diff options
Diffstat (limited to 'drivers/painter')
| -rw-r--r-- | drivers/painter/gc9a01/qp_gc9a01.c | 9 | ||||
| -rw-r--r-- | drivers/painter/ili9xxx/qp_ili9163.c | 9 | ||||
| -rw-r--r-- | drivers/painter/ili9xxx/qp_ili9341.c | 9 | ||||
| -rw-r--r-- | drivers/painter/ili9xxx/qp_ili9488.c | 120 | ||||
| -rw-r--r-- | drivers/painter/ili9xxx/qp_ili9488.h | 37 | ||||
| -rw-r--r-- | drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h | 1 | ||||
| -rw-r--r-- | drivers/painter/ssd1351/qp_ssd1351.c | 9 | ||||
| -rw-r--r-- | drivers/painter/st77xx/qp_st7735.c | 144 | ||||
| -rw-r--r-- | drivers/painter/st77xx/qp_st7735.h | 45 | ||||
| -rw-r--r-- | drivers/painter/st77xx/qp_st7735_opcodes.h | 31 | ||||
| -rw-r--r-- | drivers/painter/st77xx/qp_st7789.c | 9 | ||||
| -rw-r--r-- | drivers/painter/tft_panel/qp_tft_panel.c | 60 | ||||
| -rw-r--r-- | drivers/painter/tft_panel/qp_tft_panel.h | 16 |
13 files changed, 433 insertions, 66 deletions
diff --git a/drivers/painter/gc9a01/qp_gc9a01.c b/drivers/painter/gc9a01/qp_gc9a01.c index ad76d58b07..37700a28a4 100644 --- a/drivers/painter/gc9a01/qp_gc9a01.c +++ b/drivers/painter/gc9a01/qp_gc9a01.c @@ -102,12 +102,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = { .flush = qp_tft_panel_flush, .pixdata = qp_tft_panel_pixdata, .viewport = qp_tft_panel_viewport, - .palette_convert = qp_tft_panel_palette_convert, - .append_pixels = qp_tft_panel_append_pixels, + .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, + .append_pixels = qp_tft_panel_append_pixels_rgb565, }, - .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped, - .num_window_bytes = 2, - .swap_window_coords = false, + .num_window_bytes = 2, + .swap_window_coords = false, .opcodes = { .display_on = GC9A01_CMD_DISPLAY_ON, diff --git a/drivers/painter/ili9xxx/qp_ili9163.c b/drivers/painter/ili9xxx/qp_ili9163.c index beaac0fbb5..14363c7d04 100644 --- a/drivers/painter/ili9xxx/qp_ili9163.c +++ b/drivers/painter/ili9xxx/qp_ili9163.c @@ -67,12 +67,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ili9163_driver_vtable = .flush = qp_tft_panel_flush, .pixdata = qp_tft_panel_pixdata, .viewport = qp_tft_panel_viewport, - .palette_convert = qp_tft_panel_palette_convert, - .append_pixels = qp_tft_panel_append_pixels, + .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, + .append_pixels = qp_tft_panel_append_pixels_rgb565, }, - .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped, - .num_window_bytes = 2, - .swap_window_coords = false, + .num_window_bytes = 2, + .swap_window_coords = false, .opcodes = { .display_on = ILI9XXX_CMD_DISPLAY_ON, diff --git a/drivers/painter/ili9xxx/qp_ili9341.c b/drivers/painter/ili9xxx/qp_ili9341.c index 1f41dcfc0b..9608f109bd 100644 --- a/drivers/painter/ili9xxx/qp_ili9341.c +++ b/drivers/painter/ili9xxx/qp_ili9341.c @@ -74,12 +74,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable = .flush = qp_tft_panel_flush, .pixdata = qp_tft_panel_pixdata, .viewport = qp_tft_panel_viewport, - .palette_convert = qp_tft_panel_palette_convert, - .append_pixels = qp_tft_panel_append_pixels, + .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, + .append_pixels = qp_tft_panel_append_pixels_rgb565, }, - .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped, - .num_window_bytes = 2, - .swap_window_coords = false, + .num_window_bytes = 2, + .swap_window_coords = false, .opcodes = { .display_on = ILI9XXX_CMD_DISPLAY_ON, diff --git a/drivers/painter/ili9xxx/qp_ili9488.c b/drivers/painter/ili9xxx/qp_ili9488.c new file mode 100644 index 0000000000..55cf9f896f --- /dev/null +++ b/drivers/painter/ili9xxx/qp_ili9488.c @@ -0,0 +1,120 @@ +// Copyright 2021 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qp_internal.h" +#include "qp_comms.h" +#include "qp_ili9488.h" +#include "qp_ili9xxx_opcodes.h" +#include "qp_tft_panel.h" + +#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE +# include <qp_comms_spi.h> +#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Common + +// Driver storage +tft_panel_dc_reset_painter_device_t ili9488_drivers[ILI9488_NUM_DEVICES] = {0}; + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Initialization + +bool qp_ili9488_init(painter_device_t device, painter_rotation_t rotation) { + // clang-format off + const uint8_t ili9488_init_sequence[] = { + // Command, Delay, N, Data[N] + ILI9XXX_CMD_RESET, 120, 0, + ILI9XXX_SET_PGAMMA, 0, 15, 0x00, 0x03, 0x09, 0x08, 0x16, 0x0A, 0x3F, 0x78, 0x4C, 0x09, 0x0A, 0x08, 0x16, 0x1A, 0x0F, + ILI9XXX_SET_NGAMMA, 0, 15, 0x00, 0x16, 0x19, 0x03, 0x0F, 0x05, 0x32, 0x45, 0x46, 0x04, 0x0E, 0x0D, 0x35, 0x37, 0x0F, + ILI9XXX_SET_POWER_CTL_1, 0, 2, 0x17, 0x15, + ILI9XXX_SET_POWER_CTL_2, 0, 1, 0x41, + ILI9XXX_SET_VCOM_CTL_1, 0, 3, 0x00, 0x12, 0x80, + ILI9XXX_SET_PIX_FMT, 0, 1, 0x66, + ILI9XXX_SET_RGB_IF_SIG_CTL, 0, 1, 0x80, + ILI9XXX_SET_FRAME_CTL_NORMAL, 0, 1, 0xA0, + ILI9XXX_SET_INVERSION_CTL, 0, 1, 0x02, + ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x02, 0x02, + ILI9XXX_SET_IMAGE_FUNCTION, 0, 1, 0x00, + ILI9XXX_SET_PUMP_RATIO_CTL, 0, 4, 0xA9, 0x51, 0x2C, 0x82, + ILI9XXX_CMD_SLEEP_OFF, 5, 0, + ILI9XXX_CMD_DISPLAY_ON, 20, 0 + }; + // clang-format on + qp_comms_bulk_command_sequence(device, ili9488_init_sequence, sizeof(ili9488_init_sequence)); + + // Configure the rotation (i.e. the ordering and direction of memory writes in GRAM) + const uint8_t madctl[] = { + [QP_ROTATION_0] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MY, + [QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MV | ILI9XXX_MADCTL_MY, + [QP_ROTATION_180] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX, + [QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV, + }; + qp_comms_command_databyte(device, ILI9XXX_SET_MEM_ACS_CTL, madctl[rotation]); + + return true; +} + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Driver vtable + +const struct tft_panel_dc_reset_painter_driver_vtable_t ili9488_driver_vtable = { + .base = + { + .init = qp_ili9488_init, + .power = qp_tft_panel_power, + .clear = qp_tft_panel_clear, + .flush = qp_tft_panel_flush, + .pixdata = qp_tft_panel_pixdata, + .viewport = qp_tft_panel_viewport, + .palette_convert = qp_tft_panel_palette_convert_rgb888, + .append_pixels = qp_tft_panel_append_pixels_rgb888, + }, + .num_window_bytes = 2, + .swap_window_coords = false, + .opcodes = + { + .display_on = ILI9XXX_CMD_DISPLAY_ON, + .display_off = ILI9XXX_CMD_DISPLAY_OFF, + .set_column_address = ILI9XXX_SET_COL_ADDR, + .set_row_address = ILI9XXX_SET_PAGE_ADDR, + .enable_writes = ILI9XXX_SET_MEM, + }, +}; + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// SPI + +#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE + +// Factory function for creating a handle to the ILI9488 device +painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) { + for (uint32_t i = 0; i < ILI9488_NUM_DEVICES; ++i) { + tft_panel_dc_reset_painter_device_t *driver = &ili9488_drivers[i]; + if (!driver->base.driver_vtable) { + driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&ili9488_driver_vtable; + driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable; + driver->base.native_bits_per_pixel = 24; // RGB888 + driver->base.panel_width = panel_width; + driver->base.panel_height = panel_height; + driver->base.rotation = QP_ROTATION_0; + driver->base.offset_x = 0; + driver->base.offset_y = 0; + + // SPI and other pin configuration + driver->base.comms_config = &driver->spi_dc_reset_config; + driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin; + driver->spi_dc_reset_config.spi_config.divisor = spi_divisor; + driver->spi_dc_reset_config.spi_config.lsb_first = false; + driver->spi_dc_reset_config.spi_config.mode = spi_mode; + driver->spi_dc_reset_config.dc_pin = dc_pin; + driver->spi_dc_reset_config.reset_pin = reset_pin; + return (painter_device_t)driver; + } + } + return NULL; +} + +#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// diff --git a/drivers/painter/ili9xxx/qp_ili9488.h b/drivers/painter/ili9xxx/qp_ili9488.h new file mode 100644 index 0000000000..21b8f03322 --- /dev/null +++ b/drivers/painter/ili9xxx/qp_ili9488.h @@ -0,0 +1,37 @@ +// Copyright 2021 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "gpio.h" +#include "qp_internal.h" + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Quantum Painter ILI9488 configurables (add to your keyboard's config.h) + +#ifndef ILI9488_NUM_DEVICES +/** + * @def This controls the maximum number of ILI9488 devices that Quantum Painter can communicate with at any one time. + * Increasing this number allows for multiple displays to be used. + */ +# define ILI9488_NUM_DEVICES 1 +#endif + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Quantum Painter ILI9488 device factories + +#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE +/** + * Factory method for an ILI9488 SPI LCD device. + * + * @param panel_width[in] the width of the display panel + * @param panel_height[in] the height of the display panel + * @param chip_select_pin[in] the GPIO pin used for SPI chip select + * @param dc_pin[in] the GPIO pin used for D/C control + * @param reset_pin[in] the GPIO pin used for RST + * @param spi_divisor[in] the SPI divisor to use when communicating with the display + * @param spi_mode[in] the SPI mode to use when communicating with the display + * @return the device handle used with all drawing routines in Quantum Painter + */ +painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode); +#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE diff --git a/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h b/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h index 1fa395cb89..47bb703648 100644 --- a/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h +++ b/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h @@ -85,6 +85,7 @@ #define ILI9XXX_SET_NGAMMA 0xE1 // Set negative gamma #define ILI9XXX_SET_DGAMMA_CTL_1 0xE2 // Set digital gamma ctl 1 #define ILI9XXX_SET_DGAMMA_CTL_2 0xE3 // Set digital gamma ctl 2 +#define ILI9XXX_SET_IMAGE_FUNCTION 0xE9 // Set image function #define ILI9XXX_ENABLE_3_GAMMA 0xF2 // Enable 3 gamma #define ILI9XXX_SET_IF_CTL 0xF6 // Set interface control #define ILI9XXX_SET_PUMP_RATIO_CTL 0xF7 // Set pump ratio control diff --git a/drivers/painter/ssd1351/qp_ssd1351.c b/drivers/painter/ssd1351/qp_ssd1351.c index 970e7e67f3..7ce76bab6d 100644 --- a/drivers/painter/ssd1351/qp_ssd1351.c +++ b/drivers/painter/ssd1351/qp_ssd1351.c @@ -71,12 +71,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ssd1351_driver_vtable = .flush = qp_tft_panel_flush, .pixdata = qp_tft_panel_pixdata, .viewport = qp_tft_panel_viewport, - .palette_convert = qp_tft_panel_palette_convert, - .append_pixels = qp_tft_panel_append_pixels, + .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, + .append_pixels = qp_tft_panel_append_pixels_rgb565, }, - .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped, - .num_window_bytes = 1, - .swap_window_coords = true, + .num_window_bytes = 1, + .swap_window_coords = true, .opcodes = { .display_on = SSD1351_DISPLAYON, diff --git a/drivers/painter/st77xx/qp_st7735.c b/drivers/painter/st77xx/qp_st7735.c new file mode 100644 index 0000000000..e434e31b92 --- /dev/null +++ b/drivers/painter/st77xx/qp_st7735.c @@ -0,0 +1,144 @@ +// Copyright 2021 Paul Cotter (@gr1mr3aver) +// Copyright 2021 Nick Brassel (@tzarc) +// Copyright 2022 David Hoelscher (@customMK) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qp_internal.h" +#include "qp_comms.h" +#include "qp_st7735.h" +#include "qp_st77xx_opcodes.h" +#include "qp_st7735_opcodes.h" +#include "qp_tft_panel.h" + +#ifdef QUANTUM_PAINTER_ST7735_SPI_ENABLE +# include "qp_comms_spi.h" +#endif // QUANTUM_PAINTER_ST7735_SPI_ENABLE + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Common + +// Driver storage +tft_panel_dc_reset_painter_device_t st7735_drivers[ST7735_NUM_DEVICES] = {0}; + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Automatic viewport offsets + +#ifndef ST7735_NO_AUTOMATIC_OFFSETS +static inline void st7735_automatic_viewport_offsets(painter_device_t device, painter_rotation_t rotation) { + struct painter_driver_t *driver = (struct painter_driver_t *)device; + + // clang-format off + const struct { + uint16_t offset_x; + uint16_t offset_y; + } rotation_offsets_80x160[] = { + [QP_ROTATION_0] = { .offset_x = 24, .offset_y = 0 }, + [QP_ROTATION_90] = { .offset_x = 0, .offset_y = 24 }, + [QP_ROTATION_180] = { .offset_x = 24, .offset_y = 0 }, + [QP_ROTATION_270] = { .offset_x = 0, .offset_y = 24 }, + }; + // clang-format on + + if (driver->panel_width == 80 && driver->panel_height == 160) { + driver->offset_x = rotation_offsets_80x160[rotation].offset_x; + driver->offset_y = rotation_offsets_80x160[rotation].offset_y; + } +} +#endif // ST7735_NO_AUTOMATIC_OFFSETS + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Initialization + +bool qp_st7735_init(painter_device_t device, painter_rotation_t rotation) { + // clang-format off + const uint8_t st7735_init_sequence[] = { + // Command, Delay, N, Data[N] + ST77XX_CMD_RESET, 120, 0, + ST77XX_CMD_SLEEP_OFF, 5, 0, + ST77XX_SET_PIX_FMT, 0, 1, 0x55, + ST77XX_CMD_INVERT_OFF, 0, 0, + ST77XX_CMD_NORMAL_ON, 0, 0, + ST77XX_CMD_DISPLAY_ON, 20, 0 + }; + // clang-format on + qp_comms_bulk_command_sequence(device, st7735_init_sequence, sizeof(st7735_init_sequence)); + + // Configure the rotation (i.e. the ordering and direction of memory writes in GRAM) + const uint8_t madctl[] = { + [QP_ROTATION_0] = ST77XX_MADCTL_BGR, + [QP_ROTATION_90] = ST77XX_MADCTL_BGR | ST77XX_MADCTL_MX | ST77XX_MADCTL_MV, + [QP_ROTATION_180] = ST77XX_MADCTL_BGR | ST77XX_MADCTL_MX | ST77XX_MADCTL_MY, + [QP_ROTATION_270] = ST77XX_MADCTL_BGR | ST77XX_MADCTL_MV | ST77XX_MADCTL_MY, + }; + qp_comms_command_databyte(device, ST77XX_SET_MADCTL, madctl[rotation]); + +#ifndef ST7735_NO_AUTOMATIC_VIEWPORT_OFFSETS + st7735_automatic_viewport_offsets(device, rotation); +#endif // ST7735_NO_AUTOMATIC_VIEWPORT_OFFSETS + + return true; +} + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Driver vtable + +const struct tft_panel_dc_reset_painter_driver_vtable_t st7735_driver_vtable = { + .base = + { + .init = qp_st7735_init, + .power = qp_tft_panel_power, + .clear = qp_tft_panel_clear, + .flush = qp_tft_panel_flush, + .pixdata = qp_tft_panel_pixdata, + .viewport = qp_tft_panel_viewport, + .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, + .append_pixels = qp_tft_panel_append_pixels_rgb565, + }, + .num_window_bytes = 2, + .swap_window_coords = false, + .opcodes = + { + .display_on = ST77XX_CMD_DISPLAY_ON, + .display_off = ST77XX_CMD_DISPLAY_OFF, + .set_column_address = ST77XX_SET_COL_ADDR, + .set_row_address = ST77XX_SET_ROW_ADDR, + .enable_writes = ST77XX_SET_MEM, + }, +}; + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// SPI + +#ifdef QUANTUM_PAINTER_ST7735_SPI_ENABLE + +// Factory function for creating a handle to the ST7735 device +painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) { + for (uint32_t i = 0; i < ST7735_NUM_DEVICES; ++i) { + tft_panel_dc_reset_painter_device_t *driver = &st7735_drivers[i]; + if (!driver->base.driver_vtable) { + driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&st7735_driver_vtable; + driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable; + driver->base.panel_width = panel_width; + driver->base.panel_height = panel_height; + driver->base.rotation = QP_ROTATION_0; + driver->base.offset_x = 0; + driver->base.offset_y = 0; + driver->base.native_bits_per_pixel = 16; // RGB565 + + // SPI and other pin configuration + driver->base.comms_config = &driver->spi_dc_reset_config; + driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin; + driver->spi_dc_reset_config.spi_config.divisor = spi_divisor; + driver->spi_dc_reset_config.spi_config.lsb_first = false; + driver->spi_dc_reset_config.spi_config.mode = spi_mode; + driver->spi_dc_reset_config.dc_pin = dc_pin; + driver->spi_dc_reset_config.reset_pin = reset_pin; + return (painter_device_t)driver; + } + } + return NULL; +} + +#endif // QUANTUM_PAINTER_ST7735_SPI_ENABLE + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
\ No newline at end of file diff --git a/drivers/painter/st77xx/qp_st7735.h b/drivers/painter/st77xx/qp_st7735.h new file mode 100644 index 0000000000..a9ce16bef1 --- /dev/null +++ b/drivers/painter/st77xx/qp_st7735.h @@ -0,0 +1,45 @@ +// Copyright 2021 Paul Cotter (@gr1mr3aver) +// Copyright 2021 Nick Brassel (@tzarc) +// Copyright 2022 David Hoelscher (@customMK) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "gpio.h" +#include "qp_internal.h" + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Quantum Painter ST7735 configurables (add to your keyboard's config.h) + +#ifndef ST7735_NUM_DEVICES +/** + * @def This controls the maximum number of ST7735 devices that Quantum Painter can communicate with at any one time. + * Increasing this number allows for multiple displays to be used. + */ +# define ST7735_NUM_DEVICES 1 +#endif + +// Additional configuration options to be copied to your keyboard's config.h (don't change here): + +// If you know exactly which offsets should be used on your panel with respect to selected rotation, then this config +// option allows you to save some flash space -- you'll need to invoke qp_set_viewport_offsets() instead from your keyboard. +// #define ST7735_NO_AUTOMATIC_VIEWPORT_OFFSETS + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Quantum Painter ST7735 device factories + +#ifdef QUANTUM_PAINTER_ST7735_SPI_ENABLE +/** + * Factory method for an ST7735 SPI LCD device. + * + * @param panel_width[in] the width of the display panel + * @param panel_height[in] the height of the display panel + * @param chip_select_pin[in] the GPIO pin used for SPI chip select + * @param dc_pin[in] the GPIO pin used for D/C control + * @param reset_pin[in] the GPIO pin used for RST + * @param spi_divisor[in] the SPI divisor to use when communicating with the display + * @param spi_mode[in] the SPI mode to use when communicating with the display + * @return the device handle used with all drawing routines in Quantum Painter + */ +painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode); +#endif // QUANTUM_PAINTER_ST7735_SPI_ENABLE
\ No newline at end of file diff --git a/drivers/painter/st77xx/qp_st7735_opcodes.h b/drivers/painter/st77xx/qp_st7735_opcodes.h new file mode 100644 index 0000000000..816e32f3d7 --- /dev/null +++ b/drivers/painter/st77xx/qp_st7735_opcodes.h @@ -0,0 +1,31 @@ +// Copyright 2022 David Hoelscher (@customMK) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Quantum Painter ST7735 additional command opcodes + +// Panel Function Commands +#define ST7735_SET_FRAME_RATE_CTL_1 0xB1 // Set frame rate control 1 +#define ST7735_SET_FRAME_RATE_CTL_2 0xB2 // Set frame rate control 2 +#define ST7735_SET_FRAME_RATE_CTL_3 0xB3 // Set frame rate control 3 +#define ST7735_SET_INVERSION_CTL 0xB4 // Set inversion mode control +#define ST7735_SET_DISPLAY_CTL 0xB6 // Set display control 5 +#define ST7735_SET_POWER_CTL_1 0xC0 // Set GVDD +#define ST7735_SET_POWER_CTL_2 0xC1 // Set VGH and VGL +#define ST7735_SET_POWER_CTL_3 0xC2 // Set normal mode op amp current +#define ST7735_SET_POWER_CTL_4 0xC3 // Set idle mode op amp current +#define ST7735_SET_POWER_CTL_5 0xC4 // Set partial mode op amp current +#define ST7735_SET_VCOM_CTL 0xC5 // Set VCOM voltages +#define ST7735_SET_VCOM_OFFSET_CTL 0xC7 // Set VCOM offset ctl +#define ST7735_SET_LCD_ID 0xD1 // Set LCD module version +#define ST7735_SET_PROJECT_ID 0xD2 // Set product project ID +#define ST7735_SET_POWER_CTL_6 0xFC // Set partial+idle op amp current +#define ST7735_SET_NVMEM_CTL_STATUS 0xD9 // EEPROM Control Status +#define ST7735_SET_NVMEM_READ_CMD 0xCC // EEPROM Read Command +#define ST7735_SET_NVMEM_WRITE_CMD 0xDF // EEPROM Write Command +#define ST7735_SET_PGAMMA 0xE0 // Set positive gamma +#define ST7735_SET_NGAMMA 0xE1 // Set negative gamma +#define ST7735_SET_EXTENSION_ENABLE 0xF0 // Enable extension command +#define ST7735_SET_VCOM_DELAY 0xFF // Set VCOM delay time diff --git a/drivers/painter/st77xx/qp_st7789.c b/drivers/painter/st77xx/qp_st7789.c index d005ece050..49e8436c29 100644 --- a/drivers/painter/st77xx/qp_st7789.c +++ b/drivers/painter/st77xx/qp_st7789.c @@ -90,12 +90,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t st7789_driver_vtable = { .flush = qp_tft_panel_flush, .pixdata = qp_tft_panel_pixdata, .viewport = qp_tft_panel_viewport, - .palette_convert = qp_tft_panel_palette_convert, - .append_pixels = qp_tft_panel_append_pixels, + .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, + .append_pixels = qp_tft_panel_append_pixels_rgb565, }, - .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped, - .num_window_bytes = 2, - .swap_window_coords = false, + .num_window_bytes = 2, + .swap_window_coords = false, .opcodes = { .display_on = ST77XX_CMD_DISPLAY_ON, diff --git a/drivers/painter/tft_panel/qp_tft_panel.c b/drivers/painter/tft_panel/qp_tft_panel.c index 4d636c9509..ad83b6c792 100644 --- a/drivers/painter/tft_panel/qp_tft_panel.c +++ b/drivers/painter/tft_panel/qp_tft_panel.c @@ -10,29 +10,6 @@ #define BYTE_SWAP(x) (((((uint16_t)(x)) >> 8) & 0x00FF) | ((((uint16_t)(x)) << 8) & 0xFF00)) //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// Native pixel format conversion - -uint16_t qp_rgb888_to_rgb565(uint8_t r, uint8_t g, uint8_t b) { - uint16_t rgb565 = (((uint16_t)r) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)b) >> 3); - return rgb565; -} - -uint16_t qp_rgb888_to_rgb565_swapped(uint8_t r, uint8_t g, uint8_t b) { - uint16_t rgb565 = (((uint16_t)r) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)b) >> 3); - return BYTE_SWAP(rgb565); -} - -uint16_t qp_rgb888_to_bgr565(uint8_t r, uint8_t g, uint8_t b) { - uint16_t bgr565 = (((uint16_t)b) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)r) >> 3); - return bgr565; -} - -uint16_t qp_rgb888_to_bgr565_swapped(uint8_t r, uint8_t g, uint8_t b) { - uint16_t bgr565 = (((uint16_t)b) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)r) >> 3); - return BYTE_SWAP(bgr565); -} - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Quantum Painter API implementations // Power control @@ -105,26 +82,49 @@ bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top, // Stream pixel data to the current write position in GRAM bool qp_tft_panel_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) { - qp_comms_send(device, pixel_data, native_pixel_count * sizeof(uint16_t)); + struct painter_driver_t *driver = (struct painter_driver_t *)device; + qp_comms_send(device, pixel_data, native_pixel_count * driver->native_bits_per_pixel / 8); return true; } +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Convert supplied palette entries into their native equivalents -bool