summaryrefslogtreecommitdiff
path: root/keyboard/hhkb_rn42/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/hhkb_rn42/config.h')
-rw-r--r--keyboard/hhkb_rn42/config.h112
1 files changed, 0 insertions, 112 deletions
diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb_rn42/config.h
deleted file mode 100644
index 21e73f1c53..0000000000
--- a/keyboard/hhkb_rn42/config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x4242
-#define DEVICE_VER 0x0104
-#define MANUFACTURER t.m.k.
-#define PRODUCT HHKB mod
-#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
-
-
-/* matrix size */
-#ifdef HHKB_JP
-# define MATRIX_ROWS 16
-#else
-# define MATRIX_ROWS 8
-#endif
-#define MATRIX_COLS 8
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-
-/* period of tapping(ms) */
-#define TAPPING_TERM 300
-/* tap count needed for toggling a feature */
-#define TAPPING_TOGGLE 5
-/* Oneshot timeout(ms) */
-#define ONESHOT_TIMEOUT 300
-
-/* Boot Magic salt key: Space */
-#define BOOTMAGIC_KEY_SALT KC_FN6
-
-/* power control of key switch board */
-#define HHKB_POWER_SAVING
-
-/*
- * Hardware Serial(UART)
- * Baud rate are calculated with round off(+0.5).
- */
-#ifdef __AVR_ATmega32U4__
- /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
- #define UCSR1D _SFR_MEM8(0xCB)
- #define RTSEN 0
- #define CTSEN 1
-
- #define SERIAL_UART_BAUD 115200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
- UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
- UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
- DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
- sei(); \
- } while(0)
- #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
- #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
-#else
- #error "USART configuration is needed."
-#endif
-
-
-/* for debug */
-#define SUART_OUT_PORT PORTD
-#define SUART_OUT_BIT 0
-#define SUART_IN_PIN PIND
-#define SUART_IN_BIT 1
-
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif