summaryrefslogtreecommitdiff
path: root/keyboard
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard')
l---------[-rw-r--r--]keyboard/hbkb/Makefile57
-rw-r--r--keyboard/hbkb/Makefile.lufa119
-rw-r--r--keyboard/hbkb/Makefile.pjrc (renamed from keyboard/macway/Makefile)7
-rw-r--r--keyboard/hbkb/config.h3
-rw-r--r--keyboard/hhkb/Makefile.lufa119
-rw-r--r--keyboard/hhkb/Makefile.pjrc7
-rw-r--r--keyboard/hhkb/config.h (renamed from keyboard/hhkb/config_pjrc.h)5
-rw-r--r--keyboard/hhkb/keymap.c2
-rw-r--r--keyboard/hhkb/matrix.c10
-rw-r--r--keyboard/macway/Makefile.lufa119
-rw-r--r--keyboard/macway/Makefile.pjrc95
-rw-r--r--keyboard/macway/config.h6
-rw-r--r--keyboard/macway/keymap.c10
13 files changed, 487 insertions, 72 deletions
diff --git a/keyboard/hbkb/Makefile b/keyboard/hbkb/Makefile
index 26be322e01..f00d036da3 100644..120000
--- a/keyboard/hbkb/Makefile
+++ b/keyboard/hbkb/Makefile
@@ -1,56 +1 @@
-# Target file name (without extension).
-TARGET = hbk
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
- /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
- /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+Makefile.lufa \ No newline at end of file
diff --git a/keyboard/hbkb/Makefile.lufa b/keyboard/hbkb/Makefile.lufa
new file mode 100644
index 0000000000..c73a0ca7d1
--- /dev/null
+++ b/keyboard/hbkb/Makefile.lufa
@@ -0,0 +1,119 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hbkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/macway/Makefile b/keyboard/hbkb/Makefile.pjrc
index afee38b120..159f56b44b 100644
--- a/keyboard/macway/Makefile
+++ b/keyboard/hbkb/Makefile.pjrc
@@ -1,5 +1,5 @@
# Target file name (without extension).
-TARGET = macway
+TARGET = hbkb
# Directory common source filess exist
TOP_DIR = ../..
@@ -43,7 +43,10 @@ EXTRAKEY_ENABLE = yes # Audio control and System control
#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
+ /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
+ /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
diff --git a/keyboard/hbkb/config.h b/keyboard/hbkb/config.h
index 5262399dc3..deaabb2495 100644
--- a/keyboard/hbkb/config.h
+++ b/keyboard/hbkb/config.h
@@ -24,7 +24,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBB00
#define MANUFACTURER t.m.k.
+#define DEVICE_VER 0x0100
#define PRODUCT Happy Buckling Keyboard
+
+
#define DESCRIPTION mod version of IBM Model M keyboard
diff --git a/keyboard/hhkb/Makefile.lufa b/keyboard/hhkb/Makefile.lufa
new file mode 100644
index 0000000000..cdd68f40ab
--- /dev/null
+++ b/keyboard/hhkb/Makefile.lufa
@@ -0,0 +1,119 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hhkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = at90usb1286
+#MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.pjrc b/keyboard/hhkb/Makefile.pjrc
index f6d133eae4..f8836a2ca1 100644
--- a/keyboard/hhkb/Makefile.pjrc
+++ b/keyboard/hhkb/Makefile.pjrc
@@ -13,12 +13,11 @@ TOP_DIR = ../..
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c
-CONFIG_H = config_pjrc.h
+CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
@@ -53,8 +52,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH = $(TARGET_DIR)
+VPATH = $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/config_pjrc.h b/keyboard/hhkb/config.h
index fffe3522c7..91446466fe 100644
--- a/keyboard/hhkb/config_pjrc.h
+++ b/keyboard/hhkb/config.h
@@ -21,11 +21,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* controller configuration */
#include "controller_teensy.h"
+
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xCAFE
+#define PRODUCT_ID 0xCAFF
#define DEVICE_VER 0x0101
#define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod
+
+
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
diff --git a/keyboard/hhkb/keymap.c b/keyboard/hhkb/keymap.c
index 85a7c31b7e..88a6737ba2 100644
--- a/keyboard/hhkb/keymap.c
+++ b/keyboard/hhkb/keymap.c
@@ -110,7 +110,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |Gui |Alt |Space |Alt |xxx|
* `--------------------------------------------'
*/
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
+ KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index 350066b904..79d2d98731 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -68,8 +68,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
// key: on: 0/off: 1
// prev: unknown: output previous key state(negated)?
-#ifdef HOST_PJRC
-// Ports for Teensy
+#if defined(__AVR_AT90USB1286__)
+// Ports for Teensy++
// row: PB0-2
// col: PB3-5,6
// key: PE6(pull-uped)
@@ -90,7 +90,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
-#else
+
+#elif defined(__AVR_ATmega328P__)
// Ports for V-USB
// key: PB0(pull-uped)
// prev: PB1
@@ -126,6 +127,9 @@ static bool matrix_has_ghost_in_row(uint8_t row);
DDRC &= ~0x0F; \
PORTC &= ~0x0F; \
} while (0)
+
+#else
+# error "define code for matrix scan"
#endif
diff --git a/keyboard/macway/Makefile.lufa b/keyboard/macway/Makefile.lufa
new file mode 100644
index 0000000000..9c9388ee20
--- /dev/null
+++ b/keyboard/macway/Makefile.lufa
@@ -0,0 +1,119 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/macway/Makefile.pjrc b/keyboard/macway/Makefile.pjrc
new file mode 100644
index 0000000000..ecc236e3d0
--- /dev/null
+++ b/keyboard/macway/Makefile.pjrc
@@ -0,0 +1,95 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/macway/config.h b/keyboard/macway/config.h
index b68ea20dcf..5503c77e3a 100644
--- a/keyboard/macway/config.h
+++ b/keyboard/macway/config.h
@@ -21,10 +21,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* controller configuration */
#include "controller_teensy.h"
+
+/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBEE0
+#define DEVICE_VER 0x0202
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
+
+
+/* message strings */
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
diff --git a/keyboard/macway/keymap.c b/keyboard/macway/keymap.c
index 89634e2f41..76c0d8b724 100644
--- a/keyboard/macway/keymap.c
+++ b/keyboard/macway/keymap.c
@@ -59,7 +59,7 @@ static const uint8_t PROGMEM fn_layer[] = {
3, // Fn3
4, // Fn4
0, // Fn5
- 2, // Fn6
+ 3, // Fn6
3 // Fn7
};
@@ -94,7 +94,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
- FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL),
+ FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL),
/* Layer 1: HHKB mode (HHKB Fn)
@@ -110,8 +110,8 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | |Gui |Alt | |Alt |Gui| | |Ctr|
* `-----------------------------------------------------------'
*/
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \
- CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \
+ KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \
+ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NLCK,\
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL),
@@ -155,7 +155,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \
- FN7, LGUI,LALT,BTN1,RALT,NO, NO, NO, NO),
+ FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO),
/* Layer 4: Matias half keyboard style (Space)