qp_tft_panel_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) { - struct painter_driver_t * driver = (struct painter_driver_t *)device; - struct tft_panel_dc_reset_painter_driver_vtable_t *vtable = (struct tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable; + +bool qp_tft_panel_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) { for (int16_t i = 0; i < palette_size; ++i) { - RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v}); - palette[i].rgb565 = vtable->rgb888_to_native16bit(rgb.r, rgb.g, rgb.b); + RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v}); + uint16_t rgb565 = (((uint16_t)rgb.r) >> 3) << 11 | (((uint16_t)rgb.g) >> 2) << 5 | (((uint16_t)rgb.b) >> 3); + palette[i].rgb565 = BYTE_SWAP(rgb565); } return true; } +bool qp_tft_panel_palette_convert_rgb888(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) { + for (int16_t i = 0; i < palette_size; ++i) { + RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v}); + palette[i].rgb888.r = rgb.r; + palette[i].rgb888.g = rgb.g; + palette[i].rgb888.b = rgb.b; + } + return true; +} + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Append pixels to the target location, keyed by the pixel index -bool qp_tft_panel_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) { + +bool qp_tft_panel_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) { uint16_t *buf = (uint16_t *)target_buffer; for (uint32_t i = 0; i < pixel_count; ++i) { buf[pixel_offset + i] = palette[palette_indices[i]].rgb565; } return true; } + +bool qp_tft_panel_append_pixels_rgb888(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) { + for (uint32_t i = 0; i < pixel_count; ++i) { + target_buffer[(pixel_offset + i) * 3 + 0] = palette[palette_indices[i]].rgb888.r; + target_buffer[(pixel_offset + i) * 3 + 1] = palette[palette_indices[i]].rgb888.g; + target_buffer[(pixel_offset + i) * 3 + 2] = palette[palette_indices[i]].rgb888.b; + } + return true; +} diff --git a/drivers/painter/tft_panel/qp_tft_panel.h b/drivers/painter/tft_panel/qp_tft_panel.h index 6eddfc503d..3cb015891b 100644 --- a/drivers/painter/tft_panel/qp_tft_panel.h +++ b/drivers/painter/tft_panel/qp_tft_panel.h @@ -11,15 +11,10 @@ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Common TFT panel implementation using D/C, and RST pins. -typedef uint16_t (*rgb888_to_native_uint16_t)(uint8_t r, uint8_t g, uint8_t b); - // Driver vtable with extras struct tft_panel_dc_reset_painter_driver_vtable_t { struct painter_driver_vtable_t base; // must be first, so it can be cast to/from the painter_driver_vtable_t* type - // Conversion function for palette entries - rgb888_to_native_uint16_t rgb888_to_native16bit; - // Number of bytes for transmitting x/y coordinates uint8_t num_window_bytes; @@ -58,10 +53,9 @@ bool qp_tft_panel_clear(painter_device_t device); bool qp_tft_panel_flush(painter_device_t device); bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom); bool qp_tft_panel_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count); -bool qp_tft_panel_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette); -bool qp_tft_panel_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices); -uint16_t qp_rgb888_to_rgb565(uint8_t r, uint8_t g, uint8_t b); -uint16_t qp_rgb888_to_rgb565_swapped(uint8_t r, uint8_t g, uint8_t b); -uint16_t qp_rgb888_to_bgr565(uint8_t r, uint8_t g, uint8_t b); -uint16_t qp_rgb888_to_bgr565_swapped(uint8_t r, uint8_t g, uint8_t b); +bool qp_tft_panel_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette); +bool qp_tft_panel_palette_convert_rgb888(painter_device_t device, int16_t palette_size, qp_pixel_t *palette); + +bool qp_tft_panel_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices); +bool qp_tft_panel_append_pixels_rgb888(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices); |