summaryrefslogtreecommitdiff
path: root/keyboard
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard')
-rw-r--r--keyboard/IIgs/Makefile10
-rw-r--r--keyboard/alps64/Makefile134
-rw-r--r--keyboard/alps64/config.h70
-rw-r--r--keyboard/alps64/keymap_common.c30
-rw-r--r--keyboard/alps64/keymap_common.h70
-rw-r--r--keyboard/alps64/keymap_hasu.c151
-rw-r--r--keyboard/alps64/keymap_plain.c12
-rw-r--r--keyboard/alps64/led.c34
-rw-r--r--keyboard/alps64/matrix.c200
-rw-r--r--keyboard/gh60/Makefile10
-rw-r--r--keyboard/gh60/Makefile.pjrc10
-rw-r--r--keyboard/ghost_squid/Makefile.lufa10
-rw-r--r--keyboard/hbkb/Makefile.lufa10
-rw-r--r--keyboard/hhkb/Makefile14
-rw-r--r--keyboard/hhkb/Makefile.pjrc10
-rw-r--r--keyboard/hhkb/Makefile.rn4212
-rw-r--r--keyboard/hhkb/doc/HHKB.txt21
-rw-r--r--keyboard/hhkb/doc/HHKB_keycodes.txt69
-rw-r--r--keyboard/hhkb/keymap_hasu.c4
-rw-r--r--keyboard/hhkb/keymap_hhkb.c41
-rw-r--r--keyboard/hhkb/matrix.c6
-rw-r--r--keyboard/hhkb/not_supported/Makefile.iwrap12
-rw-r--r--keyboard/hhkb/not_supported/Makefile.vusb10
-rw-r--r--keyboard/hid_liber/Makefile.lufa10
-rw-r--r--keyboard/hid_liber/Makefile.pjrc10
-rw-r--r--keyboard/infinity/Makefile4
-rw-r--r--keyboard/infinity/mbed-infinity.mk34
-rw-r--r--keyboard/infinity/mbed-infinity/README44
-rw-r--r--keyboard/infinity/mbed-infinity/startup_MK20D5.s259
-rw-r--r--keyboard/infinity/tool/README82
-rw-r--r--keyboard/infinity/tool/k20dx32_flash.cfg17
-rw-r--r--keyboard/kitten_paw/Makefile.lufa10
-rw-r--r--keyboard/kmac/Makefile.lufa10
-rw-r--r--keyboard/kmac/Makefile.pjrc10
-rw-r--r--keyboard/lightpad/Makefile.lufa10
-rw-r--r--keyboard/lightsaber/Makefile.lufa10
-rw-r--r--keyboard/lightsaber/Makefile.pjrc10
-rw-r--r--keyboard/macway/Makefile.lufa10
-rw-r--r--keyboard/macway/Makefile.pjrc10
-rw-r--r--keyboard/mbed_onekey/Makefile2
-rw-r--r--keyboard/nerd/Makefile10
-rw-r--r--keyboard/onekey/Makefile12
-rw-r--r--keyboard/onekey/Makefile.pjrc12
-rw-r--r--keyboard/onekey/Makefile.vusb88
-rw-r--r--keyboard/onekey/usbconfig.h377
-rw-r--r--keyboard/phantom/Makefile.lufa10
-rw-r--r--keyboard/phantom/Makefile.pjrc10
-rw-r--r--keyboard/planck/Makefile2
-rw-r--r--keyboard/planck/__avr_gdbinit6
49 files changed, 1846 insertions, 173 deletions
diff --git a/keyboard/IIgs/Makefile b/keyboard/IIgs/Makefile
index c18e9720c7..3bf380e64b 100644
--- a/keyboard/IIgs/Makefile
+++ b/keyboard/IIgs/Makefile
@@ -42,7 +42,7 @@
TARGET = IIgs_Standard
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -88,8 +88,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/alps64/Makefile b/keyboard/alps64/Makefile
new file mode 100644
index 0000000000..e90dcedb67
--- /dev/null
+++ b/keyboard/alps64/Makefile
@@ -0,0 +1,134 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = alps64
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/alps64/config.h b/keyboard/alps64/config.h
new file mode 100644
index 0000000000..824d3e8302
--- /dev/null
+++ b/keyboard/alps64/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6464
+#define DEVICE_VER 0x0001
+#define MANUFACTURER TMK
+#define PRODUCT Alps64
+#define DESCRIPTION TMK keyboard firmware for Alps64
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/alps64/keymap_common.c b/keyboard/alps64/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/alps64/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/alps64/keymap_common.h b/keyboard/alps64/keymap_common.h
new file mode 100644
index 0000000000..957db57922
--- /dev/null
+++ b/keyboard/alps64/keymap_common.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* Alps64 keymap definition macro */
+#define KEYMAP( \
+ K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+ K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+ K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+ K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+ K30, K40, K50, K60, K70, K00, K10, K20 \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
+ { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+ { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
+ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \
+}
+
+/* AEK US */
+#define KEYMAP_AEK( \
+ K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \
+ K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+ K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+ K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \
+ K30, K40, K50, K60, K00, K10, K20 \
+) KEYMAP( \
+ K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, NUHS,K27, \
+ K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+ K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+ K31, NUBS,K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, ESC, \
+ K30, K40, K50, K60, APP, K00, K10, K20 \
+)
+
+#endif
diff --git a/keyboard/alps64/keymap_hasu.c b/keyboard/alps64/keymap_hasu.c
new file mode 100644
index 0000000000..d297d72fea
--- /dev/null
+++ b/keyboard/alps64/keymap_hasu.c
@@ -0,0 +1,151 @@
+#include "keymap_common.h"
+
+/*
+ * Hasu
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \ |
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Bspc |
+ * |-----------------------------------------------------------|
+ * |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|FN1 |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ [0] = KEYMAP_AEK( \
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
+ LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN1, \
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT, \
+ LCTL,LGUI,LALT, FN4, RALT,FN5, FN0),
+
+ /* HHKB mode[HHKB Fn]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` |
+ * |-----------------------------------------------------------|
+ * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Del |
+ * |-----------------------------------------------------------|
+ * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | | +| -|End|PgD|Dow|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ [1] = KEYMAP_AEK( \
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \
+ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, DEL, \
+ LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS, \
+ LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT, \
+ LCTL,LGUI,LALT, TRNS, RALT,RGUI,TRNS),
+
+ /* Vi mode[Slash]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Del |
+ * |-----------------------------------------------------------|
+ * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
+ * |-----------------------------------------------------------|
+ * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ [2] = KEYMAP_AEK( \
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \
+ TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, DEL, \
+ LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
+ LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT, \
+ LCTL,LGUI,LALT, SPC, RALT,RGUI,RCTL),
+
+ /* Mouse mode(IJKL)[Semicolon]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+ * |-----------------------------------------------------------|
+ * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl |
+ * `-----------------------------------------------------------'
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+ */
+ [3] = KEYMAP_AEK( \
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \
+ FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+ LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT, \
+ LCTL,LGUI,LALT, BTN1, TRNS,TRNS,TRNS),
+
+ /* Layer 4: Mouse mode(IJKL)[Space]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+ * |-----------------------------------------------------------|
+ * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl |
+ * `-----------------------------------------------------------'
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+ */
+ [4] = KEYMAP_AEK( \
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \
+ FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+ LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT, \
+ LCTL,LGUI,LALT, TRNS, TRNS,TRNS,TRNS),
+};
+
+
+/* id for user defined function/macro */
+enum function_id {
+ NONE,
+};
+
+enum macro_id {
+ ALT_TAB,
+};
+
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // HHKB layer
+ [1] = ACTION_LAYER_TAP_KEY(1, KC_ENTER), // HHKB layer
+ [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash*
+ [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon*
+ [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space
+ [5] = ACTION_LAYER_MOMENTARY(3), // Mousekey layer(IJKL)
+ [6] = ACTION_LAYER_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter
+ [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift
+ [8] = ACTION_MACRO(ALT_TAB), // Application switching
+ [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
+ [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
+};
+
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ switch (id) {
+ case ALT_TAB:
+ return (record->event.pressed ?
