diff options
Diffstat (limited to 'keyboard/hhkb/README.md')
| -rw-r--r-- | keyboard/hhkb/README.md | 51 |
1 files changed, 10 insertions, 41 deletions
diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md index 3959ae85a8..9213648237 100644 --- a/keyboard/hhkb/README.md +++ b/keyboard/hhkb/README.md @@ -1,8 +1,8 @@ Alternative Controller for HHKB Pro =================================== -I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and -firmware source code is not open, of course. This means customizing this keyboard needs to replace original -controller with programmable one. This controller can work with HHKB Professional and Professional 2 model. +I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and firmware source code is not open, of course. This means customizing this keyboard needs to replace original controller with programmable one. + +This controller can work with HHKB **Professional**, **Professional** 2 and **Type-S**. See [this thread][AltController] in geekhack.org. @@ -46,16 +46,10 @@ See [this document](../../doc/build.md) first. Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. ### Build -Just run make after intall tools. - - $ make - -Use `Makefile.pjrc` if you want to use PJRC stack instead of LUFA.(LUFA is recommended.) +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like: - $ make -f Makefile.pjrc + $ make KEYMAP=[hasu|hhkb|spacefn|<name>] -Use `Makefile.vusb` for [V-USB] controller.(not supported actively any more.) - $ make -f Makefile.vusb ### Program First, push reset button on board to start bootloader. @@ -71,8 +65,8 @@ Or you can also use [FLIP] command to program. Also the tool should be intalled Use [Teensy Loader] if your controller is Teensy/Teensy++. -##How to Customize -See [tmk_keyboard] documents. +##Keymap +To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files. ##Hardware @@ -83,7 +77,7 @@ TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://gi See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923). -###2. PJRC Teensy++ 2.0 connection +###2. PJRC Teensy++ 2.0 version +---------------+ | Teensy++ | | | @@ -101,32 +95,8 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923). - NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/) -###3. V-USB connection - +---+ +---------------+ - USB GND | | ATmega328p | - ~~~ C3 | | - 5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2 - R1 | | ~~~~~~~~ ~~~~ - D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7) - D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10) - Z1 Z2 | PC3|------->ENABLE (12) (11) - GND<----+---+-----------|GND PB0|<-------KEY (4) (3) - | PB1|------->PREV (5) (4) - | | - GND+-C2--+--|XTAL1 RXD|------->Debug Console - X1 | TXD|<-------Debug Console - GND+-C3--+--|XTAL2 RST|---SW--+GND - +---------------+ - R1: 1.5K Ohm - R2,R3: 68 Ohm - Z1,Z2: Zener 3.6V - C1,C2: 22pF - C3: 0.1uF - X1: Crystal 12MHz - SW: Push Switch(for bootloader) - -- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack. -- NOTE: [USBaspLoader] is very useful for firmware update. +###3. V-USB version +See [V-USB controller for HHKB](doc/V-USB.md) [LUFA]: http://www.fourwalledcubicle.com/LUFA.php @@ -135,4 +105,3 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923). [FLIP]: http://www.atmel.com/tools/FLIP.aspx [Teensy Loader]: http://www.pjrc.com/teensy/loader.html [V-USB]: http://www.obdev.at/products/vusb/index.html -[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html |