summaryrefslogtreecommitdiff
path: root/drivers/led
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/led')
-rw-r--r--drivers/led/apa102.c10
-rw-r--r--drivers/led/apa102.h2
-rw-r--r--drivers/led/aw20216.c168
-rw-r--r--drivers/led/aw20216s.c168
-rw-r--r--drivers/led/aw20216s.h (renamed from drivers/led/aw20216.h)47
-rw-r--r--drivers/led/ckled2001-simple.c89
-rw-r--r--drivers/led/ckled2001-simple.h181
-rw-r--r--drivers/led/ckled2001.c89
-rw-r--r--drivers/led/ckled2001.h181
-rw-r--r--drivers/led/issi/is31fl3218-simple.c143
-rw-r--r--drivers/led/issi/is31fl3218-simple.h60
-rw-r--r--drivers/led/issi/is31fl3218.c118
-rw-r--r--drivers/led/issi/is31fl3218.h38
-rw-r--r--drivers/led/issi/is31fl3731-simple.c115
-rw-r--r--drivers/led/issi/is31fl3731-simple.h21
-rw-r--r--drivers/led/issi/is31fl3731.c106
-rw-r--r--drivers/led/issi/is31fl3731.h21
-rw-r--r--drivers/led/issi/is31fl3733-simple.c132
-rw-r--r--drivers/led/issi/is31fl3733-simple.h70
-rw-r--r--drivers/led/issi/is31fl3733.c129
-rw-r--r--drivers/led/issi/is31fl3733.h69
-rw-r--r--drivers/led/issi/is31fl3736-simple.c222
-rw-r--r--drivers/led/issi/is31fl3736-simple.h215
-rw-r--r--drivers/led/issi/is31fl3736.c175
-rw-r--r--drivers/led/issi/is31fl3736.h79
-rw-r--r--drivers/led/issi/is31fl3737.c125
-rw-r--r--drivers/led/issi/is31fl3737.h61
-rw-r--r--drivers/led/issi/is31fl3741.c143
-rw-r--r--drivers/led/issi/is31fl3741.h59
-rw-r--r--drivers/led/issi/is31flcommon.h8
30 files changed, 2000 insertions, 1044 deletions
diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c
index 766d8cd2eb..527519eb8a 100644
--- a/drivers/led/apa102.c
+++ b/drivers/led/apa102.c
@@ -24,7 +24,7 @@
# elif defined(PROTOCOL_CHIBIOS)
# include "hal.h"
# include "chibios_config.h"
-# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103)
+# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103) || defined(MCU_RP)
# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns
# else
# error APA102_NOPS configuration required
@@ -61,18 +61,18 @@ void static apa102_end_frame(uint16_t num_leds);
void static apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t brightness);
void static apa102_send_byte(uint8_t byte);
-void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) {
- LED_TYPE *end = start_led + num_leds;
+void apa102_setleds(rgb_led_t *start_led, uint16_t num_leds) {
+ rgb_led_t *end = start_led + num_leds;
apa102_start_frame();
- for (LED_TYPE *led = start_led; led < end; led++) {
+ for (rgb_led_t *led = start_led; led < end; led++) {
apa102_send_frame(led->r, led->g, led->b, apa102_led_brightness);
}
apa102_end_frame(num_leds);
}
// Overwrite the default rgblight_call_driver to use apa102 driver
-void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) {
+void rgblight_call_driver(rgb_led_t *start_led, uint8_t num_leds) {
apa102_setleds(start_led, num_leds);
}
diff --git a/drivers/led/apa102.h b/drivers/led/apa102.h
index 58cf020c1e..cd0a19d445 100644
--- a/drivers/led/apa102.h
+++ b/drivers/led/apa102.h
@@ -37,5 +37,5 @@ extern uint8_t apa102_led_brightness;
* - Set the data-out pin as output
* - Send out the LED data
*/
-void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds);
+void apa102_setleds(rgb_led_t *start_led, uint16_t num_leds);
void apa102_set_brightness(uint8_t brightness);
diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c
deleted file mode 100644
index 479643add4..0000000000
--- a/drivers/led/aw20216.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* Copyright 2021 Jasper Chan
- * 2023 Huckies <https://github.com/Huckies>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "aw20216.h"
-#include "wait.h"
-#include "spi_master.h"
-
-/* The AW20216 appears to be somewhat similar to the IS31FL743, although quite
- * a few things are different, such as the command byte format and page ordering.