+ MACRO( D(LALT), D(TAB), END ) :
+ MACRO( U(TAB), END ));
+ }
+ return MACRO_NONE;
+}
diff --git a/keyboard/alps64/keymap_plain.c b/keyboard/alps64/keymap_plain.c
new file mode 100644
index 0000000000..a54899196a
--- /dev/null
+++ b/keyboard/alps64/keymap_plain.c
@@ -0,0 +1,12 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: qwerty */
+ KEYMAP( \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS, BSPC, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
+ LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,ESC, \
+ LCTL,LGUI,LALT, SPC, APP, RALT,RGUI,RCTL),
+};
+const uint16_t PROGMEM fn_actions[] = {};
diff --git a/keyboard/alps64/led.c b/keyboard/alps64/led.c
new file mode 100644
index 0000000000..d20c51aabe
--- /dev/null
+++ b/keyboard/alps64/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // output high
+ DDRC |= (1<<5);
+ PORTC |= (1<<5);
+ } else {
+ // Hi-Z
+ DDRC &= ~(1<<5);
+ PORTC &= ~(1<<5);
+ }
+}
diff --git a/keyboard/alps64/matrix.c b/keyboard/alps64/matrix.c
new file mode 100644
index 0000000000..5638d7f69d
--- /dev/null
+++ b/keyboard/alps64/matrix.c
@@ -0,0 +1,200 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+#define LED_ON() do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0)
+#define LED_OFF() do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0)
+#define LED_TGL() do { DDRC |= (1<<5); PINC |= (1<<5); } while (0)
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ //debug
+ debug_matrix = true;
+ LED_ON();
+ _delay_ms(500);
+ LED_OFF();
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+/* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7
+ * pin: B0 B1 B2 B3 B4 B5 B6 B7
+ */
+static void init_cols(void)
+{
+ // Input with pull-up(DDR:0, PORT:1)
+ DDRB &= ~0b11111111;
+ PORTB |= 0b11111111;
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+ // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1)
+ return ~PINB;
+}
+
+/* Row pin configuration
+ * row: 0 1 2 3 4 5 6 7
+ * pin: D0 D1 D2 D3 D4 D5 D6 C2
+ */
+static void unselect_rows(void)
+{
+ // Hi-Z(DDR:0, PORT:0) to unselect
+ DDRD &= ~0b01111111;
+ PORTD &= ~0b01111111;
+ DDRC &= ~0b00000100;
+ PORTC &= ~0b00000100;
+}
+
+static void select_row(uint8_t row)
+{
+ // Output low(DDR:1, PORT:0) to select
+ switch (row) {
+ case 0:
+ DDRD |= (1<<0);
+ PORTD &= ~(1<<0);
+ break;
+ case 1:
+ DDRD |= (1<<1);
+ PORTD &= ~(1<<1);
+ break;
+ case 2:
+ DDRD |= (1<<2);
+ PORTD &= ~(1<<2);
+ break;
+ case 3:
+ DDRD |= (1<<3);
+ PORTD &= ~(1<<3);
+ break;
+ case 4:
+ DDRD |= (1<<4);
+ PORTD &= ~(1<<4);
+ break;
+ case 5:
+ DDRD |= (1<<5);
+ PORTD &= ~(1<<5);
+ break;
+ case 6:
+ DDRD |= (1<<6);
+ PORTD &= ~(1<<6);
+ break;
+ case 7:
+ DDRC |= (1<<2);
+ PORTC &= ~(1<<2);
+ break;
+ }
+}
diff --git a/keyboard/gh60/Makefile b/keyboard/gh60/Makefile
index b48ee3fde6..6b0f1a0e8d 100644
--- a/keyboard/gh60/Makefile
+++ b/keyboard/gh60/Makefile
@@ -42,7 +42,7 @@
TARGET = gh60_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -128,8 +128,8 @@ NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/gh60/Makefile.pjrc b/keyboard/gh60/Makefile.pjrc
index 9655ff65a9..11bd3b7840 100644
--- a/keyboard/gh60/Makefile.pjrc
+++ b/keyboard/gh60/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = gh60_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -97,11 +97,11 @@ NKRO_ENABLE = yes # USB Nkey Rollover(+500)
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
plain: OPT_DEFS += -DKEYMAP_PLAIN
plain: all
diff --git a/keyboard/ghost_squid/Makefile.lufa b/keyboard/ghost_squid/Makefile.lufa
index 61893893a4..54adb1e3d8 100644
--- a/keyboard/ghost_squid/Makefile.lufa
+++ b/keyboard/ghost_squid/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = ghostsquid_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -110,8 +110,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hbkb/Makefile.lufa b/keyboard/hbkb/Makefile.lufa
index 0d103c8766..322f219d69 100644
--- a/keyboard/hbkb/Makefile.lufa
+++ b/keyboard/hbkb/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = hbkb_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -113,8 +113,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile b/keyboard/hhkb/Makefile
index dc5c06a948..5a179bd24d 100644
--- a/keyboard/hhkb/Makefile
+++ b/keyboard/hhkb/Makefile
@@ -42,7 +42,7 @@
TARGET = hhkb_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -120,6 +120,10 @@ NKRO_ENABLE = yes # USB Nkey Rollover
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
#HHKB_JP = yes # HHKB JP support
+#OPT_DEFS += -DNO_ACTION_TAPPING
+#OPT_DEFS += -DNO_ACTION_LAYER
+#OPT_DEFS += -DNO_ACTION_MACRO
+
#
# Keymap file
@@ -142,11 +146,11 @@ endif
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
debug-on: all
diff --git a/keyboard/hhkb/Makefile.pjrc b/keyboard/hhkb/Makefile.pjrc
index b6ce9c7504..7d0f8c3a9c 100644
--- a/keyboard/hhkb/Makefile.pjrc
+++ b/keyboard/hhkb/Makefile.pjrc
@@ -7,7 +7,7 @@
TARGET = hhkb_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -61,8 +61,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.rn42 b/keyboard/hhkb/Makefile.rn42
index b1eacd070f..cbb2b744c9 100644
--- a/keyboard/hhkb/Makefile.rn42
+++ b/keyboard/hhkb/Makefile.rn42
@@ -42,7 +42,7 @@
TARGET = hhkb_rn42
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -139,13 +139,13 @@ endif
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
include rn42.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
debug-on: all
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt
index 98397b8477..3d08ceb0af 100644
--- a/keyboard/hhkb/doc/HHKB.txt
+++ b/keyboard/hhkb/doc/HHKB.txt
@@ -31,27 +31,28 @@ Two PCBs are connected by 15 lines(13 in case of Pro2).
