summaryrefslogtreecommitdiff
path: root/keyboard/lightsaber
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/lightsaber')
-rw-r--r--keyboard/lightsaber/Makefile.lufa126
-rw-r--r--keyboard/lightsaber/Makefile.pjrc94
-rw-r--r--keyboard/lightsaber/README.md26
-rw-r--r--keyboard/lightsaber/backlight.c86
-rw-r--r--keyboard/lightsaber/backlight.h9
-rw-r--r--keyboard/lightsaber/config.h46
-rw-r--r--keyboard/lightsaber/keymap.c77
-rw-r--r--keyboard/lightsaber/keymap_winkey.h29
-rw-r--r--keyboard/lightsaber/led.c54
-rw-r--r--keyboard/lightsaber/matrix.c292
10 files changed, 839 insertions, 0 deletions
diff --git a/keyboard/lightsaber/Makefile.lufa b/keyboard/lightsaber/Makefile.lufa
new file mode 100644
index 0000000000..25cacacc4e
--- /dev/null
+++ b/keyboard/lightsaber/Makefile.lufa
@@ -0,0 +1,126 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = lightsaber_lufa
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = keymap.c \
+ matrix.c \
+ led.c \
+ backlight.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 8000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+#MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
+
+winkey: OPT_DEFS += -DLAYOUT_WINKEY
+winkey: all
diff --git a/keyboard/lightsaber/Makefile.pjrc b/keyboard/lightsaber/Makefile.pjrc
new file mode 100644
index 0000000000..e5dec297cd
--- /dev/null
+++ b/keyboard/lightsaber/Makefile.pjrc
@@ -0,0 +1,94 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = lightsaber_pjrc
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c \
+ backlight.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = atmega32u4
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 8000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+#MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
+
+winkey: OPT_DEFS += -DLAYOUT_WINKEY
+winkey: all
diff --git a/keyboard/lightsaber/README.md b/keyboard/lightsaber/README.md
new file mode 100644
index 0000000000..9dcd693095
--- /dev/null
+++ b/keyboard/lightsaber/README.md
@@ -0,0 +1,26 @@
+Lightsaber keyboard firmware
+======================
+Korean custom keyboard designed by Duck.
+
+*Note that this is not the official firmware*
+
+Supported models
+----------------
+All pcb options are supported.
+
+
+Build
+-----
+Move to this directory then just run `make` like:
+
+ $ make -f Makefile.[pjrc|lufa]
+
+Use `Makefile.pjrc` if you want to use PJRC stack or use `Makefile.lufa` for LUFA stack.
+
+
+Bootloader
+---------
+The PCB is hardwired to run the bootloader if the key at the `one above backspace` position is held down when connecting the keyboard.
+
+It is still possible to use Boot Magic and Command to access the bootloader though.
+
diff --git a/keyboard/lightsaber/backlight.c b/keyboard/lightsaber/backlight.c
new file mode 100644
index 0000000000..59b8b4a633
--- /dev/null
+++ b/keyboard/lightsaber/backlight.c
@@ -0,0 +1,86 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "backlight.h"
+
+/* Backlight pin configuration
+ *
+ * Alphas PB1 (high)
+ * Numeric PB2 (high)
+ * Mod+Num PB3 (high)
+ * Backside PD6 (high)
+ * TopRight PD7 (low)
+ * F-Row PE6 (high)
+ */
+
+void backlight_set(uint8_t level)
+{
+ // Set as output.