- * The LED addresses start from 0x00 instead of 0x01.
- */
-#define AWINIC_ID 0b1010 << 4
-
-#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers
-#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control
-#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control
-#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice?
-#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control?
-
-#define AW_WRITE 0
-#define AW_READ 1
-
-#define AW_REG_CONFIGURATION 0x00 // PG0
-#define AW_REG_GLOBALCURRENT 0x01 // PG0
-#define AW_REG_RESET 0x2F // PG0
-#define AW_REG_MIXFUNCTION 0x46 // PG0
-
-// Default value of AW_REG_CONFIGURATION
-// D7:D4 = 1011, SWSEL (SW1~SW12 active)
-// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter)
-// D2:D1 = 00, OSDE (open/short detection enable)
-// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high)
-#define AW_CONFIG_DEFAULT 0b10110000
-#define AW_MIXCR_DEFAULT 0b00000000
-#define AW_RESET_CMD 0xAE
-#define AW_CHIPEN 1
-#define AW_LPEN (0x01 << 1)
-
-#define AW_PWM_REGISTER_COUNT 216
-
-#ifndef AW_SCALING_MAX
-# define AW_SCALING_MAX 150
-#endif
-
-#ifndef AW_GLOBAL_CURRENT_MAX
-# define AW_GLOBAL_CURRENT_MAX 150
-#endif
-
-#ifndef AW_SPI_MODE
-# define AW_SPI_MODE 0
-#endif
-
-#ifndef AW_SPI_DIVISOR
-# define AW_SPI_DIVISOR 4
-#endif
-
-uint8_t g_pwm_buffer[DRIVER_COUNT][AW_PWM_REGISTER_COUNT];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
-
-bool aw20216_write(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t* data, uint8_t len) {
- static uint8_t s_spi_transfer_buffer[2] = {0};
-
- if (!spi_start(cs_pin, false, AW_SPI_MODE, AW_SPI_DIVISOR)) {
- spi_stop();
- return false;
- }
-
- s_spi_transfer_buffer[0] = (AWINIC_ID | page | AW_WRITE);
- s_spi_transfer_buffer[1] = reg;
-
- if (spi_transmit(s_spi_transfer_buffer, 2) != SPI_STATUS_SUCCESS) {
- spi_stop();
- return false;
- }
-
- if (spi_transmit(data, len) != SPI_STATUS_SUCCESS) {
- spi_stop();
- return false;
- }
-
- spi_stop();
- return true;
-}
-
-static inline bool aw20216_write_register(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t value) {
- // Little wrapper so callers need not care about sending a buffer
- return aw20216_write(cs_pin, page, reg, &value, 1);
-}
-
-void aw20216_soft_reset(pin_t cs_pin) {
- aw20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_RESET, AW_RESET_CMD);
-}
-
-static void aw20216_init_scaling(pin_t cs_pin) {
- // Set constant current to the max, control brightness with PWM
- for (uint8_t i = 0; i < AW_PWM_REGISTER_COUNT; i++) {
- aw20216_write_register(cs_pin, AW_PAGE_SCALING, i, AW_SCALING_MAX);
- }
-}
-
-static inline void aw20216_init_current_limit(pin_t cs_pin) {
- // Push config
- aw20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_GLOBALCURRENT, AW_GLOBAL_CURRENT_MAX);
-}
-
-static inline void aw20216_soft_enable(pin_t cs_pin) {
- // Push config
- aw20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN);
-}
-
-static inline void aw20216_auto_lowpower(pin_t cs_pin) {
- aw20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_MIXFUNCTION, AW_MIXCR_DEFAULT | AW_LPEN);
-}
-
-void aw20216_init(pin_t cs_pin, pin_t en_pin) {
- setPinOutput(en_pin);
- writePinHigh(en_pin);
-
- aw20216_soft_reset(cs_pin);
- wait_ms(2);
-
- // Drivers should start with all scaling and PWM registers as off
- aw20216_init_current_limit(cs_pin);
- aw20216_init_scaling(cs_pin);
-
- aw20216_soft_enable(cs_pin);
- aw20216_auto_lowpower(cs_pin);
-}
-
-void aw20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
