summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/chibios/analog.c57
-rw-r--r--drivers/chibios/serial_usart.c69
-rw-r--r--drivers/chibios/serial_usart.h78
-rw-r--r--drivers/chibios/serial_usart_duplex.c261
-rw-r--r--drivers/chibios/ws2812_pwm.c11
-rw-r--r--drivers/chibios/ws2812_spi.c45
-rw-r--r--drivers/issi/is31fl3733.c2
-rw-r--r--drivers/oled/oled_driver.c29
-rw-r--r--drivers/oled/oled_driver.h12
9 files changed, 499 insertions, 65 deletions
diff --git a/drivers/chibios/analog.c b/drivers/chibios/analog.c
index 2b3872afbb..b1081623d3 100644
--- a/drivers/chibios/analog.c
+++ b/drivers/chibios/analog.c
@@ -101,7 +101,11 @@
// Options are 12, 10, 8, and 6 bit.
#ifndef ADC_RESOLUTION
-# define ADC_RESOLUTION ADC_CFGR1_RES_10BIT
+# ifdef ADC_CFGR_RES_10BITS // ADCv3, ADCv4
+# define ADC_RESOLUTION ADC_CFGR_RES_10BITS
+# else // ADCv1, ADCv5, or the bodge for ADCv2 above
+# define ADC_RESOLUTION ADC_CFGR1_RES_10BIT
+# endif
#endif
static ADCConfig adcCfg = {};
@@ -161,8 +165,8 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) {
case B0: return TO_MUX( ADC_CHANNEL_IN12, 2 );
case B1: return TO_MUX( ADC_CHANNEL_IN1, 2 );
case B2: return TO_MUX( ADC_CHANNEL_IN12, 1 );
- case B12: return TO_MUX( ADC_CHANNEL_IN2, 3 );
- case B13: return TO_MUX( ADC_CHANNEL_IN3, 3 );
+ case B12: return TO_MUX( ADC_CHANNEL_IN3, 3 );
+ case B13: return TO_MUX( ADC_CHANNEL_IN5, 2 );
case B14: return TO_MUX( ADC_CHANNEL_IN4, 3 );
case B15: return TO_MUX( ADC_CHANNEL_IN5, 3 );
case C0: return TO_MUX( ADC_CHANNEL_IN6, 0 ); // Can also be ADC2
@@ -189,11 +193,52 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) {
case E15: return TO_MUX( ADC_CHANNEL_IN2, 3 );
case F2: return TO_MUX( ADC_CHANNEL_IN10, 0 ); // Can also be ADC2
case F4: return TO_MUX( ADC_CHANNEL_IN5, 0 );
-#elif defined(STM32F4XX) // TODO: add all pins
+#elif defined(STM32F4XX)
case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 );
- //case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 );
-#elif defined(STM32F1XX) // TODO: add all pins
+ case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 );
+ case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 );
+ case A3: return TO_MUX( ADC_CHANNEL_IN3, 0 );
+ case A4: return TO_MUX( ADC_CHANNEL_IN4, 0 );
+ case A5: return TO_MUX( ADC_CHANNEL_IN5, 0 );
+ case A6: return TO_MUX( ADC_CHANNEL_IN6, 0 );
+ case A7: return TO_MUX( ADC_CHANNEL_IN7, 0 );
+ case B0: return TO_MUX( ADC_CHANNEL_IN8, 0 );
+ case B1: return TO_MUX( ADC_CHANNEL_IN9, 0 );
+ case C0: return TO_MUX( ADC_CHANNEL_IN10, 0 );
+ case C1: return TO_MUX( ADC_CHANNEL_IN11, 0 );
+ case C2: return TO_MUX( ADC_CHANNEL_IN12, 0 );
+ case C3: return TO_MUX( ADC_CHANNEL_IN13, 0 );
+ case C4: return TO_MUX( ADC_CHANNEL_IN14, 0 );
+ case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 );
+# if STM32_ADC_USE_ADC3
+ case F3: return TO_MUX( ADC_CHANNEL_IN9, 2 );
+ case F4: return TO_MUX( ADC_CHANNEL_IN14, 2 );
+ case F5: return TO_MUX( ADC_CHANNEL_IN15, 2 );
+ case F6: return TO_MUX( ADC_CHANNEL_IN4, 2 );
+ case F7: return TO_MUX( ADC_CHANNEL_IN5, 2 );
+ case F8: return TO_MUX( ADC_CHANNEL_IN6, 2 );
+ case F9: return TO_MUX( ADC_CHANNEL_IN7, 2 );
+ case F10: return TO_MUX( ADC_CHANNEL_IN8, 2 );
+# endif
+#elif defined(STM32F1XX)