Vcc and GND use 3(2) lines each, other lines are for keyboard signaling.
HHKB connector lines:
- JP Pro2 Pro Function Description Teensy++ pins
+ JP Pro2 Pro Function Description TMK pin usage
--------------------------------------------------------------------------------------------
1 Vcc(5V) 5V
1 1 2 Vcc(5V) 5V
2 2 3 Vcc(5V) 5V
- 3 3 4 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
- 4 4 5 TP1684 KEY_PREV: make threshold PE7 output
+ 3 3 4 TP1684 ~KEY: Low(0) when key is pressed PD7 input(with pullup)
+ 4 4 5 TP1684 HYS: High(1) when key is pressed PB7 output
5 5 6 HC4051 A(bit0)\ PB0 output
6 6 7 HC4051 B(bit1) > select row 0-7 PB1 output
7 7 8 HC4051 C(bit2)/ PB2 output
8 8 9 LS145 A(bit0)\ PB3 output
9 9 10 LS145 B(bit1) > select column 0-7 PB4 output
10 10 11 LS145 C(bit2)/ PB5 output
- 11 11 12 LS145 D(enable) Low(0) enables selected column PB6 output
+ 11 11 12 LS145 ~D(enable) Low(0) enables selected column PB6 output
12 12 13 GND GND
13 13 14 GND GND
15 GND
- 14 HC4051(Z2) ~Enable of Z2 row0-7
- 15 HC4051(Z3) ~Enable of Z3 row8-15
+ 14 HC4051(Z2) ~Enable of Z2 row0-7 PC6
+ 15 HC4051(Z3) ~Enable of Z3 row8-15 PC7
- NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
+ NOTE: Probably HYS changes threshold for upstroke and makes hysteresis in the result.
+ NOTE: HYS should be given High(1) when previous KEY state is Low(0).
NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK.
NOTE: JP has two HC4051(Z2,Z3) and line 5, 6 and 7 are connected to both of them.
@@ -112,7 +113,7 @@ Matrix diagram:
| <-+ | <6-------|-|-|-|-|-|-|-|--|R|-+
| 1 4 | | | <7-------|-|-|-|-|-|-|-|--|R|-+
+---V---^-+ | +-^-^-^--+ 0 1 2 3 4 5 6 7 33K*8
- KEY PREV | A B C +-----------------+
+ KEY HYS | A B C +-----------------+
| | +-^----+ | | | | LS145 |
Vcc | | |BU9831| | | | +-^--^--^--^------+
--- | | +------+ | | | A B C D +-------+
@@ -138,7 +139,7 @@ Matrix diagram:
| | +----> <6-----------|-|-|-|-|----|R|-+
| | | | | A B C <7-----------|-|-|-|-|----|R|-+
+---V---^-+ | | +-^-^-^--+ | | | | | |
- KEY PREV | | | | | | | | | | |
+ KEY HYS | | | | | | | | | | |
| | | | +--------+ | | | | | |
| | | | | HC4051 <8-----------|-|-|-|-|----|R|-+
| | | | | Z3 <9-----------|-|-|-|-|----|R|-+
@@ -192,7 +193,7 @@ Signals charts
0123456701234567 selected column
3) Wait 5us after column select, then set prev, strobe colD to spit out key status and read it.
- prev _~~~~_____ 20us if previous key state is low
+ hys _~~~~_____ 20us if previous key state is low
colD ~~~__~~~~~ 10us strobe
key ~~~____~~~ 22us indicates current state of the key
diff --git a/keyboard/hhkb/doc/HHKB_keycodes.txt b/keyboard/hhkb/doc/HHKB_keycodes.txt
new file mode 100644
index 0000000000..9ec85901e0
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_keycodes.txt
@@ -0,0 +1,69 @@
+HHKB keycodes
+=============
+2015/10/03
+Looked into unclear keycodes(usages) of Fn-chording-key on HHKB.
+Followings are usages of Keyboard/Keypad Page(0x07) that HHKB spits out when Fn key is down.