- aw_led led;
- memcpy_P(&led, (&g_aw_leds[index]), sizeof(led));
-
- if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) {
- return;
- }
- g_pwm_buffer[led.driver][led.r] = red;
- g_pwm_buffer[led.driver][led.g] = green;
- g_pwm_buffer[led.driver][led.b] = blue;
- g_pwm_buffer_update_required[led.driver] = true;
-}
-
-void aw20216_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
- for (uint8_t i = 0; i < RGB_MATRIX_LED_COUNT; i++) {
- aw20216_set_color(i, red, green, blue);
- }
-}
-
-void aw20216_update_pwm_buffers(pin_t cs_pin, uint8_t index) {
- if (g_pwm_buffer_update_required[index]) {
- aw20216_write(cs_pin, AW_PAGE_PWM, 0, g_pwm_buffer[index], AW_PWM_REGISTER_COUNT);
- }
- g_pwm_buffer_update_required[index] = false;
-}
diff --git a/drivers/led/aw20216s.c b/drivers/led/aw20216s.c
new file mode 100644
index 0000000000..078a694d30
--- /dev/null
+++ b/drivers/led/aw20216s.c
@@ -0,0 +1,168 @@
+/* Copyright 2021 Jasper Chan
+ * 2023 Huckies <https://github.com/Huckies>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aw20216s.h"
+#include "wait.h"
+#include "spi_master.h"
+
+/* The AW20216S appears to be somewhat similar to the IS31FL743, although quite
+ * a few things are different, such as the command byte format and page ordering.
+ * The LED addresses start from 0x00 instead of 0x01.
+ */
+#define AW20216S_ID 0b1010 << 4
+
+#define AW20216S_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers
+#define AW20216S_PAGE_PWM 0x01 << 1 // PG1, LED PWM control
+#define AW20216S_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control
+#define AW20216S_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice?
+#define AW20216S_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control?
+
+#define AW20216S_WRITE 0
+#define AW20216S_READ 1
+
+#define AW20216S_REG_CONFIGURATION 0x00 // PG0
+#define AW20216S_REG_GLOBALCURRENT 0x01 // PG0
+#define AW20216S_REG_RESET 0x2F // PG0
+#define AW20216S_REG_MIXFUNCTION 0x46 // PG0
+
+// Default value of AW20216S_REG_CONFIGURATION
+// D7:D4 = 1011, SWSEL (SW1~SW12 active)
+// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter)
+// D2:D1 = 00, OSDE (open/short detection enable)
+// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high)
+#define AW20216S_CONFIG_DEFAULT 0b10110000
+#define AW20216S_MIXCR_DEFAULT 0b00000000
+#define AW20216S_RESET_CMD 0xAE
+#define AW20216S_CHIPEN 1
+#define AW20216S_LPEN (0x01 << 1)
+
+#define AW20216S_PWM_REGISTER_COUNT 216
+
+#ifndef AW20216S_SCALING_MAX
+# define AW20216S_SCALING_MAX 150
+#endif
+
+#ifndef AW20216S_GLOBAL_CURRENT_MAX
+# define AW20216S_GLOBAL_CURRENT_MAX 150
+#endif
+
+#ifndef AW20216S_SPI_MODE
+# define AW20216S_SPI_MODE 0
+#endif
+
+#ifndef AW20216S_SPI_DIVISOR
+# define AW20216S_SPI_DIVISOR 4
+#endif
+
+uint8_t g_pwm_buffer[AW20216S_DRIVER_COUNT][AW20216S_PWM_REGISTER_COUNT];
+bool g_pwm_buffer_update_required[AW20216S_DRIVER_COUNT] = {false};
+
+bool aw20216s_write(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t* data, uint8_t len) {
+ static uint8_t s_spi_transfer_buffer[2] = {0};
+
+ if (!spi_start(cs_pin, false, AW20216S_SPI_MODE, AW20216S_SPI_DIVISOR)) {
+ spi_stop();
+ return false;
+ }
+
+ s_spi_transfer_buffer[0] = (AW20216S_ID | page | AW20216S_WRITE);
+ s_spi_transfer_buffer[1] = reg;
+
+ if (spi_transmit(s_spi_transfer_buffer, 2) != SPI_STATUS_SUCCESS) {
+ spi_stop();
+ return false;
+ }
+
+ if (spi_transmit(data, len) != SPI_STATUS_SUCCESS) {
+ spi_stop();
+ return false;
