summaryrefslogtreecommitdiff
path: root/keyboard/hhkb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/hhkb')
-rw-r--r--keyboard/hhkb/Makefile.tmk4
-rw-r--r--keyboard/hhkb/doc/Power.txt48
-rw-r--r--keyboard/hhkb/matrix.c31
3 files changed, 77 insertions, 6 deletions
diff --git a/keyboard/hhkb/Makefile.tmk b/keyboard/hhkb/Makefile.tmk
index 32dd5796f5..d3730081ff 100644
--- a/keyboard/hhkb/Makefile.tmk
+++ b/keyboard/hhkb/Makefile.tmk
@@ -71,7 +71,7 @@ MCU = atmega32u4
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
-F_CPU = 8000000
+F_CPU = 16000000
#
@@ -109,7 +109,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
diff --git a/keyboard/hhkb/doc/Power.txt b/keyboard/hhkb/doc/Power.txt
new file mode 100644
index 0000000000..1287053c3c
--- /dev/null
+++ b/keyboard/hhkb/doc/Power.txt
@@ -0,0 +1,48 @@
+HHKB Power consumption
+----------------------
+
+**Power consumption
+ board clock/prescaler keyswitch power ctrl current
+ --------------------------------------------------------------------------
+ tmk 16MHz no no 26.4mA
+ tmk 16MHz pro1 no 45.1mA
+ tmk 16MHz/2 no no 18.1mA
+ tmk 16MHz/2 pro1 no 37.3mA
+ tmk 8MHz no no 18.9mA
+ tmk 8MHz pro2 no(w/o FET) 32.1mA
+ tmk 8MHz pro2 no(w FET) 32.1mA withou POWER_ON/FF
+ tmk 8MHz pro2 no(w FET) 32.6mA with POWR_ON/OFF
+ tmk 8MHz pro2 15ms(w FET) 21.3mA with POWR_ON/OFF, enumerated but error -32
+ tmk 8MHz pro2 60ms(w FET) 13.3mA with POWR_ON/OFF, not enumerated
+
+ gh60 16MHz 25.8mA
+ gh60 16MHz USB suspend w LED breathing 17.6-29.1mA
+ gh60 16MHz USB suspend w/o LED 0.2mA(0.231-0.276mA)
+ Poker 5.6mA
+ Poker USB suspend 0.3mA(0.301mA)
+ gh60 16MHz stock firmware by komar 26.8mA
+
+
+ HHKB pro2 Over All 139.4mA
+ HHKB pro2 Controller 115.1mA
+ HHKB pro1 Controller 25.9mA
+
+
+keyswitch power consumption:
+pro1: 45.1-26.4=18.7mA
+ 37.3-18.1=19.2mA
+pro2: 32.1-18.9=13.2mA
+
+
+
+
+
+**Low Freq Crystal or Prescaler?
+No advantage of Low Freq Crystal against Prescaled.
+
+Clock routing
+X'tal --+---->Prescaler-------> System Clock
+ |
+ +---------------------> USB PLL
+
+Design Decision: Install 16MHz crystal on board with using clock rescaler.
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index cf4bf9a7de..d0731ef1f8 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -63,7 +63,7 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
PORTE |= (1<<6); \
} while (0)
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
+ (((COL) & 0x07)<<3) | \
((ROW) & 0x07))
#define KEY_ENABLE() (PORTB &= ~(1<<6))
#define KEY_UNABLE() (PORTB |= (1<<6))
@@ -79,16 +79,20 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
// col: PB3-5,6
// key: PD7(pull-uped)
// prev: PB7
+// power: PD4(L:off/H:on)
#define KEY_INIT() do { \
DDRB = 0xFF; \
PORTB = 0x00; \
DDRD &= ~0x80; \
PORTD |= 0x80; \
+ /* keyswitch board power on */ \
+ DDRD |= (1<<4); \
+ PORTD |= (1<<4); \
KEY_UNABLE(); \
KEY_PREV_OFF(); \
} while (0)
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
+ (((COL) & 0x07)<<3) | \
((ROW) & 0x07))
#define KEY_ENABLE() (PORTB &= ~(1<<6))
#define KEY_UNABLE() (PORTB |= (1<<6))
@@ -97,6 +101,20 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
#define KEY_PREV_OFF() (PORTB &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
+/*
+#define KEY_POWER_ON() do { \
+ KEY_INIT(); \
+ PORTD |= (1<<4); \
+ _delay_ms(1); \
+} while (0)
+#define KEY_POWER_OFF() do { \
+ PORTD &= ~(1<<4); \
+ DDRB &= ~0xFF; \
+ PORTB &= ~0xFF; \
+ DDRB &= ~0x80; \
+ PORTB &= ~0x80; \
+} while (0)
+*/
#elif defined(__AVR_ATmega328P__)
@@ -195,16 +213,21 @@ uint8_t matrix_scan(void)
uint8_t last = TIMER_RAW;
KEY_ENABLE();
+
// Wait for KEY_STATE outputs its value.
// 1us was ok on one HHKB, but not worked on another.
// no wait doesn't work on Teensy++ with pro(1us works)
// no wait does work on tmk PCB(8MHz) with pro2
// 1us wait does work on both of above
+ // 1us wait doesn't work on tmk(16MHz)
+ // 5us wait does work on tmk(16MHz)
+ // 5us wait does work on tmk(16MHz/2)
+ // 5us wait does work on tmk(8MHz)
// 10us wait does work on Teensy++ with pro
// 10us wait does work on 328p+iwrap with pro
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
- _delay_us(1);
-// _delay_us(10);
+ _delay_us(5);
+
if (KEY_STATE()) {
matrix[row] &= ~(1<<col);
} else {