+
+## HHK mode(Off-Off)
+ Key Usage
+ ------------------------
+ ⌘ / ◇ 0x78 Stop
+
+## Lite Ext. mode(On-Off)
+
+
+## Mac mode(Off-On)
+ Key Usage
+ ------------------------
+ Esc 0x66 Power
+ A 0x81 Volume Down
+ S 0x80 Volume Up
+ D 0x7F Mute
+ F 0x6F F20
+ Delete 0x53 Num Lock and Clear
+
+
+## Secret mode(On-On)
+ Key Usage
+ ------------------------
+ Esc 0x66 Power
+ Q 0x78 Stop
+ W 0x7E Find
+ E 0x74 Execute
+ R 0x77 Select
+ T 0x76 Menu
+ Y 0x75 Help
+ Z 0x7A Undo
+ X 0x7B Cut
+ C 0x7C Copy
+ V 0x7D Paste
+ B 0x79 Again
+
+
+## Matrix Key-Mode
+
+
+ Mode
+ -------------------------------
+ Key HHK Lite Mac Secret Desc
+ ---------------------------------------------------------------------------------------
+ ⌘ / ◇ 0x78 - - - Stop
+ Esc - - 0x66 0x66 Power
+ A - - 0x81 - Volume Down
+ S - - 0x80 - Volume Up
+ D - - 0x7F - Mute
+ F - - 0x6F - F20
+ Delete 0x2A 0x2A 0x53 0x2A Num Lock and Clear(0x53)/Backspace(0x2A)
+ Q - - - 0x78 Stop
+ W - - - 0x7E Find
+ E - - - 0x74 Execute
+ R - - - 0x77 Select
+ T - - - 0x76 Menu
+ Y - - - 0x75 Help
+ Z - - - 0x7A Undo
+ X - - - 0x7B Cut
+ C - - - 0x7C Copy
+ V - - - 0x7D Paste
+ B - - - 0x79 Again
+
+EOF
diff --git a/keyboard/hhkb/keymap_hasu.c b/keyboard/hhkb/keymap_hasu.c
index 433f9cb270..a5602ded31 100644
--- a/keyboard/hhkb/keymap_hasu.c
+++ b/keyboard/hhkb/keymap_hasu.c
@@ -85,7 +85,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
*/
[3] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+ FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,FN9, FN10,FN8, \
LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
LGUI,LALT, BTN1, TRNS,TRNS),
@@ -106,7 +106,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
*/
[4] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+ FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,BTN4,BTN5,FN8, \
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
LGUI,LALT, TRNS, TRNS,TRNS),
diff --git a/keyboard/hhkb/keymap_hhkb.c b/keyboard/hhkb/keymap_hhkb.c
index 1fc016f8e2..86ad0f5eee 100644
--- a/keyboard/hhkb/keymap_hhkb.c
+++ b/keyboard/hhkb/keymap_hhkb.c
@@ -1,4 +1,4 @@
-/*
+/*
* HHKB Layout
*/
#include "keymap_common.h"
@@ -40,7 +40,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* `-----------------------------------------------------------'
* | | | | | |
* `-------------------------------------------'
- */
+ */
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC, \
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT, \
@@ -55,8 +55,41 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
*/
#ifdef KEYMAP_SECTION_ENABLE
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
+ [0] = ACTION_LAYER_MOMENTARY(1),
+ [1] = ACTION_LAYER_MOMENTARY(2),
+ [2] = ACTION_LAYER_MOMENTARY(3),
+ [3] = ACTION_LAYER_MOMENTARY(4),
+ [4] = ACTION_LAYER_MOMENTARY(5),
+ [5] = ACTION_LAYER_MOMENTARY(6),
+ [6] = ACTION_LAYER_MOMENTARY(7),
+ [7] = ACTION_LAYER_TOGGLE(1),
+ [8] = ACTION_LAYER_TOGGLE(2),
+ [9] = ACTION_LAYER_TOGGLE(3),
+ [10] = ACTION_LAYER_TAP_TOGGLE(1),
+ [11] = ACTION_LAYER_TAP_TOGGLE(2),
+ [12] = ACTION_LAYER_TAP_TOGGLE(3),
+ [13] = ACTION_LAYER_TAP_KEY(1, KC_A),
+ [14] = ACTION_LAYER_TAP_KEY(2, KC_F),
+ [15] = ACTION_LAYER_TAP_KEY(3, KC_J),
+ [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
+ [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
+ [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
+ [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
+ [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
+ [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
+ [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
+ [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
+ [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+ [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
+ [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
+ [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
+ [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
+ [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
+ [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ESC),
+ [31] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_BSPACE),
+};
#else
const uint16_t fn_actions[] PROGMEM = {
-#endif
- [0] = ACTION_LAYER_MOMENTARY(1),
+ [0] = ACTION_LAYER_MOMENTARY(1),
};
+#endif
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index fb96997944..14fae0b82c 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -132,7 +132,13 @@ uint8_t matrix_scan(void)
// NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
// This takes 25us or more to make sure KEY_STATE returns to idle state.
+#ifdef HHKB_JP
+ // Looks like JP needs faster scan due to its twice larger matrix
+ // or it can drop keys in fast key typing
+ _delay_us(30);
+#else
_delay_us(75);
+#endif
}
if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
}
diff --git a/keyboard/hhkb/not_supported/Makefile.iwrap b/keyboard/hhkb/not_supported/Makefile.iwrap
index 2d9d82c481..1614c21d75 100644
--- a/keyboard/hhkb/not_supported/Makefile.iwrap
+++ b/keyboard/hhkb/not_supported/Makefile.iwrap
@@ -7,7 +7,7 @@
TARGET = hhkb_iwrap
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -94,10 +94,10 @@ PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/iwrap.mk
+include $(TMK_DIR)/protocol/iwrap.mk
# TODO: to be selectable: V-USB, LUFA or PJRC
-#include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+#include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hhkb/not_supported/Makefile.vusb b/keyboard/hhkb/not_supported/Makefile.vusb
index 4343b210d9..1f8d84684b 100644
--- a/keyboard/hhkb/not_supported/Makefile.vusb
+++ b/keyboard/hhkb/not_supported/Makefile.vusb
@@ -7,7 +7,7 @@
TARGET = hhkb_vusb
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -87,11 +87,11 @@ PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
debug-on: EXTRAFLAGS += -DDEBUG
debug-on: all
diff --git a/keyboard/hid_liber/Makefile.lufa b/keyboard/hid_liber/Makefile.lufa
index c99d1a32f6..5fc4156a9e 100644
--- a/keyboard/hid_liber/Makefile.lufa
+++ b/keyboard/hid_liber/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = hid_liber_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -119,11 +119,11 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
ansi: OPT_DEFS += -DLAYOUT_ANSI
ansi: all
diff --git a/keyboard/hid_liber/Makefile.pjrc b/keyboard/hid_liber/Makefile.pjrc
index 42fb6895e1..326bbe86f5 100644
--- a/keyboard/hid_liber/Makefile.pjrc
+++ b/keyboard/hid_liber/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = hid_liber_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -92,11 +92,11 @@ NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
ansi: OPT_DEFS += -DLAYOUT_ANSI
ansi: all
diff --git a/keyboard/infinity/Makefile b/keyboard/infinity/Makefile
index e33c239afb..e740b6adbc 100644
--- a/keyboard/infinity/Makefile
+++ b/keyboard/infinity/Makefile
@@ -1,7 +1,7 @@
PROJECT = infinity
-TMK_DIR = ../..
-MBED_DIR = $(TMK_DIR)/mbed-sdk
+TMK_DIR = ../../tmk_core
+MBED_DIR = $(TMK_DIR)/tool/mbed/mbed-sdk
#VPATH += $(MBED_DIR):$(TMK_DIR)
vpath %.s .:$(MBED_DIR):$(TMK_DIR)
diff --git a/keyboard/infinity/mbed-infinity.mk b/keyboard/infinity/mbed-infinity.mk
index f5fd2c9975..2c8d2e4372 100644
--- a/keyboard/infinity/mbed-infinity.mk
+++ b/keyboard/infinity/mbed-infinity.mk
@@ -19,29 +19,31 @@ OBJECTS += \
$(OBJDIR)/mbed-infinity/cmsis_nvic.o \
$(OBJDIR)/mbed-infinity/system_MK20D5.o \
$(OBJDIR)/mbed-infinity/USBHAL_KL25Z.o \
- $(OBJDIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/analogin_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/gpio_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/gpio_irq_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/i2c_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/pinmap.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/port_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/pwmout_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/rtc_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/serial_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/sleep.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/spi_api.o \
- $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/us_ticker.o
+ $(OBJDIR)/mbed-infinity/startup_MK20D5.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/analogin_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/gpio_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/gpio_irq_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/i2c_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/pinmap.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/port_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/pwmout_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/rtc_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/serial_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/sleep.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/spi_api.o \
+ $(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/us_ticker.o
INCLUDE_PATHS += \
-Imbed \
-I$(MBED_DIR)/libraries/mbed/targets \
-I$(MBED_DIR)/libraries/mbed/targets/cmsis \
-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale \
- -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M \
- -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM \
+ -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20XX \
+ -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M \
+ -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/TOOLCHAIN_GCC_ARM \
-I$(MBED_DIR)/libraries/mbed/targets/hal \
-I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale \
- -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M
+ -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX \
+ -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M
LINKER_SCRIPT = mbed-infinity/infinity.ld
diff --git a/keyboard/infinity/mbed-infinity/README b/keyboard/infinity/mbed-infinity/README
index b0d226f793..43051c9003 100644
--- a/keyboard/infinity/mbed-infinity/README
+++ b/keyboard/infinity/mbed-infinity/README
@@ -37,3 +37,47 @@ Clock enable:
SIM_SCGC4[USBOTG] = 1
+
+Infinity bootloader change
+==========================
+After @2c7542e(2015/01) Infinity bootloader doesn't disable watchdog timer and keyboard firmware has to do it itself. mbed disables watchdog in startup sequence but unfortunately timer is timed out bofore that.
+
+We have to do that in earlier phase of mbed startup sequence.
+
+
+mbed starup sequence files:
+mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_M20D5.s
+mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/system_MK20D5.c
+
+Infinity booloader change commit:
+https://github.com/kiibohd/controller/commit/2c7542e2e7f0b8a99edf563dc53164fe1a439483
+
+discussion:
+https://geekhack.org/index.php?topic=41989.msg1686616#msg1686616
+
+
+WORKAROUND
+----------
+Call SystemInit early in Reset_Handler.
+
+$ diff -u ../../mbed-sdk/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.s mbed-infinity
+--- ../../mbed-sdk/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.s 2015-03-22 10:33:22.779866000 +0900
++++ mbed-infinity/startup_MK20D5.s 2015-03-22 10:32:56.483866000 +0900
+@@ -147,6 +147,8 @@
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
++ ldr r0, =SystemInit
++ blx r0
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+@@ -161,8 +163,6 @@
+
+ .Lflash_to_ram_loop_end:
+
+- ldr r0, =SystemInit
+- blx r0
+ ldr r0, =_start
+ bx r0
+ .pool
diff --git a/keyboard/infinity/mbed-infinity/startup_MK20D5.s b/keyboard/infinity/mbed-infinity/startup_MK20D5.s
new file mode 100644
index 0000000000..7a8d7ba45a
--- /dev/null
+++ b/keyboard/infinity/mbed-infinity/startup_MK20D5.s
@@ -0,0 +1,259 @@
+/* File: startup_MK20D5.s
+ * Purpose: startup file for Cortex-M4 devices. Should use with
+ * GCC for ARM Embedded Processors
+ * Version: V1.3
+ * Date: 08 Feb 2012
+ *
+ * Copyright (c) 2012, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of the ARM Limited nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+#ifdef __STACK_SIZE
+ .equ Stack_Size, __STACK_SIZE
+#else
+ .equ Stack_Size, 0x400
+#endif
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0xC00
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long MemManage_Handler /* MPU Fault Handler */
+ .long BusFault_Handler /* Bus Fault Handler */
+ .long UsageFault_Handler /* Usage Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long DebugMon_Handler /* Debug Monitor Handler */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External interrupts */
+ .long DMA0_IRQHandler /* 0: Watchdog Timer */
+ .long DMA1_IRQHandler /* 1: Real Time Clock */
+ .long DMA2_IRQHandler /* 2: Timer0 / Timer1 */
+ .long DMA3_IRQHandler /* 3: Timer2 / Timer3 */
+ .long DMA_Error_IRQHandler /* 4: MCIa */
+ .long 0 /* 5: MCIb */
+ .long FTFL_IRQHandler /* 6: UART0 - DUT FPGA */
+ .long Read_Collision_IRQHandler /* 7: UART1 - DUT FPGA */
+ .long LVD_LVW_IRQHandler /* 8: UART2 - DUT FPGA */
+ .long LLW_IRQHandler /* 9: UART4 - not connected */
+ .long Watchdog_IRQHandler /* 10: AACI / AC97 */
+ .long I2C0_IRQHandler /* 11: CLCD Combined Interrupt */
+ .long SPI0_IRQHandler /* 12: Ethernet */
+ .long I2S0_Tx_IRQHandler /* 13: USB Device */
+ .long I2S0_Rx_IRQHandler /* 14: USB Host Controller */
+ .long UART0_LON_IRQHandler /* 15: Character LCD */
+ .long UART0_RX_TX_IRQHandler /* 16: Flexray */
+ .long UART0_ERR_IRQHandler /* 17: CAN */
+ .long UART1_RX_TX_IRQHandler /* 18: LIN */
+ .long UART1_ERR_IRQHandler /* 19: I2C ADC/DAC */
+ .long UART2_RX_TX_IRQHandler /* 20: Reserved */
+ .long UART2_ERR_IRQHandler /* 21: Reserved */
+ .long ADC0_IRQHandler /* 22: Reserved */
+ .long CMP0_IRQHandler /* 23: Reserved */
+ .long CMP1_IRQHandler /* 24: Reserved */
+ .long FTM0_IRQHandler /* 25: Reserved */
+ .long FTM1_IRQHandler /* 26: Reserved */
+ .long CMT_IRQHandler /* 27: Reserved */
+ .long RTC_IRQHandler /* 28: Reserved - CPU FPGA CLCD */
+ .long RTC_Seconds_IRQHandler /* 29: Reserved - CPU FPGA */
+ .long PIT0_IRQHandler /* 30: UART3 - CPU FPGA */
+ .long PIT1_IRQHandler /* 31: SPI Touchscreen - CPU FPGA */
+ .long PIT2_IRQHandler
+ .long PIT3_IRQHandler
+ .long PDB0_IRQHandler
+ .long USB0_IRQHandler
+ .long USBDCD_IRQHandler
+ .long TSI0_IRQHandler
+ .long MCG_IRQHandler
+ .long LPTimer_IRQHandler
+ .long PORTA_IRQHandler
+ .long PORTB_IRQHandler
+ .long PORTC_IRQHandler
+ .long PORTD_IRQHandler
+ .long PORTE_IRQHandler
+ .long SWI_IRQHandler
+ .size __isr_vector, . - __isr_vector
+
+ .section .text.Reset_Handler
+ .thumb
+ .thumb_func
+ .align 2
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+ ldr r0, =SystemInit
+ blx r0
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+.Lflash_to_ram_loop:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .Lflash_to_ram_loop
+
+.Lflash_to_ram_loop_end:
+
+ ldr r0, =_start
+ bx r0
+ .pool
+ .size Reset_Handler, . - Reset_Handler
+
+ .text
+/* Macro to define default handlers. Default handler
+ * will be weak symbol and just dead loops. They can be
+ * overwritten by other handlers */
+ .macro def_default_handler handler_name
+ .align 1
+ .thumb_func
+ .weak \handler_name
+ .type \handler_name, %function
+\handler_name :
+ b .
+ .size \handler_name, . - \handler_name
+ .endm
+
+ def_default_handler NMI_Handler
+ def_default_handler HardFault_Handler
+ def_default_handler MemManage_Handler
+ def_default_handler BusFault_Handler
+ def_default_handler UsageFault_Handler
+ def_default_handler SVC_Handler
+ def_default_handler DebugMon_Handler
+ def_default_handler PendSV_Handler
+ def_default_handler SysTick_Handler
+ def_default_handler Default_Handler
+
+ .macro def_irq_default_handler handler_name
+ .weak \handler_name
+ .set \handler_name, Default_Handler
+ .endm
+
+ def_irq_default_handler DMA0_IRQHandler
+ def_irq_default_handler DMA1_IRQHandler
+ def_irq_default_handler DMA2_IRQHandler
+ def_irq_default_handler DMA3_IRQHandler
+ def_irq_default_handler DMA_Error_IRQHandler
+ def_irq_default_handler FTFL_IRQHandler
+ def_irq_default_handler Read_Collision_IRQHandler
+ def_irq_default_handler LVD_LVW_IRQHandler
+ def_irq_default_handler LLW_IRQHandler
+ def_irq_default_handler Watchdog_IRQHandler
+ def_irq_default_handler I2C0_IRQHandler
+ def_irq_default_handler SPI0_IRQHandler
+ def_irq_default_handler I2S0_Tx_IRQHandler
+ def_irq_default_handler I2S0_Rx_IRQHandler
+ def_irq_default_handler UART0_LON_IRQHandler
+ def_irq_default_handler UART0_RX_TX_IRQHandler
+ def_irq_default_handler UART0_ERR_IRQHandler
+ def_irq_default_handler UART1_RX_TX_IRQHandler
+ def_irq_default_handler UART1_ERR_IRQHandler
+ def_irq_default_handler UART2_RX_TX_IRQHandler
+ def_irq_default_handler UART2_ERR_IRQHandler
+ def_irq_default_handler ADC0_IRQHandler
+ def_irq_default_handler CMP0_IRQHandler
+ def_irq_default_handler CMP1_IRQHandler
+ def_irq_default_handler FTM0_IRQHandler
+ def_irq_default_handler FTM1_IRQHandler
+ def_irq_default_handler CMT_IRQHandler
+ def_irq_default_handler RTC_IRQHandler
+ def_irq_default_handler RTC_Seconds_IRQHandler
+ def_irq_default_handler PIT0_IRQHandler
+ def_irq_default_handler PIT1_IRQHandler
+ def_irq_default_handler PIT2_IRQHandler
+ def_irq_default_handler PIT3_IRQHandler
+ def_irq_default_handler PDB0_IRQHandler
+ def_irq_default_handler USB0_IRQHandler
+ def_irq_default_handler USBDCD_IRQHandler
+ def_irq_default_handler TSI0_IRQHandler
+ def_irq_default_handler MCG_IRQHandler
+ def_irq_default_handler LPTimer_IRQHandler
+ def_irq_default_handler PORTA_IRQHandler
+ def_irq_default_handler PORTB_IRQHandler
+ def_irq_default_handler PORTC_IRQHandler
+ def_irq_default_handler PORTD_IRQHandler
+ def_irq_default_handler PORTE_IRQHandler
+ def_irq_default_handler SWI_IRQHandler
+ def_irq_default_handler DEF_IRQHandler
+
+/* Flash protection region, placed at 0x400 */
+ .text
+ .thumb
+ .align 2
+ .section .kinetis_flash_config_field,"a",%progbits
+kinetis_flash_config:
+ .long 0xffffffff
+ .long 0xffffffff
+ .long 0xffffffff
+ .long 0xfffffffe
+
+ .end
diff --git a/keyboard/infinity/tool/README b/keyboard/infinity/tool/README
index 3dd3316568..698314e250 100644
--- a/keyboard/infinity/tool/README
+++ b/keyboard/infinity/tool/README
@@ -2,7 +2,7 @@ OpenOCD config files for Kinetis
================================
http://nemuisan.blog.bai.ne.jp/?eid=192848#OPENOCD
-These are needed for SWD debug and programing bootloader. To flash keyboard firmware use 'dfu-util'.
+These are needed for debug and programing bootloader with SWD. To flash keyboard firmware use 'dfu-util'.
Flash security of Freescale kinetis
-----------------------------------
@@ -21,5 +21,83 @@ Flash bootloader:
Infinity SWD pinout
-------------------
-SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, VCC from top.
+SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, 5V from top.