case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 );
+ case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 );
+ case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 );
+ case A3: return TO_MUX( ADC_CHANNEL_IN3, 0 );
+ case A4: return TO_MUX( ADC_CHANNEL_IN4, 0 );
+ case A5: return TO_MUX( ADC_CHANNEL_IN5, 0 );
+ case A6: return TO_MUX( ADC_CHANNEL_IN6, 0 );
+ case A7: return TO_MUX( ADC_CHANNEL_IN7, 0 );
+ case B0: return TO_MUX( ADC_CHANNEL_IN8, 0 );
+ case B1: return TO_MUX( ADC_CHANNEL_IN9, 0 );
+ case C0: return TO_MUX( ADC_CHANNEL_IN10, 0 );
+ case C1: return TO_MUX( ADC_CHANNEL_IN11, 0 );
+ case C2: return TO_MUX( ADC_CHANNEL_IN12, 0 );
+ case C3: return TO_MUX( ADC_CHANNEL_IN13, 0 );
+ case C4: return TO_MUX( ADC_CHANNEL_IN14, 0 );
+ case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 );
+ // STM32F103x[C-G] in 144-pin packages also have analog inputs on F6...F10, but they are on ADC3, and the
+ // ChibiOS ADC driver for STM32F1xx currently supports only ADC1, therefore these pins are not usable.
#endif
}
diff --git a/drivers/chibios/serial_usart.c b/drivers/chibios/serial_usart.c
index 7c81b16464..cae29388c3 100644
--- a/drivers/chibios/serial_usart.c
+++ b/drivers/chibios/serial_usart.c
@@ -1,13 +1,20 @@
-#include "quantum.h"
-#include "serial.h"
-#include "print.h"
-
-#include <ch.h>
-#include <hal.h>
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
-#ifndef USART_CR1_M0
-# define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so
-#endif
+#include "serial_usart.h"
#ifndef USE_GPIOV1
// The default PAL alternate modes are used to signal that the pins are used for USART
@@ -20,50 +27,10 @@
# define SERIAL_USART_DRIVER SD1
#endif
-#ifndef SERIAL_USART_CR1
-# define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0) // parity enable, odd parity, 9 bit length
-#endif
-
-#ifndef SERIAL_USART_CR2
-# define SERIAL_USART_CR2 (USART_CR2_STOP_1) // 2 stop bits
-#endif
-
-#ifndef SERIAL_USART_CR3
-# define SERIAL_USART_CR3 0
-#endif
-
#ifdef SOFT_SERIAL_PIN
# define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
#endif
-#ifndef SELECT_SOFT_SERIAL_SPEED
-# define SELECT_SOFT_SERIAL_SPEED 1
-#endif
-
-#ifdef SERIAL_USART_SPEED
-// Allow advanced users to directly set SERIAL_USART_SPEED
-#elif SELECT_SOFT_SERIAL_SPEED == 0
-# define SERIAL_USART_SPEED 460800
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-# define SERIAL_USART_SPEED 230400
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-# define SERIAL_USART_SPEED 115200
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-# define SERIAL_USART_SPEED 57600
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-# define SERIAL_USART_SPEED 38400
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-# define SERIAL_USART_SPEED 19200
-#else
-# error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif
-
-#ifndef SERIAL_USART_TIMEOUT
-# define SERIAL_USART_TIMEOUT 100
-#endif
-
-#define HANDSHAKE_MAGIC 7
-
static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) {
msg_t ret = sdWrite(driver, data, size);
@@ -123,6 +90,10 @@ __attribute__((weak)) void usart_init(void) {
#else
palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
#endif
+
+#if defined(USART_REMAP)
+ USART_REMAP;
+#endif
}
void usart_master_init(void) {