+ }
+
+ spi_stop();
+ return true;
+}
+
+static inline bool aw20216s_write_register(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t value) {
+ // Little wrapper so callers need not care about sending a buffer
+ return aw20216s_write(cs_pin, page, reg, &value, 1);
+}
+
+void aw20216s_soft_reset(pin_t cs_pin) {
+ aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_RESET, AW20216S_RESET_CMD);
+}
+
+static void aw20216s_init_scaling(pin_t cs_pin) {
+ // Set constant current to the max, control brightness with PWM
+ for (uint8_t i = 0; i < AW20216S_PWM_REGISTER_COUNT; i++) {
+ aw20216s_write_register(cs_pin, AW20216S_PAGE_SCALING, i, AW20216S_SCALING_MAX);
+ }
+}
+
+static inline void aw20216s_init_current_limit(pin_t cs_pin) {
+ // Push config
+ aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_GLOBALCURRENT, AW20216S_GLOBAL_CURRENT_MAX);
+}
+
+static inline void aw20216s_soft_enable(pin_t cs_pin) {
+ // Push config
+ aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_CONFIGURATION, AW20216S_CONFIG_DEFAULT | AW20216S_CHIPEN);
+}
+
+static inline void aw20216s_auto_lowpower(pin_t cs_pin) {
+ aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_MIXFUNCTION, AW20216S_MIXCR_DEFAULT | AW20216S_LPEN);
+}
+
+void aw20216s_init(pin_t cs_pin, pin_t en_pin) {
+ setPinOutput(en_pin);
+ writePinHigh(en_pin);
+
+ aw20216s_soft_reset(cs_pin);
+ wait_ms(2);
+
+ // Drivers should start with all scaling and PWM registers as off
+ aw20216s_init_current_limit(cs_pin);
+ aw20216s_init_scaling(cs_pin);
+
+ aw20216s_soft_enable(cs_pin);
+ aw20216s_auto_lowpower(cs_pin);
+}
+
+void aw20216s_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+ aw20216s_led_t led;
+ memcpy_P(&led, (&g_aw20216s_leds[index]), sizeof(led));
+
+ if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) {
+ return;
+ }
+ g_pwm_buffer[led.driver][led.r] = red;
+ g_pwm_buffer[led.driver][led.g] = green;
+ g_pwm_buffer[led.driver][led.b] = blue;
+ g_pwm_buffer_update_required[led.driver] = true;
+}
+
+void aw20216s_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+ for (uint8_t i = 0; i < RGB_MATRIX_LED_COUNT; i++) {
+ aw20216s_set_color(i, red, green, blue);
+ }
+}
+
+void aw20216s_update_pwm_buffers(pin_t cs_pin, uint8_t index) {
+ if (g_pwm_buffer_update_required[index]) {
+ aw20216s_write(cs_pin, AW20216S_PAGE_PWM, 0, g_pwm_buffer[index], AW20216S_PWM_REGISTER_COUNT);
+ }
+ g_pwm_buffer_update_required[index] = false;
+}
diff --git a/drivers/led/aw20216.h b/drivers/led/aw20216s.h
index e342cb6bac..e8f1e0344f 100644
--- a/drivers/led/aw20216.h
+++ b/drivers/led/aw20216s.h
@@ -21,19 +21,52 @@
#include "progmem.h"
#include "gpio.h"
-typedef struct aw_led {
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define AW20216S_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef AW_SCALING_MAX
+# define AW20216S_SCALING_MAX AW_SCALING_MAX
+#endif
+#ifdef AW_GLOBAL_CURRENT_MAX
+# define AW20216S_GLOBAL_CURRENT_MAX AW_GLOBAL_CURRENT_MAX
+#endif
+#ifdef AW_SPI_MODE
+# define AW20216S_SPI_MODE AW_SPI_MODE
+#endif
+#ifdef AW_SPI_DIVISOR
+# define AW20216S_SPI_DIVISOR AW_SPI_DIVISOR
+#endif
+#ifdef DRIVER_1_CS
+# define AW20216S_DRIVER_1_CS DRIVER_1_CS
+#endif
+#ifdef DRIVER_2_CS
+# define AW20216S_DRIVER_2_CS DRIVER_2_CS
+#endif
+#ifdef DRIVER_1_EN
+# define AW20216S_DRIVER_1_EN DRIVER_1_EN
+#endif
+#ifdef DRIVER_2_EN
+# define AW20216S_DRIVER_2_EN DRIVER_2_EN
+#endif
+
+#define aw_led aw20216s_led_t
+#define g_aw_leds g_aw20216s_leds
+// ========
+
+typedef struct aw20216s_led_t {
uint8_t driver : 2;
uint8_t r;
uint8_t g;
uint8_t b;
-} aw_led;
+} aw20216s_led_t;
-extern const aw_led PROGMEM g_aw_leds[RGB_MATRIX_LED_COUNT];
+extern const aw20216s_led_t PROGMEM g_aw20216s_leds[RGB_MATRIX_LED_COUNT];
-void aw20216_init(pin_t cs_pin, pin_t en_pin);
-void aw20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
-void aw20216_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
-void aw20216_update_pwm_buffers(pin_t cs_pin, uint8_t index);
+void aw20216s_init(pin_t cs_pin, pin_t en_pin);
+void aw20216s_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void aw20216s_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+void aw20216s_update_pwm_buffers(pin_t cs_pin, uint8_t index);
#define CS1_SW1 0x00
#define CS2_SW1 0x01
diff --git a/drivers/led/ckled2001-simple.c b/drivers/led/ckled2001-simple.c
index c4d4c0a4cc..936b915af8 100644
--- a/drivers/led/ckled2001-simple.c
+++ b/drivers/led/ckled2001-simple.c
@@ -16,18 +16,17 @@
#include "ckled2001-simple.h"
#include "i2c_master.h"
-#include "wait.h"
-#ifndef CKLED2001_TIMEOUT
-# define CKLED2001_TIMEOUT 100
+#ifndef CKLED2001_I2C_TIMEOUT
+# define CKLED2001_I2C_TIMEOUT 100
#endif
-#ifndef CKLED2001_PERSISTENCE
-# define CKLED2001_PERSISTENCE 0
+#ifndef CKLED2001_I2C_PERSISTENCE
+# define CKLED2001_I2C_PERSISTENCE 0
#endif
-#ifndef PHASE_CHANNEL
-# define PHASE_CHANNEL MSKPHASE_12CHANNEL
+#ifndef CKLED2001_PHASE_CHANNEL
+# define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_12CHANNEL
#endif
#ifndef CKLED2001_CURRENT_TUNE
@@ -44,25 +43,25 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in ckled2001_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[CKLED2001_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[CKLED2001_DRIVER_COUNT] = {false};
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0};
-bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[CKLED2001_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[CKLED2001_DRIVER_COUNT] = {false};
bool ckled2001_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if CKLED2001_PERSISTENCE > 0
- for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) {
+#if CKLED2001_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < CKLED2001_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -85,14 +84,14 @@ bool ckled2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
-#if CKLED2001_PERSISTENCE > 0
- for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) {
+#if CKLED2001_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < CKLED2001_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -102,48 +101,48 @@ bool ckled2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
void ckled2001_init(uint8_t addr) {
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to shutdown mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_SHUT_DOWN_MODE);
// Setting internal channel pulldown/pullup
- ckled2001_write_register(addr, PDU_REG, MSKSET_CA_CB_CHANNEL);
+ ckled2001_write_register(addr, CKLED2001_REG_PDU, CKLED2001_MSKSET_CA_CB_CHANNEL);
// Select number of scan phase
- ckled2001_write_register(addr, SCAN_PHASE_REG, PHASE_CHANNEL);
+ ckled2001_write_register(addr, CKLED2001_REG_SCAN_PHASE, CKLED2001_PHASE_CHANNEL);
// Setting PWM Delay Phase
- ckled2001_write_register(addr, SLEW_RATE_CONTROL_MODE1_REG, MSKPWM_DELAY_PHASE_ENABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SLEW_RATE_CONTROL_MODE1, CKLED2001_MSKPWM_DELAY_PHASE_ENABLE);
// Setting Driving/Sinking Channel Slew Rate