Note that RESET is also needed to get full control with OpenOCD.
+
+ --------
+ | ___ o |CLK
+ ||RST| o |DIO
+ ||BTN| o |GND
+ | --- o |5V
+ --------
+
+
+Kinetis sercure state
+----------------------
+openocd 0.9.0
+
+Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********
+Warn : **** ****
+Warn : **** Your Kinetis MCU is in secured state, which means that, ****
+Warn : **** with exception for very basic communication, JTAG/SWD ****
+Warn : **** interface will NOT work. In order to restore its ****
+Warn : **** functionality please issue 'kinetis mdm mass_erase' ****
+Warn : **** command, power cycle the MCU and restart OpenOCD. ****
+Warn : **** ****
+Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********
+
+
+Info : MDM: Chip is unsecured. Continuing.
+target state: halted
+target halted due to debug-request, current mode: Thread
+xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
+auto erase enabled
+Info : Probing flash info for bank 0
+Warn : flash configuration field erased, please reset the device
+wrote 4096 bytes from file kiibohd_bootloader.bin in 2.442562s (1.638 KiB/s)
+Info : MDM: Chip is unsecured. Continuing.
+
+
+
+
+Open On-Chip Debugger 0.9.0-dev-00346-g3e1dfdc-dirty (2015-03-21-20:41)
+Licensed under GNU GPL v2
+For bug reports, read
+ http://openocd.sourceforge.net/doc/doxygen/bugs.html
+Info : only one transport option; autoselect 'cmsis-dap'
+Kinetis MUST need Hardware SRST Control to Recover Secure-State!
+adapter_nsrst_delay: 200
+srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
+Info : add flash_bank kinetis k20.pflash
+cortex_m reset_config sysresetreq
+adapter speed: 1000 kHz
+srst_only separate srst_nogate srst_open_drain connect_assert_srst
+Info : CMSIS-DAP: SWD Supported
+Info : CMSIS-DAP: Interface Initialised (SWD)
+Info : CMSIS-DAP: FW Version = 1.0
+Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
+Info : Connecting under reset
+Info : DAP_SWJ Sequence (reset: 50+ '1' followed by 0)
+Info : CMSIS-DAP: Interface ready
+Info : clock speed 1000 kHz
+Info : IDCODE 0x2ba01477
+Warn : Adapter returned success despite SSTICKYERR being set.
+Warn : Adapter returned success despite SSTICKYERR being set.
+Warn : Adapter returned success despite SSTICKYERR being set.
+Warn : Adapter returned success despite SSTICKYERR being set.
+Info : k20.cpu: hardware has 6 breakpoints, 4 watchpoints
+Info : MDM: Chip is unsecured. Continuing.
+Info : MDM: Chip is unsecured. Continuing.
+target state: halted
+target halted due to debug-request, current mode: Thread
+xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
+auto erase enabled
+Info : Probing flash info for bank 0
+Warn : flash configuration field erased, please reset the device
+wrote 4096 bytes from file kiibohd_bootloader.bin in 2.446902s (1.635 KiB/s)
+Info : MDM: Chip is unsecured. Continuing.
+Info : Halt timed out, wake up GDB.
+Error: timed out while waiting for target halted
+Runtime Error: tool/k20dx32_flash.cfg:81:
+in procedure 'mt_flash'
+in procedure 'halt' called at file "tool/k20dx32_flash.cfg", line 81
diff --git a/keyboard/infinity/tool/k20dx32_flash.cfg b/keyboard/infinity/tool/k20dx32_flash.cfg
index 714d9991f8..1e3deb0910 100644
--- a/keyboard/infinity/tool/k20dx32_flash.cfg
+++ b/keyboard/infinity/tool/k20dx32_flash.cfg
@@ -2,6 +2,22 @@
# Nemuisan's Special for MK20DN32VFT5,MK20DX32VFT5,MK10DN32VFT5,MK10DX32VFT5
+# 0.8.0 has no these procs
+proc using_jtag {} {
+ set _TRANSPORT [ transport select ]
+ expr { [ string first "jtag" $_TRANSPORT ] != -1 }
+}
+
+proc using_swd {} {
+ set _TRANSPORT [ transport select ]
+ expr { [ string first "swd" $_TRANSPORT ] != -1 }
+}
+
+proc using_hla {} {
+ set _TRANSPORT [ transport select ]
+ expr { [ string first "hla" $_TRANSPORT ] != -1 }
+}
+
source [find target/swj-dp.tcl]
if { [info exists CHIPNAME] } {
@@ -109,7 +125,6 @@ proc eraser {} {
shutdown
}
-
#debug_level 3
# HLA doesn't have cortex_m commands
if {![using_hla]} {
diff --git a/keyboard/kitten_paw/Makefile.lufa b/keyboard/kitten_paw/Makefile.lufa
index 4a643ea790..a45a3edb96 100644
--- a/keyboard/kitten_paw/Makefile.lufa
+++ b/keyboard/kitten_paw/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = kittenpaw_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -110,8 +110,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/kmac/Makefile.lufa b/keyboard/kmac/Makefile.lufa
index 09343d4bc4..9745f43cd4 100644
--- a/keyboard/kmac/Makefile.lufa
+++ b/keyboard/kmac/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = kmac_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -117,11 +117,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
winkey: OPT_DEFS += -DLAYOUT_WINKEY
winkey: all
diff --git a/keyboard/kmac/Makefile.pjrc b/keyboard/kmac/Makefile.pjrc
index 22ee8de47a..b32d935bdf 100644
--- a/keyboard/kmac/Makefile.pjrc
+++ b/keyboard/kmac/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = kmac_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -88,11 +88,11 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
winkey: OPT_DEFS += -DLAYOUT_WINKEY
winkey: all
diff --git a/keyboard/lightpad/Makefile.lufa b/keyboard/lightpad/Makefile.lufa
index 7bce7ebffc..88fb90ec4b 100644
--- a/keyboard/lightpad/Makefile.lufa
+++ b/keyboard/lightpad/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = lightpad_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -110,8 +110,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/lightsaber/Makefile.lufa b/keyboard/lightsaber/Makefile.lufa
index b430efd229..99090c4367 100644
--- a/keyboard/lightsaber/Makefile.lufa
+++ b/keyboard/lightsaber/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = lightsaber_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -116,11 +116,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
winkey: OPT_DEFS += -DLAYOUT_WINKEY
winkey: all
diff --git a/keyboard/lightsaber/Makefile.pjrc b/keyboard/lightsaber/Makefile.pjrc
index 58735a7ef0..0f6d399470 100644
--- a/keyboard/lightsaber/Makefile.pjrc
+++ b/keyboard/lightsaber/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = lightsaber_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -84,11 +84,11 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
winkey: OPT_DEFS += -DLAYOUT_WINKEY
winkey: all
diff --git a/keyboard/macway/Makefile.lufa b/keyboard/macway/Makefile.lufa
index 359a8c246d..8fff93ada5 100644
--- a/keyboard/macway/Makefile.lufa
+++ b/keyboard/macway/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = macway_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -114,8 +114,8 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/macway/Makefile.pjrc b/keyboard/macway/Makefile.pjrc
index 9e84a34185..6ee25b61af 100644
--- a/keyboard/macway/Makefile.pjrc
+++ b/keyboard/macway/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = macway_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -90,8 +90,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/mbed_onekey/Makefile b/keyboard/mbed_onekey/Makefile
index b1e5f5e594..b9c88fdd31 100644
--- a/keyboard/mbed_onekey/Makefile
+++ b/keyboard/mbed_onekey/Makefile
@@ -1,6 +1,6 @@
PROJECT = mbed_onekey
-TMK_DIR = ../..