diff --git a/drivers/chibios/serial_usart.h b/drivers/chibios/serial_usart.h
new file mode 100644
index 0000000000..d35b5d12c6
--- /dev/null
+++ b/drivers/chibios/serial_usart.h
@@ -0,0 +1,78 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "serial.h"
+#include "printf.h"
+
+#include <ch.h>
+#include <hal.h>
+
+#ifndef USART_CR1_M0
+# define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so
+#endif
+
+#ifndef SERIAL_USART_CR1
+# define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0) // parity enable, odd parity, 9 bit length
+#endif
+
+#ifndef SERIAL_USART_CR2
+# define SERIAL_USART_CR2 (USART_CR2_STOP_1) // 2 stop bits
+#endif
+
+#ifndef SERIAL_USART_CR3
+# define SERIAL_USART_CR3 0
+#endif
+
+#if defined(USART1_REMAP)
+# define USART_REMAP do { (AFIO->MAPR |= AFIO_MAPR_USART1_REMAP); } while(0)
+#elif defined(USART2_REMAP)
+# define USART_REMAP do { (AFIO->MAPR |= AFIO_MAPR_USART2_REMAP); } while(0)
+#elif defined(USART3_PARTIALREMAP)
+# define USART_REMAP do { (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_PARTIALREMAP); } while(0)
+#elif defined(USART3_FULLREMAP)
+# define USART_REMAP do { (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); } while(0)
+#endif
+
+#ifndef SELECT_SOFT_SERIAL_SPEED
+# define SELECT_SOFT_SERIAL_SPEED 1
+#endif
+
+#ifdef SERIAL_USART_SPEED
+// Allow advanced users to directly set SERIAL_USART_SPEED
+#elif SELECT_SOFT_SERIAL_SPEED == 0
+# define SERIAL_USART_SPEED 460800
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+# define SERIAL_USART_SPEED 230400
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+# define SERIAL_USART_SPEED 115200
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+# define SERIAL_USART_SPEED 57600
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+# define SERIAL_USART_SPEED 38400
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+# define SERIAL_USART_SPEED 19200
+#else
+# error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif
+
+#ifndef SERIAL_USART_TIMEOUT
+# define SERIAL_USART_TIMEOUT 100
+#endif
+
+#define HANDSHAKE_MAGIC 7
diff --git a/drivers/chibios/serial_usart_duplex.c b/drivers/chibios/serial_usart_duplex.c
new file mode 100644
index 0000000000..cc9b889ac2
--- /dev/null
+++ b/drivers/chibios/serial_usart_duplex.c
@@ -0,0 +1,261 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "serial_usart.h"
+
+#include <stdatomic.h>
+
+#if !defined(USE_GPIOV1)
+// The default PAL alternate modes are used to signal that the pins are used for USART
+# if !defined(SERIAL_USART_TX_PAL_MODE)
+# define SERIAL_USART_TX_PAL_MODE 7
+# endif
+# if !defined(SERIAL_USART_RX_PAL_MODE)
+# define SERIAL_USART_RX_PAL_MODE 7
+# endif
+#endif
+
+#if !defined(SERIAL_USART_DRIVER)
+# define SERIAL_USART_DRIVER UARTD1
+#endif
+
+#if !defined(SERIAL_USART_TX_PIN)
+# define SERIAL_USART_TX_PIN A9
+#endif
+
+#if !defined(SERIAL_USART_RX_PIN)
+# define SERIAL_USART_RX_PIN A10
+#endif
+
+#define SIGNAL_HANDSHAKE_RECEIVED 0x1
+
+void handle_transactions_slave(uint8_t sstd_index);
+static void receive_transaction_handshake(UARTDriver* uartp, uint16_t received_handshake);
+
+/*
+ * UART driver configuration structure. We use the blocking DMA enabled API and
+ * the rxchar callback to receive handshake tokens but only on the slave halve.