- ckled2001_write_register(addr, SLEW_RATE_CONTROL_MODE2_REG, MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SLEW_RATE_CONTROL_MODE2, CKLED2001_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE);
// Setting Iref
- ckled2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_DISABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SOFTWARE_SLEEP, CKLED2001_MSKSLEEP_DISABLE);
// Set LED CONTROL PAGE (Page 0)
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE);
- for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) {
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_CONTROL_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CONTROL_ON_OFF_LENGTH; i++) {
ckled2001_write_register(addr, i, 0x00);
}
// Set PWM PAGE (Page 1)
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE);
- for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) {
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_PWM_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CURRENT_TUNE_LENGTH; i++) {
ckled2001_write_register(addr, i, 0x00);
}
// Set CURRENT PAGE (Page 4)
- uint8_t current_tuen_reg_list[LED_CURRENT_TUNE_LENGTH] = CKLED2001_CURRENT_TUNE;
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE);
- for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) {
- ckled2001_write_register(addr, i, current_tuen_reg_list[i]);
+ uint8_t current_tune_reg_list[CKLED2001_LED_CURRENT_TUNE_LENGTH] = CKLED2001_CURRENT_TUNE;
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_CURRENT_TUNE_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CURRENT_TUNE_LENGTH; i++) {
+ ckled2001_write_register(addr, i, current_tune_reg_list[i]);
}
// Enable LEDs ON/OFF
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE);
- for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) {
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_CONTROL_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CONTROL_ON_OFF_LENGTH; i++) {
ckled2001_write_register(addr, i, 0xFF);
}
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to normal mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_NORMAL_MODE);
}
void ckled2001_set_value(int index, uint8_t value) {
@@ -183,7 +182,7 @@ void ckled2001_set_led_control_register(uint8_t index, bool value) {
void ckled2001_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_PWM_PAGE);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@@ -196,7 +195,7 @@ void ckled2001_update_pwm_buffers(uint8_t addr, uint8_t index) {
void ckled2001_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_CONTROL_PAGE);
for (int i = 0; i < 24; i++) {
ckled2001_write_register(addr, i, g_led_control_registers[index][i]);
}
@@ -206,16 +205,16 @@ void ckled2001_update_led_control_registers(uint8_t addr, uint8_t index) {
void ckled2001_sw_return_normal(uint8_t addr) {
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to normal mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_NORMAL_MODE);
}
void ckled2001_sw_shutdown(uint8_t addr) {
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to shutdown mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_SHUT_DOWN_MODE);
// Write SW Sleep Register
- ckled2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_ENABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SOFTWARE_SLEEP, CKLED2001_MSKSLEEP_ENABLE);
}
diff --git a/drivers/led/ckled2001-simple.h b/drivers/led/ckled2001-simple.h
index c94df62dd2..1080da34c2 100644
--- a/drivers/led/ckled2001-simple.h
+++ b/drivers/led/ckled2001-simple.h
