summaryrefslogtreecommitdiff
path: root/keyboard/planck
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/planck')
-rw-r--r--keyboard/planck/Makefile135
-rw-r--r--keyboard/planck/Makefile.pjrc116
-rw-r--r--keyboard/planck/README.md141
-rw-r--r--keyboard/planck/config.h70
-rw-r--r--keyboard/planck/keymap_common.c30
-rw-r--r--keyboard/planck/keymap_common.h52
-rw-r--r--keyboard/planck/keymap_jack.c42
-rw-r--r--keyboard/planck/led.c34
-rw-r--r--keyboard/planck/matrix.c215
9 files changed, 835 insertions, 0 deletions
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
new file mode 100644
index 0000000000..2ec324bd95
--- /dev/null
+++ b/keyboard/planck/Makefile
@@ -0,0 +1,135 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_jack.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/planck/Makefile.pjrc b/keyboard/planck/Makefile.pjrc
new file mode 100644
index 0000000000..be83ba18b1
--- /dev/null
+++ b/keyboard/planck/Makefile.pjrc
@@ -0,0 +1,116 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_jack.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DKEYMAP_PLAIN
+plain: all
+
+poker: OPT_DEFS += -DKEYMAP_POKER
+poker: all
+
+poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
+poker_set: all
+
+poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
+poker_bit: all
diff --git a/keyboard/planck/README.md b/keyboard/planck/README.md
new file mode 100644
index 0000000000..510cb5c8b6
--- /dev/null
+++ b/keyboard/planck/README.md
@@ -0,0 +1,141 @@
+GH60 keyboard firmware
+======================
+DIY compact keyboard designed and run by komar007 and Geekhack community.
+
+- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64)
+
+## GH60 Resources
+- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/)
+- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
+- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0)
+- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0)
+- [Group buy](http://geekhack.org/index.php?topic=41464.0)
+
+
+## Build
+Move to this directory then just run `make` like:
+
+ $ make
+
+Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
+
+
+## Keymap
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
+
+To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
+
+ $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
+
+
+### 1 Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+ Fn + Esc = `
+ Fn + {left, down, up, right} = {home, pgdown, pgup, end}
+
+#### 1.0 Default layer
+ ,-----------------------------------------------------------.
+ | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |-----------------------------------------------------------|
+ |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ |-----------------------------------------------------------|
+ |Ctrl|Gui |Alt | Space |Fn |Gui |App |Ctrl|
+ `-----------------------------------------------------------'
+#### 1.1 Poker Fn layer
+ ,-----------------------------------------------------------.
+ |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |
+ |-----------------------------------------------------------|
+ | |FnQ| Up| | | | | | |Cal| |Hom|Ins| |
+ |-----------------------------------------------------------|
+ | |Lef|Dow|Rig| | |Psc|Slk|Pau| |Tsk|End| |
+ |-----------------------------------------------------------|
+ | |Del| |Web|Mut|VoU|VoD| |PgU|PgD|Del| Up |
+ |-----------------------------------------------------------|
+ | | | | FnS |Fn |Left|Down|Righ|
+ `-----------------------------------------------------------'
+
+
+### 2. Plain
+Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
+See [keymap_plain.c](keymap_plain.c) for detail.
+
+#### 1.0 Plain Default layer
+ ,-----------------------------------------------------------.
+ |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |-----------------------------------------------------------|
+ |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ |-----------------------------------------------------------|
+ |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl|
+ `-----------------------------------------------------------'
+
+
+### 3. Hasu
+This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+
+
+### 4. SpaceFN
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+
+#### 4.0 Default layer
+ ,-----------------------------------------------------------.
+ |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |-----------------------------------------------------------|
+ |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ |-----------------------------------------------------------|
+ |Ctrl|Gui |Alt | Space/Fn |Alt |Gui |App |Ctrl|
+ `-----------------------------------------------------------'
+#### 4.1 SpaceFN layer
+ ,-----------------------------------------------------------.
+ |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+ |-----------------------------------------------------------|
+ | | | | | | | |Hom|Up |End|Psc|Slk|Pau|Ins |
+ |-----------------------------------------------------------|
+ | | | | | | |PgU|Lef|Dow|Rig| | | |
+ |-----------------------------------------------------------|
+ | | | | | |Spc|PgD|` |~ | | | |
+ |-----------------------------------------------------------|
+ | | | | Fn | | | | |
+ `-----------------------------------------------------------'
+
+
+### 5. HHKB
+[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+#### 5.0: Default layer
+ ,-----------------------------------------------------------.
+ |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Bspc |
+ |-----------------------------------------------------------|
+ |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn |
+ |-----------------------------------------------------------|
+ | |Gui |Alt | Space | |Alt |Gui | |
+ `-----------------------------------------------------------'
+#### 5.1: HHKB Fn layer
+ ,-----------------------------------------------------------.
+ |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ |-----------------------------------------------------------|
+ |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
+ |-----------------------------------------------------------|
+ | |VoD|VoU|Mut|Ejc| | *| /|Hom|PgU|Lef|Rig|Enter |
+ |-----------------------------------------------------------|
+ | | | | | | | +| -|End|PgD|Dow| | |
+ |-----------------------------------------------------------|
+ | | | | | | | | |
+ `-----------------------------------------------------------'
+
diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h
new file mode 100644
index 0000000000..81637f45b2
--- /dev/null
+++ b/keyboard/planck/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER jackhumbert
+#define PRODUCT Planck
+#define DESCRIPTION t.m.k. keyboard firmware for the Planck
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/planck/keymap_common.c b/keyboard/planck/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/planck/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/planck/keymap_common.h b/keyboard/planck/keymap_common.h
new file mode 100644
index 0000000000..7c95fb8e7c
--- /dev/null
+++ b/keyboard/planck/keymap_common.h
@@ -0,0 +1,52 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* GH60 keymap definition macro
+ * K2C, K31 and K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+ K30, K31, K32, K33, K34, K36, K37, K38, K39, K3A, K3B \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \
+}
+
+#endif
diff --git a/keyboard/planck/keymap_jack.c b/keyboard/planck/keymap_jack.c
new file mode 100644
index 0000000000..a1d7e36b9c
--- /dev/null
+++ b/keyboard/planck/keymap_jack.c
@@ -0,0 +1,42 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Jack */
+ TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,
+ ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
+ FN26, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT),
+[1] = KEYMAP( /* Jack RAISE */
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY),
+[2] = KEYMAP( /* Jack LOWER */
+ FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN25,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+ [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
+
+ [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+ [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+ [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+ [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+ [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+ [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+ [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+ [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+ [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+ [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+ [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+ [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+ [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+ [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+ [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+ [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+ [26] = ACTION_MODS_KEY(MOD_LSFT, MOD_RSFT),
+};
diff --git a/keyboard/planck/led.c b/keyboard/planck/led.c
new file mode 100644
index 0000000000..7c98510801
--- /dev/null
+++ b/keyboard/planck/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ if (usb_led & (1<<USB_LED_FUNCTION)) {
+ // Output high.
+ DDRF |= (1<<0);
+ PORTF |= (1<<0);
+ } else {
+ // Output low.
+ DDRF &= ~(1<<0);
+ PORTF &= ~(1<<0);
+ }
+}
diff --git a/keyboard/planck/matrix.c b/keyboard/planck/matrix.c
new file mode 100644
index 0000000000..720ac30043
--- /dev/null
+++ b/keyboard/planck/matrix.c
@@ -0,0 +1,215 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "action_layer.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ uint8_t layer = biton32(layer_state);
+ switch (layer) {
+ case 1:
+ case 2:
+ DDRC |= (1<<7);
+ PORTC |= (1<<7);
+ break;
+ case 0:
+ DDRC &= ~(1<<7);
+ PORTC &= ~(1<<7);
+ break;
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+/* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7 8 9 10 11
+ * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
+ */
+
+static void init_cols(void)
+{
+ DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+ PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+ DDRD &= ~(1<<0);
+ PORTD |= (1<<0);
+ DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+ PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+}
+
+static matrix_row_t read_cols(void)
+{
+ return (PINB&(1<<0) ? 0 : (1<< 0)) |
+ (PINB&(1<<1) ? 0 : (1<< 1)) |
+ (PINB&(1<<2) ? 0 : (1<< 2)) |
+ (PINB&(1<<3) ? 0 : (1<< 3)) |
+ (PINB&(1<<7) ? 0 : (1<< 4)) |
+ (PIND&(1<<0) ? 0 : (1<< 5)) |
+ (PINF&(1<<7) ? 0 : (1<< 6)) |
+ (PINF&(1<<6) ? 0 : (1<< 7)) |
+ (PINF&(1<<5) ? 0 : (1<< 8)) |
+ (PINF&(1<<4) ? 0 : (1<< 9)) |
+ (PINF&(1<<1) ? 0 : (1<<10)) |
+ (PINF&(1<<0) ? 0 : (1<<11));
+}
+
+/* Row pin configuration
+ * row: 0 1 2 3
+ * pin: B0 B1 B2 B3
+ */
+static void unselect_rows(void)
+{
+ // Hi-Z(DDR:0, PORT:0) to unselect
+ DDRB &= ~0b01110000;
+ PORTB &= ~0b01110000;
+ DDRD &= ~0b10000000;
+ PORTD &= ~0b10000000;
+}
+
+static void select_row(uint8_t row)
+{
+ switch (row) {
+ case 0:
+ DDRB |= (1<<6);
+ PORTB &= ~(1<<6);
+ break;
+ case 1:
+ DDRB |= (1<<5);
+ PORTB &= ~(1<<5);
+ break;
+ case 2:
+ DDRB |= (1<<4);
+ PORTB &= ~(1<<4);
+ break;
+ case 3:
+ DDRD |= (1<<7);
+ PORTD &= ~(1<<7);
+ break;
+ }
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 16:00:17 +0000