+ */
+// clang-format off
+static UARTConfig uart_config = {
+ .txend1_cb = NULL,
+ .txend2_cb = NULL,
+ .rxend_cb = NULL,
+ .rxchar_cb = NULL,
+ .rxerr_cb = NULL,
+ .timeout_cb = NULL,
+ .speed = (SERIAL_USART_SPEED),
+ .cr1 = (SERIAL_USART_CR1),
+ .cr2 = (SERIAL_USART_CR2),
+ .cr3 = (SERIAL_USART_CR3)
+};
+// clang-format on
+
+static SSTD_t* Transaction_table = NULL;
+static uint8_t Transaction_table_size = 0;
+static atomic_uint_least8_t handshake = 0xFF;
+static thread_reference_t tp_target = NULL;
+
+/*
+ * This callback is invoked when a character is received but the application
+ * was not ready to receive it, the character is passed as parameter.
+ * Receive transaction table index from initiator, which doubles as basic handshake token. */
+static void receive_transaction_handshake(UARTDriver* uartp, uint16_t received_handshake) {
+ /* Check if received handshake is not a valid transaction id.
+ * Please note that we can still catch a seemingly valid handshake
+ * i.e. a byte from a ongoing transfer which is in the allowed range.
+ * So this check mainly prevents any obviously wrong handshakes and
+ * subsequent wakeups of the receiving thread, which is a costly operation. */
+ if (received_handshake > Transaction_table_size) {
+ return;
+ }
+
+ handshake = (uint8_t)received_handshake;
+ chSysLockFromISR();
+ /* Wakeup receiving thread to start a transaction. */
+ chEvtSignalI(tp_target, (eventmask_t)SIGNAL_HANDSHAKE_RECEIVED);
+ chSysUnlockFromISR();
+}
+
+__attribute__((weak)) void usart_init(void) {
+#if defined(USE_GPIOV1)
+ palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+ palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT);
+#else
+ palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+ palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+#endif
+}
+
+/*
+ * This thread runs on the slave half and reacts to transactions initiated from the master.
+ */
+static THD_WORKING_AREA(waSlaveThread, 1024);
+static THD_FUNCTION(SlaveThread, arg) {
+ (void)arg;
+ chRegSetThreadName("slave_usart_tx_rx");
+
+ while (true) {
+ /* We sleep as long as there is no handshake waiting for us. */
+ chEvtWaitAny((eventmask_t)SIGNAL_HANDSHAKE_RECEIVED);
+ handle_transactions_slave(handshake);
+ }
+}
+
+void soft_serial_target_init(SSTD_t* const sstd_table, int sstd_table_size) {
+ Transaction_table = sstd_table;
+ Transaction_table_size = (uint8_t)sstd_table_size;
+ usart_init();
+
+#if defined(USART_REMAP)
+ USART_REMAP;
+#endif
+
+ tp_target = chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL);
+
+ // Start receiving handshake tokens on slave halve
+ uart_config.rxchar_cb = receive_transaction_handshake;
+ uartStart(&SERIAL_USART_DRIVER, &uart_config);
+}
+
+/**
+ * @brief React to transactions started by the master.
+ * This version uses duplex send and receive usart pheriphals and DMA backed transfers.
