summaryrefslogtreecommitdiff
path: root/keyboard/cluepad
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/cluepad')
-rw-r--r--keyboard/cluepad/Makefile136
-rw-r--r--keyboard/cluepad/backlight.c54
-rw-r--r--keyboard/cluepad/cluepad.c39
-rw-r--r--keyboard/cluepad/cluepad.h41
-rw-r--r--keyboard/cluepad/config.h102
-rw-r--r--keyboard/cluepad/keymaps/keymap_default.c122
6 files changed, 494 insertions, 0 deletions
diff --git a/keyboard/cluepad/Makefile b/keyboard/cluepad/Makefile
new file mode 100644
index 0000000000..cfa130d75a
--- /dev/null
+++ b/keyboard/cluepad/Makefile
@@ -0,0 +1,136 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = cluepad
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = cluepad.c backlight.c
+
+ifdef KEYMAP
+ SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymaps/keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable numpad's backlight functionality
+RGBLIGHT_ENABLE = yes
+# MIDI_ENABLE = YES # MIDI controls
+# UNICODE_ENABLE = YES # Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk
diff --git a/keyboard/cluepad/backlight.c b/keyboard/cluepad/backlight.c
new file mode 100644
index 0000000000..c0f8539494
--- /dev/null
+++ b/keyboard/cluepad/backlight.c
@@ -0,0 +1,54 @@
+#include <avr/io.h>
+#include "backlight.h"
+#include "led.h"
+
+#include "print.h"
+
+int pwm_level;
+
+void led_set(uint8_t usb_led)
+{
+ print("led_set\n");
+}
+
+void init_backlight_pin(void)
+{
+ // Set C7 to output
+ DDRC |= (1<<7);
+
+ // Initialize the timer
+ TC4H = 0x03;
+ OCR4C = 0xFF;
+ TCCR4A = 0b10000010;
+ TCCR4B = 0b00000001;
+}
+
+void backlight_set(uint8_t level)
+{
+ // Determine the PWM level
+ switch (level)
+ {
+ case 0:
+ // 33%
+ pwm_level = 0x54;
+ break;
+ case 1:
+ // 66%
+ pwm_level = 0xA8;
+ break;
+ case 2:
+ // 100%
+ pwm_level = 0xFF;
+ break;
+ case 3:
+ // 0%
+ pwm_level = 0x00;
+ break;
+ default:
+ xprintf("Unknown level: %d\n", level);
+ }
+
+ // Write the PWM level to the timer
+ TC4H = pwm_level >> 8;
+ OCR4A = 0xFF & pwm_level;
+}
diff --git a/keyboard/cluepad/cluepad.c b/keyboard/cluepad/cluepad.c
new file mode 100644
index 0000000000..ff3be5b9b5
--- /dev/null
+++ b/keyboard/cluepad/cluepad.c
@@ -0,0 +1,39 @@
+#include "cluepad.h"
+
+__attribute__ ((weak))
+void * matrix_init_user(void) {
+ // leave these blank
+};
+
+__attribute__ ((weak))
+void * matrix_scan_user(void) {
+ // leave these blank
+};
+
+void * matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ if (matrix_init_user) {
+ (*matrix_init_user)();
+ }
+
+ #ifdef BACKLIGHT_ENABLE
+ init_backlight_pin();
+ #endif
+
+ #ifdef RGBLIGHT_ENABLE
+ rgblight_init();
+ #endif
+
+ // JTAG disable for PORT F. write JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+};
+
+void * matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ if (matrix_scan_user) {
+ (*matrix_scan_user)();
+ }
+};
diff --git a/keyboard/cluepad/cluepad.h b/keyboard/cluepad/cluepad.h
new file mode 100644
index 0000000000..0d10d50b8f
--- /dev/null
+++ b/keyboard/cluepad/cluepad.h
@@ -0,0 +1,41 @@
+#ifndef CLUEPAD_H
+#define CLUEPAD_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include <stddef.h>
+
+
+/* Cluepad matrix layout
+ * .-------------------.
