|
+ * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | |DEL|UP |PGD|V- |
+ * |-----------------------------------------------------------| |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| / |Shift | |LFT|DN |RGT| E |
+ * |-----------------------------------------------------------| |-----------| N |
+ * |CAPS|Alt |Gui |` |SPC |BSLS |LFT|RGT|DN|UP| | 0 | . | T |
+ * `-----------------------------------------------------------' `---------------'
+ */
+ KEYMAP(KB_ESC, KB_1, KB_2, KB_3, KB_4, KB_5, KB_6, KB_7, KB_8, KB_9, KB_0, KB_MINS,KB_EQL, KB_BSPC, KB_FN0, KB_PEQL, KB_PSLS, KB_MUTE, \
+ KB_TAB, KB_Q, KB_W, KB_E, KB_R, KB_T, KB_Y, KB_U, KB_I, KB_O, KB_P, KB_LBRC,KB_RBRC, KB_INS, KB_P8, KB_PGUP, KB_VOLU, \
+ KB_LCTL,KB_A, KB_S, KB_D, KB_F, KB_G, KB_H, KB_J, KB_K, KB_L, KB_SCLN, KB_QUOT,KB_ENT, KB_DEL, KB_UP, KB_PGDN, KB_VOLD, \
+ KB_LSFT,KB_Z, KB_X, KB_C, KB_V, KB_B, KB_N, KB_M, KB_COMM,KB_DOT, KB_SLSH, KB_LEFT, KB_DOWN, KB_RIGHT, \
+ KB_CAPS,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP, KB_P0, KB_PDOT, KB_PENT),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+ return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/keyboard/IIgs_Standard/led.c b/keyboard/IIgs_Standard/led.c
new file mode 100644
index 0000000000..f76545f0ba
--- /dev/null
+++ b/keyboard/IIgs_Standard/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/keyboard/IIgs_Standard/matrix.c b/keyboard/IIgs_Standard/matrix.c
new file mode 100644
index 0000000000..c44ac641c9
--- /dev/null
+++ b/keyboard/IIgs_Standard/matrix.c
@@ -0,0 +1,324 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#if (MATRIX_COLS > 16)
+# error "MATRIX_COLS must not exceed 16"
+#endif
+#if (MATRIX_ROWS > 255)
+# error "MATRIX_ROWS must not exceed 255"
+#endif
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+// matrix state buffer(1:on, 0:off)
+#if (MATRIX_COLS <= 8)
+static uint8_t *matrix;
+static uint8_t *matrix_prev;
+static uint8_t _matrix0[MATRIX_ROWS];
+static uint8_t _matrix1[MATRIX_ROWS];
+#else
+static uint16_t *matrix;
+static uint16_t *matrix_prev;
+static uint16_t _matrix0[MATRIX_ROWS];
+static uint16_t _matrix1[MATRIX_ROWS];
+#endif
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static uint8_t read_col(uint8_t row);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ // Input with pull-up(DDR:0, PORT:1)
+ // Column C1 ~ C7 (PortC0-6)
+ // Column C0(Port E1)
+ DDRC &= ~0b01111111;
+ PORTC |= 0b01111111;
+ DDRE &= ~0b00000010;
+ PORTE |= 0b00000010;
+ // modifier B3/4,F4/5,E4 always input
+ DDRB |= 0b00011000;
+ PORTB &= 0b00011000;
+ DDRF |= ~0b00110000;
+ PORTF &= 0b00110000;
+ //DDRB &= ~0b00011000;
+ //PORTB |= 0b00011000;
+ //DDRF &= ~0b00110000;
+ //PORTF |= 0b00110000;
+ //DDRE &= ~0b00010000;
+ //PORTE |= 0b00010000;
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
+ matrix = _matrix0;
+ matrix_prev = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+ if (!debouncing) {
+ uint8_t *tmp = matrix_prev;
+ matrix_prev = matrix;
+ matrix = tmp;
+ }
+
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ unselect_rows();
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ if (matrix[i] != (uint8_t)~read_col(i)) {
+ matrix[i] = (uint8_t)~read_col(i);
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); print("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ }
+ unselect_rows();
+
+ if (debouncing) {
+ debouncing--;
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ if (matrix[i] != matrix_prev[i]) {