+ */
+void inline handle_transactions_slave(uint8_t sstd_index) {
+ size_t buffer_size = 0;
+ msg_t msg = 0;
+ SSTD_t* trans = &Transaction_table[sstd_index];
+
+ /* Send back the handshake which is XORed as a simple checksum,
+ to signal that the slave is ready to receive possible transaction buffers */
+ sstd_index ^= HANDSHAKE_MAGIC;
+ buffer_size = (size_t)sizeof(sstd_index);
+ msg = uartSendTimeout(&SERIAL_USART_DRIVER, &buffer_size, &sstd_index, TIME_MS2I(SERIAL_USART_TIMEOUT));
+
+ if (msg != MSG_OK) {
+ if (trans->status) {
+ *trans->status = TRANSACTION_NO_RESPONSE;
+ }
+ return;
+ }
+
+ /* Receive transaction buffer from the master. If this transaction requires it.*/
+ buffer_size = (size_t)trans->initiator2target_buffer_size;
+ if (buffer_size) {
+ msg = uartReceiveTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->initiator2target_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
+ if (msg != MSG_OK) {
+ if (trans->status) {
+ *trans->status = TRANSACTION_NO_RESPONSE;
+ }
+ return;
+ }
+ }
+
+ /* Send transaction buffer to the master. If this transaction requires it. */
+ buffer_size = (size_t)trans->target2initiator_buffer_size;
+ if (buffer_size) {
+ msg = uartSendFullTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->target2initiator_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
+ if (msg != MSG_OK) {
+ if (trans->status) {
+ *trans->status = TRANSACTION_NO_RESPONSE;
+ }
+ return;
+ }
+ }
+
+ if (trans->status) {
+ *trans->status = TRANSACTION_ACCEPTED;
+ }
+}
+
+void soft_serial_initiator_init(SSTD_t* const sstd_table, int sstd_table_size) {
+ Transaction_table = sstd_table;
+ Transaction_table_size = (uint8_t)sstd_table_size;
+ usart_init();
+
+#if defined(SERIAL_USART_PIN_SWAP)
+ uart_config.cr2 |= USART_CR2_SWAP; // master has swapped TX/RX pins
+#endif
+
+#if defined(USART_REMAP)
+ USART_REMAP;
+#endif
+
+ uartStart(&SERIAL_USART_DRIVER, &uart_config);
+}
+
+/**
+ * @brief Start transaction from the master to the slave.
+ * This version uses duplex send and receive usart pheriphals and DMA backed transfers.
+ *
+ * @param index Transaction Table index of the transaction to start.
+ * @return int TRANSACTION_NO_RESPONSE in case of Timeout.
+ * TRANSACTION_TYPE_ERROR in case of invalid transaction index.
+ * TRANSACTION_END in case of success.
+ */
+#if !defined(SERIAL_USE_MULTI_TRANSACTION)
+int soft_serial_transaction(void) {
+ uint8_t sstd_index = 0;
+#else
+int soft_serial_transaction(int index) {
+ uint8_t sstd_index = index;
+#endif
+
+ if (sstd_index > Transaction_table_size) {
+ return TRANSACTION_TYPE_ERROR;
+ }
+
+ SSTD_t* const trans = &Transaction_table[sstd_index];
+ msg_t msg = 0;
+ size_t buffer_size = (size_t)sizeof(sstd_index);
+
+ /* Send transaction table index to the slave, which doubles as basic handshake token. */
+ uartSendFullTimeout(&SERIAL_USART_DRIVER, &buffer_size, &sstd_index, TIME_MS2I(SERIAL_USART_TIMEOUT));
+
+ uint8_t sstd_index_shake = 0xFF;
+ buffer_size = (size_t)sizeof(sstd_index_shake);
+
+ /* Receive the handshake token from the slave. The token was XORed by the slave as a simple checksum.