+ DDRB |= (1<<1) | (1<<2) | (1<<3);
+ DDRD |= (1<<6) | (1<<7);
+ DDRE |= (1<<6);
+
+ if (level & BACKLIGHT_ALPHA)
+ {
+ PORTB |= (1<<1);
+ }
+ else
+ {
+ PORTB &= ~(1<<1);
+ }
+ if (level & BACKLIGHT_NUMERIC)
+ {
+ PORTB |= (1<<2);
+ }
+ else
+ {
+ PORTB &= ~(1<<2);
+ }
+ if (level & BACKLIGHT_MODNUM)
+ {
+ PORTB |= (1<<3);
+ }
+ else
+ {
+ PORTB &= ~(1<<3);
+ }
+ if (level & BACKLIGHT_BACKSIDE)
+ {
+ PORTD |= (1<<6);
+ }
+ else
+ {
+ PORTD &= ~(1<<6);
+ }
+ if (level & BACKLIGHT_TOPRIGHT)
+ {
+ PORTD &= ~(1<<7);
+ }
+ else
+ {
+ PORTD |= (1<<7);
+ }
+ if (level & BACKLIGHT_FROW)
+ {
+ PORTE |= (1<<6);
+ }
+ else
+ {
+ PORTE &= ~(1<<6);
+ }
+}
diff --git a/keyboard/lightsaber/backlight.h b/keyboard/lightsaber/backlight.h
new file mode 100644
index 0000000000..6dc7967a62
--- /dev/null
+++ b/keyboard/lightsaber/backlight.h
@@ -0,0 +1,9 @@
+
+enum backlight_level {
+ BACKLIGHT_ALPHA = 0b0000001,
+ BACKLIGHT_NUMERIC = 0b0000010,
+ BACKLIGHT_MODNUM = 0b0000100,
+ BACKLIGHT_BACKSIDE = 0b0001000,
+ BACKLIGHT_TOPRIGHT = 0b0010000,
+ BACKLIGHT_FROW = 0b0100000,
+};
diff --git a/keyboard/lightsaber/config.h b/keyboard/lightsaber/config.h
new file mode 100644
index 0000000000..d971d038e3
--- /dev/null
+++ b/keyboard/lightsaber/config.h
@@ -0,0 +1,46 @@
+/*
+Copyright 2013 Mathias Andersson <wraul@dbox.se>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6050
+#define DEVICE_VER 0x0104
+#define MANUFACTURER Duck
+#define PRODUCT Lightsaber
+
+/* message strings */
+#define DESCRIPTION t.m.k. keyboard firmware for Lightsaber
+
+/* matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 18
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 1
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE 5
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
diff --git a/keyboard/lightsaber/keymap.c b/keyboard/lightsaber/keymap.c
new file mode 100644
index 0000000000..477da9d865
--- /dev/null
+++ b/keyboard/lightsaber/keymap.c
@@ -0,0 +1,77 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * Keymap for Lightsaber controller
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "debug.h"
+#include "keymap.h"
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+#define KEYMAP( \
+ K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, K3R, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2O, K2P, K2Q, K2R, \
+ K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, K1P, K1Q, K1R, \
+ K0A, K0B, K0C, K0G, K0K, K0L, K0M, K0N, K0O, K0P, K0Q, K0R \
+) { \
+/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 */ \
+/* 5 */ { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5O, KC_##K5P, KC_##K5Q, KC_##K5R}, \
+/* 4 */ { KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F, KC_##K4G, KC_##K4H, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4O, KC_##K4P, KC_##K4Q, KC_##K4R}, \
+/* 3 */ { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3O, KC_##K3P, KC_##K3Q, KC_##K3R}, \
+/* 2 */ { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2O, KC_##K2P, KC_##K2Q, KC_##K2R}, \
+/* 1 */ { KC_##K1A, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_NO, KC_##K1M, KC_##K1N, KC_##K1O, KC_##K1P, KC_##K1Q, KC_##K1R}, \
+/* 0 */ { KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_NO, KC_##K0G, KC_NO, KC_NO, KC_##K0K, KC_NO, KC_##K0L, KC_NO, KC_##K0M, KC_##K0N, KC_##K0O, KC_##K0P, KC_##K0Q, KC_##K0R} \
+}
+
+#include "keymap_winkey.h"
+
+#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0]))
+#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ if (layer < KEYMAPS_SIZE) {
