diff options
Diffstat (limited to 'drivers/sensors/adns9800.c')
-rw-r--r-- | drivers/sensors/adns9800.c | 200 |
1 files changed, 100 insertions, 100 deletions
diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index 17966b81f9..c52f991804 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -15,88 +15,81 @@ */ #include "spi_master.h" -#include "quantum.h" #include "adns9800_srom_A6.h" #include "adns9800.h" +#include "wait.h" // registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Pixel_Sum 0x08 -#define REG_Maximum_Pixel 0x09 -#define REG_Minimum_Pixel 0x0a -#define REG_Shutter_Lower 0x0b -#define REG_Shutter_Upper 0x0c -#define REG_Frame_Period_Lower 0x0d -#define REG_Frame_Period_Upper 0x0e -#define REG_Configuration_I 0x0f -#define REG_Configuration_II 0x10 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate 0x15 -#define REG_Rest1_Downshift 0x16 -#define REG_Rest2_Rate 0x17 -#define REG_Rest2_Downshift 0x18 -#define REG_Rest3_Rate 0x19 -#define REG_Frame_Period_Max_Bound_Lower 0x1a -#define REG_Frame_Period_Max_Bound_Upper 0x1b -#define REG_Frame_Period_Min_Bound_Lower 0x1c -#define REG_Frame_Period_Min_Bound_Upper 0x1d -#define REG_Shutter_Max_Bound_Lower 0x1e -#define REG_Shutter_Max_Bound_Upper 0x1f -#define REG_LASER_CTRL0 0x20 -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_SROM_ID 0x2a -#define REG_Lift_Detection_Thr 0x2e -#define REG_Configuration_V 0x2f -#define REG_Configuration_IV 0x39 -#define REG_Power_Up_Reset 0x3a -#define REG_Shutdown 0x3b -#define REG_Inverse_Product_ID 0x3f -#define REG_Motion_Burst 0x50 -#define REG_SROM_Load_Burst 0x62 -#define REG_Pixel_Burst 0x64 - -#define ADNS_CLOCK_SPEED 2000000 -#define MIN_CPI 200 -#define MAX_CPI 8200 -#define CPI_STEP 200 -#define CLAMP_CPI(value) value < MIN_CPI ? MIN_CPI : value > MAX_CPI ? MAX_CPI : value -#define SPI_MODE 3 -#define SPI_DIVISOR (F_CPU / ADNS_CLOCK_SPEED) +// clang-format off +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Pixel_Sum 0x08 +#define REG_Maximum_Pixel 0x09 +#define REG_Minimum_Pixel 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Frame_Period_Lower 0x0d +#define REG_Frame_Period_Upper 0x0e +#define REG_Configuration_I 0x0f +#define REG_Configuration_II 0x10 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate 0x15 +#define REG_Rest1_Downshift 0x16 +#define REG_Rest2_Rate 0x17 +#define REG_Rest2_Downshift 0x18 +#define REG_Rest3_Rate 0x19 +#define REG_Frame_Period_Max_Bound_Lower 0x1a +#define REG_Frame_Period_Max_Bound_Upper 0x1b +#define REG_Frame_Period_Min_Bound_Lower 0x1c +#define REG_Frame_Period_Min_Bound_Upper 0x1d +#define REG_Shutter_Max_Bound_Lower 0x1e +#define REG_Shutter_Max_Bound_Upper 0x1f +#define REG_LASER_CTRL0 0x20 +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_SROM_ID 0x2a +#define REG_Lift_Detection_Thr 0x2e +#define REG_Configuration_V 0x2f +#define REG_Configuration_IV 0x39 +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_Motion_Burst 0x50 +#define REG_SROM_Load_Burst 0x62 +#define REG_Pixel_Burst 0x64 + +#define MIN_CPI 200 +#define MAX_CPI 8200 +#define CPI_STEP 200 +#define CLAMP_CPI(value) value<MIN_CPI ? MIN_CPI : value> MAX_CPI ? MAX_CPI : value #define US_BETWEEN_WRITES 120 -#define US_BETWEEN_READS 20 -#define US_BEFORE_MOTION 100 -#define MSB1 0x80 +#define US_BETWEEN_READS 20 +#define US_BEFORE_MOTION 100 +#define MSB1 0x80 +// clang-format on -extern const uint8_t firmware_data[]; +void adns9800_spi_start(void) { spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); } -void adns_spi_start(void){ - spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); -} - -void adns_write(uint8_t reg_addr, uint8_t data){ - - adns_spi_start(); +void adns9800_write(uint8_t reg_addr, uint8_t data) { + adns9800_spi_start(); spi_write(reg_addr | MSB1); spi_write(data); spi_stop(); wait_us(US_BETWEEN_WRITES); } -uint8_t adns_read(uint8_t reg_addr){ - - adns_spi_start(); - spi_write(reg_addr & 0x7f ); +uint8_t adns9800_read(uint8_t reg_addr) { + adns9800_spi_start(); + spi_write(reg_addr & 0x7f); uint8_t data = spi_read(); spi_stop(); wait_us(US_BETWEEN_READS); @@ -104,48 +97,47 @@ uint8_t adns_read(uint8_t reg_addr){ return data; } -void adns_init() { - - setPinOutput(SPI_SS_PIN); +void adns9800_init() { + setPinOutput(ADNS9800_CS_PIN); spi_init(); // reboot - adns_write(REG_Power_Up_Reset, 0x5a); + adns9800_write(REG_Power_Up_Reset, 0x5a); wait_ms(50); // read registers and discard - adns_read(REG_Motion); - adns_read(REG_Delta_X_L); - adns_read(REG_Delta_X_H); - adns_read(REG_Delta_Y_L); - adns_read(REG_Delta_Y_H); + adns9800_read(REG_Motion); + adns9800_read(REG_Delta_X_L); + adns9800_read(REG_Delta_X_H); + adns9800_read(REG_Delta_Y_L); + adns9800_read(REG_Delta_Y_H); // upload firmware // 3k firmware mode - adns_write(REG_Configuration_IV, 0x02); + adns9800_write(REG_Configuration_IV, 0x02); // enable initialisation - adns_write(REG_SROM_Enable, 0x1d); + adns9800_write(REG_SROM_Enable, 0x1d); // wait a frame wait_ms(10); // start SROM download - adns_write(REG_SROM_Enable, 0x18); + adns9800_write(REG_SROM_Enable, 0x18); // write the SROM file - adns_spi_start(); + adns9800_spi_start(); spi_write(REG_SROM_Load_Burst | 0x80); wait_us(15); // send all bytes of the firmware unsigned char c; - for(int i = 0; i < FIRMWARE_LENGTH; i++){ - c = (unsigned char)pgm_read_byte(firmware_data + i); + for (int i = 0; i < FIRMWARE_LENGTH; i++) { + c = (unsigned char)pgm_read_byte(adns9800_firmware_data + i); spi_write(c); wait_us(15); } @@ -155,37 +147,46 @@ void adns_init() { wait_ms(10); // enable laser - uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0); - adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0); + uint8_t laser_ctrl0 = adns9800_read(REG_LASER_CTRL0); + adns9800_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0); + + adns9800_set_cpi(ADNS9800_CPI); } -config_adns_t adns_get_config(void) { - uint8_t config_1 = adns_read(REG_Configuration_I); - return (config_adns_t){ (config_1 & 0xFF) * CPI_STEP }; +config_adns9800_t adns9800_get_config(void) { + uint8_t config_1 = adns9800_read(REG_Configuration_I); + return (config_adns9800_t){(config_1 & 0xFF) * CPI_STEP}; } -void adns_set_config(config_adns_t config) { +void adns9800_set_config(config_adns9800_t config) { uint8_t config_1 = (CLAMP_CPI(config.cpi) / CPI_STEP) & 0xFF; - adns_write(REG_Configuration_I, config_1); + adns9800_write(REG_Configuration_I, config_1); } -static int16_t convertDeltaToInt(uint8_t high, uint8_t low){ +uint16_t adns9800_get_cpi(void) { + uint8_t config_1 = adns9800_read(REG_Configuration_I); + return (uint16_t){(config_1 & 0xFF) * CPI_STEP}; +} + +void adns9800_set_cpi(uint16_t cpi) { + uint8_t config_1 = (CLAMP_CPI(cpi) / CPI_STEP) & 0xFF; + adns9800_write(REG_Configuration_I, config_1); +} +static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { // join bytes into twos compliment uint16_t twos_comp = (high << 8) | low; // convert twos comp to int - if (twos_comp & 0x8000) - return -1 * (~twos_comp + 1); + if (twos_comp & 0x8000) return -1 * (~twos_comp + 1); return twos_comp; } -report_adns_t adns_get_report(void) { +report_adns9800_t adns9800_get_report(void) { + report_adns9800_t report = {0, 0}; - report_adns_t report = {0, 0}; - - adns_spi_start(); + adns9800_spi_start(); // start burst mode spi_write(REG_Motion_Burst & 0x7f); @@ -194,8 +195,7 @@ report_adns_t adns_get_report(void) { uint8_t motion = spi_read(); - if(motion & 0x80) { - + if (motion & 0x80) { // clear observation register spi_read(); |