+TMK_DIR = ../../tmk_core
MBED_DIR = $(TMK_DIR)/mbed-sdk
#VPATH += $(MBED_DIR):$(TMK_DIR)
diff --git a/keyboard/nerd/Makefile b/keyboard/nerd/Makefile
index 5fd382841f..30149345ce 100644
--- a/keyboard/nerd/Makefile
+++ b/keyboard/nerd/Makefile
@@ -42,7 +42,7 @@
TARGET = nerd_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -119,8 +119,8 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/Makefile b/keyboard/onekey/Makefile
index 78732e470d..0b54e7d25c 100644
--- a/keyboard/onekey/Makefile
+++ b/keyboard/onekey/Makefile
@@ -42,7 +42,7 @@
TARGET = onekey_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -124,9 +124,9 @@ CONSOLE_ENABLE = yes # Console for debug(+400)
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/Makefile.pjrc b/keyboard/onekey/Makefile.pjrc
index 24ade33505..ebf0710f73 100644
--- a/keyboard/onekey/Makefile.pjrc
+++ b/keyboard/onekey/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = onekey_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -95,9 +95,9 @@ PS2_USE_BUSYWAIT = yes # uses primitive reference code
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/Makefile.vusb b/keyboard/onekey/Makefile.vusb
new file mode 100644
index 0000000000..fb1fbdfea2
--- /dev/null
+++ b/keyboard/onekey/Makefile.vusb
@@ -0,0 +1,88 @@
+# Target file name (without extension).
+TARGET = onekey_vusb
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = atmega168p
+MCU = atmega328p
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 12000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+#MOUSEKEY_ENABLE = yes # Mouse keys
+#EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBasp 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/usbconfig.h b/keyboard/onekey/usbconfig.h
new file mode 100644
index 0000000000..d0ca4c717e
--- /dev/null
+++ b/keyboard/onekey/usbconfig.h
@@ -0,0 +1,377 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT 4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 10
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER 100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ * in YL, TCNT0
+ * sts timer0Snapshot, YL
+ * endm
+ * #endif
+ * #define USB_SOF_HOOK myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING 0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC 0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION 0x00, 0x01
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.'
+#define USB_CFG_VENDOR_NAME_LEN 6
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
+#define USB_CFG_DEVICE_NAME_LEN 23
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS 3 /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ * you want RAM pointers.
+ * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ * in static memory is in RAM, not in flash memory.
+ * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ * the driver must know the descriptor's length. The descriptor itself is
+ * found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ * char usbDescriptorDevice[];
+ * char usbDescriptorConfiguration[];
+ * char usbDescriptorHidReport[];
+ * char usbDescriptorString0[];
+ * int usbDescriptorStringVendor[];
+ * int usbDescriptorStringDevice[];
+ * int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ * USB_CFG_DESCR_PROPS_DEVICE
+ * USB_CFG_DESCR_PROPS_CONFIGURATION
+ * USB_CFG_DESCR_PROPS_STRINGS
+ * USB_CFG_DESCR_PROPS_STRING_0
+ * USB_CFG_DESCR_PROPS_STRING_VENDOR
+ * USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ * USB_CFG_DESCR_PROPS_HID
+ * USB_CFG_DESCR_PROPS_HID_REPORT
+ * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int serialNumberDescriptor[] = {
+ * USB_STRING_DESCRIPTOR_HEADER(6),
+ * 'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID 0
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG MCUCR */
+/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR 0 */
+/* #define USB_INTR_ENABLE GIMSK */
+/* #define USB_INTR_ENABLE_BIT INT0 */
+/* #define USB_INTR_PENDING GIFR */
+/* #define USB_INTR_PENDING_BIT INTF0 */
+/* #define USB_INTR_VECTOR INT0_vect */
+
+#endif /* __usbconfig_h_included__ */
diff --git a/keyboard/phantom/Makefile.lufa b/keyboard/phantom/Makefile.lufa
index 97756de0a1..a0b3b1444d 100644
--- a/keyboard/phantom/Makefile.lufa
+++ b/keyboard/phantom/Makefile.lufa
@@ -42,7 +42,7 @@
TARGET = phantom_lufa
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -115,11 +115,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
ansi: OPT_DEFS += -DLAYOUT_ANSI
ansi: all
diff --git a/keyboard/phantom/Makefile.pjrc b/keyboard/phantom/Makefile.pjrc
index aa01ac5ab2..7bf5f80f40 100644
--- a/keyboard/phantom/Makefile.pjrc
+++ b/keyboard/phantom/Makefile.pjrc
@@ -42,7 +42,7 @@
TARGET = phantom_pjrc
# Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -86,11 +86,11 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
# Search Path
VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
ansi: OPT_DEFS += -DLAYOUT_ANSI
ansi: all
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
index 643646155f..fc26905d80 100644
--- a/keyboard/planck/Makefile
+++ b/keyboard/planck/Makefile
@@ -44,6 +44,7 @@ TARGET = planck
# Directory common source filess exist
TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
@@ -133,6 +134,7 @@ BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
include $(TOP_DIR)/quantum.mk
diff --git a/keyboard/planck/__avr_gdbinit b/keyboard/planck/__avr_gdbinit
deleted file mode 100644
index afc51e6d19..0000000000
--- a/keyboard/planck/__avr_gdbinit
+++ /dev/null
@@ -1,6 +0,0 @@
-define reset
-SIGNAL SIGHUP
-end
-file planck_lufa.elf
-target remote localhost:4242
-break main