+ If the tokens match, the master will start to send and receive possible transaction buffers. */
+ msg = uartReceiveTimeout(&SERIAL_USART_DRIVER, &buffer_size, &sstd_index_shake, TIME_MS2I(SERIAL_USART_TIMEOUT));
+ if (msg != MSG_OK || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
+ dprintln("USART: Handshake Failed");
+ return TRANSACTION_NO_RESPONSE;
+ }
+
+ /* Send transaction buffer to the slave. If this transaction requires it. */
+ buffer_size = (size_t)trans->initiator2target_buffer_size;
+ if (buffer_size) {
+ msg = uartSendFullTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->initiator2target_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
+ if (msg != MSG_OK) {
+ dprintln("USART: Send Failed");
+ return TRANSACTION_NO_RESPONSE;
+ }
+ }
+
+ /* Receive transaction buffer from the slave. If this transaction requires it. */
+ buffer_size = (size_t)trans->target2initiator_buffer_size;
+ if (buffer_size) {
+ msg = uartReceiveTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->target2initiator_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
+ if (msg != MSG_OK) {
+ dprintln("USART: Receive Failed");
+ return TRANSACTION_NO_RESPONSE;
+ }
+ }
+
+ return TRANSACTION_END;
+}
diff --git a/drivers/chibios/ws2812_pwm.c b/drivers/chibios/ws2812_pwm.c
index 140120d488..e6af55b6b3 100644
--- a/drivers/chibios/ws2812_pwm.c
+++ b/drivers/chibios/ws2812_pwm.c
@@ -27,6 +27,15 @@
# error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP"
#endif
+#ifndef WS2812_PWM_COMPLEMENTARY_OUTPUT
+# define WS2812_PWM_OUTPUT_MODE PWM_OUTPUT_ACTIVE_HIGH
+#else
+# if !STM32_PWM_USE_ADVANCED
+# error "WS2812_PWM_COMPLEMENTARY_OUTPUT requires STM32_PWM_USE_ADVANCED == TRUE"
+# endif
+# define WS2812_PWM_OUTPUT_MODE PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH
+#endif
+
// Push Pull or Open Drain Configuration
// Default Push Pull
#ifndef WS2812_EXTERNAL_PULLUP
@@ -247,7 +256,7 @@ void ws2812_init(void) {
.channels =
{
[0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled
- [WS2812_PWM_CHANNEL - 1] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}, // Turn on the channel we care about
+ [WS2812_PWM_CHANNEL - 1] = {.mode = WS2812_PWM_OUTPUT_MODE, .callback = NULL}, // Turn on the channel we care about
},
.cr2 = 0,
.dier = TIM_DIER_UDE, // DMA on update event for next period
diff --git a/drivers/chibios/ws2812_spi.c b/drivers/chibios/ws2812_spi.c
index 89df2987b5..e02cbabc02 100644
--- a/drivers/chibios/ws2812_spi.c
+++ b/drivers/chibios/ws2812_spi.c
@@ -32,6 +32,37 @@
# endif
#endif
+// Define SPI config speed
+// baudrate should target 3.2MHz
+// F072 fpclk = 48MHz
+// 48/16 = 3Mhz
+#if WS2812_SPI_DIVISOR == 2
+# define WS2812_SPI_DIVISOR (0)
+#elif WS2812_SPI_DIVISOR == 4
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 8
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1)
+#elif WS2812_SPI_DIVISOR == 16 // same as default
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 32
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2)
+#elif WS2812_SPI_DIVISOR == 64
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 128
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#elif WS2812_SPI_DIVISOR == 256
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#else
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0) // default
+#endif
+
+// Use SPI circular buffer
+#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
+# define WS2812_SPI_BUFFER_MODE 1 // circular buffer
+#else
+# define WS2812_SPI_BUFFER_MODE 0 // normal buffer
+#endif
+
#define BYTES_FOR_LED_BYTE 4
#define NB_COLORS 3
#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS)
@@ -81,14 +112,14 @@ void ws2812_init(void) {
palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
// TODO: more dynamic baudrate
- static const SPIConfig spicfg = {
- 0, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN),
- SPI_CR1_BR_1 | SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us (2.25 MHz)
- };
+ static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */
spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */
spiSelect(&WS2812_SPI); /* Slave Select assertion. */
+#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
+ spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#endif
}
void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) {
@@ -104,9 +135,11 @@ void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) {
// Send async - each led takes ~0.03ms, 50 leds ~1.5ms, animations flushing faster than send will cause issues.