+ return true;
+ }
+ }
+ return false;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ if (matrix_has_ghost_in_row(i))
+ return true;
+ }
+#endif
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+inline
+#if (MATRIX_COLS <= 8)
+uint8_t matrix_get_row(uint8_t row)
+#else
+uint16_t matrix_get_row(uint8_t row)
+#endif
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+#if (MATRIX_COLS <= 8)
+ pbin_reverse(matrix_get_row(row));
+#else
+ pbin_reverse16(matrix_get_row(row));
+#endif
+#ifdef MATRIX_HAS_GHOST
+ if (matrix_has_ghost_in_row(row)) {
+ print(" <ghost");
+ }
+#endif
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (MATRIX_COLS <= 8)
+ count += bitpop(matrix[i]);
+#else
+ count += bitpop16(matrix[i]);
+#endif
+ }
+ return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+ // no ghost exists in case less than 2 keys on
+ if (((matrix[row] - 1) & matrix[row]) == 0)
+ return false;
+
+ // ghost exists in case same state as other row
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+ return true;
+ }
+ return false;
+}
+#endif
+
+inline
+static uint8_t read_col(uint8_t row)
+{
+ // For normal : Column C1 ~ C7 (PortC0-6), C0(Port E1)
+ // For modifier : B3(CNTRL)/4(SHIFT),F4(CMD/GUI)/5(OPTION,ALT)
+ // Modifier would be copied to report->mods except E4(CAPSLOCK)
+ uint8_t tmp;
+ if ( row == 10 ) {
+ tmp = 0xF0;
+ tmp |= (PINB >> 3 ) & 0b00000011; // LEFT CTRL is 0bit in modifier (HID Spec)
+ // LEFT SHIFT is 1bit in modifier (HID Spec)
+ tmp |= (PINF >> 3 ) & 0b00000100; // LEFT ALT is 2bit in modifier (HID Spec)
+ tmp |= (PINF >> 1 ) & 0b00001000; // LEFT GUI is 3bit in modifier (HID Spec)
+ //tmp |= (PINE << 1 ) & 0b00010000; // Caps Lock(Should not be in modifier
+ } else {
+ tmp = 0x00;
+ tmp = (PINE >> 1)&0b00000001;
+ tmp |= PINC << 1 ;
+ }
+ return tmp;
+}
+
+inline
+static void unselect_rows(void)
+{
+ // Hi-Z(DDR:0, PORT:0) to unselect
+ // DDR : 1, output 0, input
+ DDRB &= ~0b00000011; // PB: 1,0
+ PORTB &= ~0b00000011;
+ DDRD &= ~0b00010000; // PD: 4
+ PORTD &= ~0b00010000;
+ DDRE &= ~0b11000000; // PE: 7,6
+ PORTE &= ~0b11000000;
+ DDRF &= ~0b11000111; // PF: 7,6,2,1,0
+ PORTF &= ~0b11000111;
+ // to unselect virtual row(modifier), set port to output with low
+ DDRB |= 0b00011000; // PB: 3,4 for modifier(row10)
+ PORTB &= ~0b00011000;
+ DDRF |= 0b00110000; // PF: 4,5 for modifier
+ PORTF &= ~0b00110000;
+}
+
+inline
+static void select_row(uint8_t row)
+{
+ // Output low(DDR:1, PORT:0) to select
+ // with row enable, column could send low to AVR when pressed
+ // row: 0 1 2 3 4 5 6 7 8 9
+ // pin: PB1, PB0, PE7, PE6, PD4, PF2, PF0, PF1, PF6 PF7
+ switch (row) {
+ case 0:
+ DDRB |= (1<<1);
+ PORTB &= ~(1<<1);
+ break;
+ case 1:
+ DDRB |= (1<<0);
+ PORTB &= ~(1<<0);
+ break;
+ case 2:
+ DDRE |= (1<<7);
+ PORTE &= ~(1<<7);
+ break;
+ case 3:
+ DDRE |= (1<<6);
+ PORTE &= ~(1<<6);
+ break;
+ case 4:
+ DDRD |= (1<<4);
+ PORTD &= ~(1<<4);
+ break;
+ case 5:
+ DDRF |= (1<<2);
+ PORTF &= ~(1<<2);
+ break;
+ case 6:
+ DDRF |= (1<<0);
+ PORTF &= ~(1<<0);
+ break;
+ case 7:
+ DDRF |= (1<<1);
+ PORTF &= ~(1<<1);
+ break;
+ case 8:
+ DDRF |= (1<<6);
+ PORTF &= ~(1<<6);
+ break;
+ case 9:
+ DDRF |= (1<<7);
+ PORTF &= ~(1<<7);
+ break;
+ case 10:
+ // modifier has no row enable
+ // to select virtual row, set port as input
+ DDRB &= ~0b00011000;
+ PORTB |= 0b00011000;
+ DDRF &= ~0b00110000;
+ PORTF |= 0b00110000;
+ break;
+
+ }
+}