+ * |NLCK| /| *| -|
+ * |-------------------|
+ * | 7| 8| 9| |
+ * |--------------| |
+ * | 4| 5| 6| +|
+ * |-------------------|
+ * | 1| 2| 3| |
+ * |--------------| |
+ * | 0| .| Ent|
+ * '-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ k00, k01, k02, k03, \
+ k10, k11, k12, k13, \
+ k20, k21, k22, \
+ k30, k31, k32, k33, \
+ k40, k42 \
+) { \
+ { k00, k01, k02, k03, }, \
+ { k10, k11, k12, k13, }, \
+ { k20, k21, k22, KC_NO, }, \
+ { k30, k31, k32, k33, }, \
+ { k40, KC_NO, k42, KC_NO } \
+}
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif
diff --git a/keyboard/cluepad/config.h b/keyboard/cluepad/config.h
new file mode 100644
index 0000000000..5ed421a6e0
--- /dev/null
+++ b/keyboard/cluepad/config.h
@@ -0,0 +1,102 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xC1ED
+#define PRODUCT_ID 0x2312
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Clueboard
+#define PRODUCT Cluepad with RGB Underlighting
+#define DESCRIPTION QMK keyboard firmware for Cluepad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+// COLS: Left to right, ROWS: Top to bottom
+
+/* Column pin configuration
+ * col: 0 1 2 3
+ * pin: F4 E6 B1 D2
+ */
+#define COLS (int []){ F4, E6, B1, D2 }
+
+ /* Row pin configuration
+ * row: 0 1 2 3 4
+ * pin:
+ */
+#define ROWS (int []){ B0, D3, D5, D4, D6 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Number of backlighting levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Underlight configuration
+ */
+ #define ws2812_PORTREG PORTF
+ #define ws2812_DDRREG DDRF
+ #define ws2812_pin 6
+ #define RGBLED_NUM 4 // Number of LEDs
+ #define RGBLIGHT_HUE_STEP 10
+ #define RGBLIGHT_SAT_STEP 17
+ #define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* Debug forcibly enabled */
+#define ALWAYS_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/cluepad/keymaps/keymap_default.c b/keyboard/cluepad/keymaps/keymap_default.c
new file mode 100644
index 0000000000..32cb43c745
--- /dev/null
+++ b/keyboard/cluepad/keymaps/keymap_default.c
@@ -0,0 +1,122 @@
+#include "cluepad.h"
+
+#include "backlight.h"
+#include "rgblight.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * .-------------------.
+ * |NL F| /| *| -|
+ * |-------------------|
+ * | 7| 8| 9| |
+ * |--------------| |
+ * | 4| 5| 6| +|
+ * |-------------------|
+ * | 1| 2| 3| |
+ * |--------------| |
+ * | 0| .| Ent|
+ * '-------------------'
+ */
+[_BL] = KEYMAP(
+ LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
+ KC_P7, KC_P8, KC_P9, KC_PPLS, \
+ KC_P4, KC_P5, KC_P6, \
+ KC_P1, KC_P2, KC_P3, KC_PENT, \
+ KC_P0, KC_PDOT),
+
+ /* Keymap _FL: Function Layer
+ * .-------------------.
+ * |NL F| | | Fn0|
+ * |-------------------|
+ * | Fn2| | Fn4| |
+ * |--------------| |
+ * | Fn3|BL_S| Fn5| Fn6|
+ * |-------------------|
+ * | | | | |
+ * |--------------| |
+ * | Fn1| | Fn7|
+ * '-------------------'
+ */
+[_FL] = KEYMAP(
+ LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, F(0), \
+ F(2), KC_TRNS, F(4), F(6), \
+ F(3), BL_STEP, F(5), \
+ KC_TRNS, KC_TRNS, KC_TRNS, F(7), \
+ F(1), KC_TRNS)
+};
+
+enum function_id {
+ RGBLED_TOGGLE,
+ RGBLED_STEP_MODE,
+ RGBLED_INCREASE_HUE,
+ RGBLED_DECREASE_HUE,
+ RGBLED_INCREASE_SAT,
+ RGBLED_DECREASE_SAT,
+ RGBLED_INCREASE_VAL,
+ RGBLED_DECREASE_VAL,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(RGBLED_TOGGLE),
+ [1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
+ [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+ [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+ [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+ [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+ [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+ [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ switch (id) {
+ case RGBLED_TOGGLE:
+ if (record->event.pressed) {
+ rgblight_toggle();
+ }
+ break;
+ case RGBLED_INCREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_increase_hue();
+ }
+ break;
+ case RGBLED_DECREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_decrease_hue();
+ }
+ break;
+ case RGBLED_INCREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_increase_sat();
+ }
+ break;
+ case RGBLED_DECREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_decrease_sat();
+ }
+ break;
+ case RGBLED_INCREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_increase_val();
+ }
+ break;
+ case RGBLED_DECREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_decrease_val();
+ }
+ break;
+ case RGBLED_STEP_MODE:
+ if (record->event.pressed) {
+ rgblight_step();
+ }
+ break;
+ }
+}
+