// Instead spiSend can be used to send synchronously (or the thread logic can be added back).
-#ifdef WS2812_SPI_SYNC
+#ifndef WS2812_SPI_USE_CIRCULAR_BUFFER
+# ifdef WS2812_SPI_SYNC
spiSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
-#else
+# else
spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+# endif
#endif
}
diff --git a/drivers/issi/is31fl3733.c b/drivers/issi/is31fl3733.c
index dddf0cb734..d99e5339c9 100644
--- a/drivers/issi/is31fl3733.c
+++ b/drivers/issi/is31fl3733.c
@@ -68,7 +68,7 @@ uint8_t g_twi_transfer_buffer[20];
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0};
bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c
index 92c64399e2..082115d534 100644
--- a/drivers/oled/oled_driver.c
+++ b/drivers/oled/oled_driver.c
@@ -24,6 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "progmem.h"
+#include "keyboard.h"
+
// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf
@@ -71,6 +73,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRE_CHARGE_PERIOD 0xD9
#define VCOM_DETECT 0xDB
+// Advance Graphic Commands
+#define FADE_BLINK 0x23
+#define ENABLE_FADE 0x20
+#define ENABLE_BLINK 0x30
+
// Charge Pump Commands
#define CHARGE_PUMP 0x8D
@@ -152,6 +159,12 @@ static void InvertCharacter(uint8_t *cursor) {
}
bool oled_init(uint8_t rotation) {
+#if defined(USE_I2C) && defined(SPLIT_KEYBOARD)
+ if (!is_keyboard_master()) {
+ return true;
+ }
+#endif
+
oled_rotation = oled_init_user(rotation);
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
oled_rotation_width = OLED_DISPLAY_WIDTH;
@@ -539,7 +552,13 @@ bool oled_on(void) {
oled_timeout = timer_read32() + OLED_TIMEOUT;
#endif
- static const uint8_t PROGMEM display_on[] = {I2C_CMD, DISPLAY_ON};
+ static const uint8_t PROGMEM display_on[] =
+#ifdef OLED_FADE_OUT
+ {I2C_CMD, FADE_BLINK, 0x00};
+#else
+ {I2C_CMD, DISPLAY_ON};
+#endif
+
if (!oled_active) {
if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
print("oled_on cmd failed\n");
@@ -555,7 +574,13 @@ bool oled_off(void) {
return !oled_active;
}
- static const uint8_t PROGMEM display_off[] = {I2C_CMD, DISPLAY_OFF};
+ static const uint8_t PROGMEM display_off[] =
+#ifdef OLED_FADE_OUT
+ {I2C_CMD, FADE_BLINK, ENABLE_FADE | OLED_FADE_OUT_INTERVAL};
+#else
+ {I2C_CMD, DISPLAY_OFF};
+#endif
+
if (oled_active) {
if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
print("oled_off cmd failed\n");
diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h
index 72ab21247d..cbf5380ee0 100644
--- a/drivers/oled/oled_driver.h
+++ b/drivers/oled/oled_driver.h
@@ -154,10 +154,22 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# endif
#endif
+#if !defined(OLED_FADE_OUT_INTERVAL)
+# define OLED_FADE_OUT_INTERVAL 0x00
+#endif
+
+#if OLED_FADE_OUT_INTERVAL > 0x0F || OLED_FADE_OUT_INTERVAL < 0x00
+# error OLED_FADE_OUT_INTERVAL must be between 0x00 and 0x0F
+#endif
+
#if !defined(OLED_I2C_TIMEOUT)
# define OLED_I2C_TIMEOUT 100
#endif
+#if !defined(OLED_UPDATE_INTERVAL) && defined(SPLIT_KEYBOARD)
+# define OLED_UPDATE_INTERVAL 50
+#endif
+
typedef struct __attribute__((__packed__)) {
uint8_t *current_element;
uint16_t remaining_element_count;