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+ } else {
+ // fall back to layer 0
+ return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]);
+ }
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ action_t action;
+ if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
+ action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
+ } else {
+ action.code = ACTION_NO;
+ }
+ return action;
+}
diff --git a/keyboard/lightsaber/keymap_winkey.h b/keyboard/lightsaber/keymap_winkey.h
new file mode 100644
index 0000000000..3e8367083c
--- /dev/null
+++ b/keyboard/lightsaber/keymap_winkey.h
@@ -0,0 +1,29 @@
+#include "backlight.h"
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ KEYMAP(\
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, INS, PSCR, SLCK, BRK, \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NUMLOCK,KP_SLASH,KP_ASTERISK,KP_MINUS, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, KP_7, KP_8, KP_9, KP_PLUS, \
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,FN0, ENT, KP_4, KP_5, KP_6, NO, \
+ LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,NO, RSFT, KP_1, KP_2, KP_3, KP_ENTER, \
+ LCTL,LGUI,LALT, SPC, NO, RALT,RGUI,RCTL, KP_0, NO, KP_DOT, NO), \
+ KEYMAP(\
+ CALC,MYCM,WSCH,WHOM,MAIL,MUTE,VOLD,VOLU,MSEL,MSTP,MPLY,MPRV,MNXT,TRNS, TRNS, WAKE, PWR, SLEP, \
+ FN1, FN2, FN3, FN4, FN5, FN6, FN7, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
+ TRNS,TRNS,TRNS,TRNS,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
+ TRNS, TRNS,TRNS,TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
+ TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS)
+};
+
+static const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1),
+ [1] = ACTION_BACKLIGHT_TOGGLE(),
+ [2] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_ALPHA),
+ [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_MODNUM),
+ [4] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_NUMERIC),
+ [5] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FROW),
+ [6] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_BACKSIDE),
+ [7] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_TOPRIGHT)
+};
diff --git a/keyboard/lightsaber/led.c b/keyboard/lightsaber/led.c
new file mode 100644
index 0000000000..c3f85427f5
--- /dev/null
+++ b/keyboard/lightsaber/led.c
@@ -0,0 +1,54 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+/* LED pin configuration
+ *
+ * Caps PB0 (low)
+ * NumLock PB4 (low)
+ *
+ */
+void led_set(uint8_t usb_led)
+{
+ // Set as output.
+ DDRB |= (1<<0) | (1<<4);
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ {
+ // Output low.
+ PORTB &= ~(1<<0);
+ }
+ else
+ {
+ // Output high.
+ PORTB |= (1<<0);
+ }
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ {
+ // Output low.
+ PORTB &= ~(1<<4);
+ }
+ else
+ {
+ // Output high.
+ PORTB |= (1<<4);
+ }
+}
diff --git a/keyboard/lightsaber/matrix.c b/keyboard/lightsaber/matrix.c
new file mode 100644
index 0000000000..e3eca84df8
--- /dev/null
+++ b/keyboard/lightsaber/matrix.c
@@ -0,0 +1,292 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(void);
+static uint8_t read_fwkey(void);
+static void init_rows(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ unselect_cols();
+ init_rows();
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) { // 0-17
+ select_col(col);
+ _delay_us(3); // TODO: Determine the correct value needed here.
+ uint8_t rows = read_rows();
+ // Use the otherwise unused col: 12 row: 3 for firmware.
