summaryrefslogtreecommitdiff
path: root/keyboard/hhkb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/hhkb')
-rw-r--r--keyboard/hhkb/Makefile (renamed from keyboard/hhkb/Makefile.lufa)4
-rw-r--r--keyboard/hhkb/README.md72
-rw-r--r--keyboard/hhkb/config.h19
3 files changed, 29 insertions, 66 deletions
diff --git a/keyboard/hhkb/Makefile.lufa b/keyboard/hhkb/Makefile
index 262282a014..1ef0a0187a 100644
--- a/keyboard/hhkb/Makefile.lufa
+++ b/keyboard/hhkb/Makefile
@@ -57,7 +57,9 @@ CONFIG_H = config.h
# MCU name
+# PJRC Teensy++ 2.0
#MCU = at90usb1286
+# TMK Alt Controller or PJRC Teensy 2.0
MCU = atmega32u4
# Processor frequency.
@@ -100,7 +102,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
+# Atmel DFU loader 4096 (TMK Alt Controller)
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md
index b9e0b534a2..3959ae85a8 100644
--- a/keyboard/hhkb/README.md
+++ b/keyboard/hhkb/README.md
@@ -8,7 +8,6 @@ See [this thread][AltController] in geekhack.org.
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
[AltController]: http://geekhack.org/index.php?topic=12047.0
-[Teensy]: http://www.pjrc.com/teensy/
##Features
@@ -22,8 +21,8 @@ See README of [tmk_keyboard] for more.
[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
###Pros
-* No risk: Everything is all reversible
-* Without PCB trace cutting, case mod or any destructives
+* No risks: Everything is all reversible
+* No need for PCB trace patching, case cutting or any other destructive mod
* Can keep original controller intact
* Can change all HHKB behaviour as you like
@@ -41,61 +40,35 @@ See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HH
##Build Firmware & Program
-You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]).
+See [this document](../../doc/build.md) first.
-### Install Tools
-See [this document](../../doc/build.md).
+### Configuration
+Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`.
-### TMK Alt Controller Board
- $ make -f Makefile.tmk
+### Build
+Just run make after intall tools.
-This programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
+ $ make
- $ make -f Makefile.tmk dfu
-
-Push reset button and program with [FLIP]. The tool should be intalled and configured properly.
-
- $ make -f Makefile.tmk flip
-
-Or you can also program with FLIP GUI.
-
-[dfu-programmer]: http://dfu-programmer.sourceforge.net/
-[FLIP]: http://www.atmel.com/tools/FLIP.aspx
-
-
-### PJRC Teensy++
-Build with [LUFA] USB stack:
-
- $ make -f Makefile.lufa
-
-or with [PJRC] USB stack:
+Use `Makefile.pjrc` if you want to use PJRC stack instead of LUFA.(LUFA is recommended.)
$ make -f Makefile.pjrc
-Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly.
-
- $ make -f Makefile.lufa teensy
- $ make -f Makefile.pjrc teensy
-
-Or you can also program with [Teensy Loader(GUI)].
+Use `Makefile.vusb` for [V-USB] controller.(not supported actively any more.)
+ $ make -f Makefile.vusb
-[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
-[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
-[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html
-[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html
+### Program
+First, push reset button on board to start bootloader.
+This command programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
-###AVR Mega with [V-USB]
-Build:
- $ make -f Makefile.vusb
+ $ make dfu
-Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude].
+Or you can also use [FLIP] command to program. Also the tool should be intalled and configured properly. FLIP GUI app is also available.
-You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU.
- $ make -f Makefile.vusb program
+ $ make flip
-[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx
-[avrdude]: http://www.nongnu.org/avrdude/
+Use [Teensy Loader] if your controller is Teensy/Teensy++.
##How to Customize
@@ -103,7 +76,7 @@ See [tmk_keyboard] documents.
##Hardware
-You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY.
+You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with [V-USB] library is also cheapear option for DIY.
###1. TMK Alt Controller Board
TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
@@ -127,7 +100,6 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
+---------------+
- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
-[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
###3. V-USB connection
+---+ +---------------+
@@ -156,5 +128,11 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
- NOTE: [USBaspLoader] is very useful for firmware update.
+
+[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
+[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
+[dfu-programmer]: http://dfu-programmer.sourceforge.net/
+[FLIP]: http://www.atmel.com/tools/FLIP.aspx
+[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
[V-USB]: http://www.obdev.at/products/vusb/index.html
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
diff --git a/keyboard/hhkb/config.h b/keyboard/hhkb/config.h
index ebee0c0366..83a911beab 100644
--- a/keyboard/hhkb/config.h
+++ b/keyboard/hhkb/config.h
@@ -31,27 +31,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
-/*
- * Boot magic keys
- * call some function by pressing key when pluging cable or powering on.
- */
-/* key position on matrix(ROW:COL) */
-#define KEY_FN 0x54
-#define KEY_D 0x14
-#define KEY_IS_ON(key) matrix_is_on((key)>>4, (key)&0xF)
-/* kick up bootloader */
-#define IS_BOOTMAGIC_BOOTLOADER() KEY_IS_ON(KEY_FN)
-/* debug on */
-#define IS_BOOTMAGIC_DEBUG() KEY_IS_ON(KEY_D)
-
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 100
-#endif
/* period of tapping(ms) */
#define TAPPING_TERM 300
@@ -62,11 +45,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Boot Magic salt key: Space */
#define BOOTMAGIC_KEY_SALT KC_FN6
+
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
-
/* disable debug print */
//#define NO_DEBUG