+ if(col == 12) {
+ rows |= read_fwkey();
+ }
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) { // 0-5
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = rows & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
+ debouncing = DEBOUNCE;
+ }
+ }
+ unselect_cols();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop32(matrix[i]);
+ }
+ return count;
+}
+
+/* Row pin configuration
+ * row: 0 1 2 3 4 5
+ * pin: PD0 PD1 PD2 PD3 PD5 PB7
+ *
+ * Firmware uses its own pin PE2
+ */
+static void init_rows(void)
+{
+ // Input (DDR:0, PORT:0)
+ DDRD &= ~0b00101111;
+ PORTD &= ~0b00101111;
+ DDRB &= ~(1<<7);
+ PORTB &= ~(1<<7);
+
+ // Input with pull-up (DDR:0, PORT:1)
+ DDRE &= ~(1<<2);
+ PORTE |= (1<<2);
+}
+
+static uint8_t read_rows(void)
+{
+ return (PIND&(1<<0) ? (1<<0) : 0) |
+ (PIND&(1<<1) ? (1<<1) : 0) |
+ (PIND&(1<<2) ? (1<<2) : 0) |
+ (PIND&(1<<3) ? (1<<3) : 0) |
+ (PIND&(1<<5) ? (1<<4) : 0) |
+ (PINB&(1<<7) ? (1<<5) : 0);
+}
+
+static uint8_t read_fwkey(void)
+{
+ return PINE&(1<<2) ? 0 : (1<<3);
+}
+
+/* Columns 0 - 15
+ * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
+ * col / pin: PC6 PB6 PF0 PF1 PC7
+ * 0: 1 0 0 0 0
+ * 1: 1 0 1 0 0
+ * 2: 1 0 0 1 0
+ * 3: 1 0 1 1 0
+ * 4: 1 0 0 0 1
+ * 5: 1 0 1 0 1
+ * 6: 1 0 0 1 1
+ * 7: 1 0 1 1 1
+ * 8: 0 1 0 0 0
+ * 9: 0 1 1 0 0
+ * 10: 0 1 0 1 0
+ * 11: 0 1 1 1 0
+ * 12: 0 1 0 0 1
+ * 13: 0 1 1 0 1
+ * 14: 0 1 0 1 1
+ * 15: 0 1 1 1 1
+ *
+ * col: 16
+ * pin: PB5
+ *
+ * col: 17
+ * pin: PD4
+ */
+static void unselect_cols(void)
+{
+ DDRB |= (1<<5) | (1<<6);
+ PORTB &= ~((1<<5) | (1<<6));
+
+ DDRC |= (1<<6) | (1<<7);
+ PORTC &= ~((1<<6) | (1<<7));
+
+ DDRD |= (1<<4);
+ PORTD &= ~(1<<4);
+
+ DDRF |= (1<<0) | (1<<1);
+ PORTF &= ~((1<<0) | (1<<1));
+}
+
+static void select_col(uint8_t col)
+{
+ // Output high (DDR:1, PORT:1) to select
+ switch (col) {
+ case 0:
+ PORTC |= (1<<6);
+ break;
+ case 1:
+ PORTC |= (1<<6);
+ PORTF |= (1<<0);
+ break;
+ case 2:
+ PORTC |= (1<<6);
+ PORTF |= (1<<1);
+ break;
+ case 3:
+ PORTC |= (1<<6);
+ PORTF |= (1<<0) | (1<<1);
+ break;
+ case 4:
+ PORTC |= (1<<6);
+ PORTC |= (1<<7);
+ break;
+ case 5:
+ PORTC |= (1<<6);
+ PORTF |= (1<<0);
+ PORTC |= (1<<7);
+ break;
+ case 6:
+ PORTC |= (1<<6);
+ PORTF |= (1<<1);
+ PORTC |= (1<<7);
+ break;
+ case 7:
+ PORTC |= (1<<6);
+ PORTF |= (1<<0) | (1<<1);
+ PORTC |= (1<<7);
+ break;
+ case 8:
+ PORTB |= (1<<6);
+ break;
+ case 9:
+ PORTB |= (1<<6);
+ PORTF |= (1<<0);
+ break;
+ case 10:
+ PORTB |= (1<<6);
+ PORTF |= (1<<1);
+ break;
+ case 11:
+ PORTB |= (1<<6);
+ PORTF |= (1<<0) | (1<<1);
+ break;
+ case 12:
+ PORTB |= (1<<6);
+ PORTC |= (1<<7);
+ break;
+ case 13:
+ PORTB |= (1<<6);
+ PORTF |= (1<<0);
+ PORTC |= (1<<7);
+ break;
+ case 14:
+ PORTB |= (1<<6);
+ PORTF |= (1<<1);
+ PORTC |= (1<<7);
+ break;
+ case 15:
+ PORTB |= (1<<6);
+ PORTF |= (1<<0) | (1<<1);
+ PORTC |= (1<<7);
+ break;
+ case 16:
+ PORTB |= (1<<5);
+ break;
+ case 17:
+ PORTD |= (1<<4);
+ break;
+ }
+}