@@ -20,6 +20,39 @@
#include <stdbool.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define CKLED2001_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef CKLED2001_TIMEOUT
+# define CKLED2001_I2C_TIMEOUT CKLED2001_TIMEOUT
+#endif
+#ifdef CKLED2001_PERSISTENCE
+# define CKLED2001_I2C_PERSISTENCE CKLED2001_PERSISTENCE
+#endif
+#ifdef PHASE_CHANNEL
+# define CKLED2001_PHASE_CHANNEL PHASE_CHANNEL
+#endif
+
+#define MSKPHASE_12CHANNEL CKLED2001_MSKPHASE_12CHANNEL
+#define MSKPHASE_11CHANNEL CKLED2001_MSKPHASE_11CHANNEL
+#define MSKPHASE_10CHANNEL CKLED2001_MSKPHASE_10CHANNEL
+#define MSKPHASE_9CHANNEL CKLED2001_MSKPHASE_9CHANNEL
+#define MSKPHASE_8CHANNEL CKLED2001_MSKPHASE_8CHANNEL
+#define MSKPHASE_7CHANNEL CKLED2001_MSKPHASE_7CHANNEL
+#define MSKPHASE_6CHANNEL CKLED2001_MSKPHASE_6CHANNEL
+#define MSKPHASE_5CHANNEL CKLED2001_MSKPHASE_5CHANNEL
+#define MSKPHASE_4CHANNEL CKLED2001_MSKPHASE_4CHANNEL
+#define MSKPHASE_3CHANNEL CKLED2001_MSKPHASE_3CHANNEL
+#define MSKPHASE_2CHANNEL CKLED2001_MSKPHASE_2CHANNEL
+#define MSKPHASE_1CHANNEL CKLED2001_MSKPHASE_1CHANNEL
+// ========
+
+#define CKLED2001_I2C_ADDRESS_GND 0x74
+#define CKLED2001_I2C_ADDRESS_SCL 0x75
+#define CKLED2001_I2C_ADDRESS_SDA 0x76
+#define CKLED2001_I2C_ADDRESS_VDDIO 0x77
+
typedef struct ckled2001_led {
uint8_t driver : 2;
uint8_t v;
@@ -47,90 +80,90 @@ void ckled2001_sw_return_normal(uint8_t addr);
void ckled2001_sw_shutdown(uint8_t addr);
// Registers Page Define
-#define CONFIGURE_CMD_PAGE 0xFD
-#define LED_CONTROL_PAGE 0x00
-#define LED_PWM_PAGE 0x01
-#define FUNCTION_PAGE 0x03
-#define CURRENT_TUNE_PAGE 0x04
+#define CKLED2001_REG_CONFIGURE_CMD_PAGE 0xFD
+#define CKLED2001_LED_CONTROL_PAGE 0x00
+#define CKLED2001_LED_PWM_PAGE 0x01
+#define CKLED2001_FUNCTION_PAGE 0x03
+#define CKLED2001_CURRENT_TUNE_PAGE 0x04
// Function Register: address 0x00
-#define CONFIGURATION_REG 0x00
-#define MSKSW_SHUT_DOWN_MODE (0x0 << 0)
-#define MSKSW_NORMAL_MODE (0x1 << 0)
-
-#define DRIVER_ID_REG 0x11
-#define CKLED2001_ID 0x8A
-
-#define PDU_REG 0x13
-#define MSKSET_CA_CB_CHANNEL 0xAA
-#define MSKCLR_CA_CB_CHANNEL 0x00
-
-#define SCAN_PHASE_REG 0x14
-#define MSKPHASE_12CHANNEL 0x00
-#define MSKPHASE_11CHANNEL 0x01
-#define MSKPHASE_10CHANNEL 0x02
-#define MSKPHASE_9CHANNEL 0x03
-#define MSKPHASE_8CHANNEL 0x04
-#define MSKPHASE_7CHANNEL 0x05
-#define MSKPHASE_6CHANNEL 0x06
-#define MSKPHASE_5CHANNEL 0x07
-#define MSKPHASE_4CHANNEL 0x08
-#define MSKPHASE_3CHANNEL 0x09
-#define MSKPHASE_2CHANNEL 0x0A
-#define MSKPHASE_1CHANNEL 0x0B
-
-#define SLEW_RATE_CONTROL_MODE1_REG 0x15
-#define MSKPWM_DELAY_PHASE_ENABLE 0x04
-#define MSKPWM_DELAY_PHASE_DISABLE 0x00
-
-#define SLEW_RATE_CONTROL_MODE2_REG 0x16
-#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE 0xC0
-#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_DISABLE 0x00
-
-#define OPEN_SHORT_ENABLE_REG 0x17
-#define MSKOPEN_DETECTION_ENABLE (0x01 << 7)
-#define MSKOPEN_DETECTION_DISABLE (0x00)
-
-#define MSKSHORT_DETECTION_ENABLE (0x01 << 6)
-#define MSKSHORT_DETECTION_DISABLE (0x00)
-
-#define OPEN_SHORT_DUTY_REG 0x18
-#define OPEN_SHORT_FLAG_REG 0x19
-
-#define MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7)
-#define MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00)
-
-#define MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6)
-#define MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00)
-
-#define SOFTWARE_SLEEP_REG 0x1A
-#define MSKSLEEP_ENABLE 0x02
-#define MSKSLEEP_DISABLE 0x00
+#define CKLED2001_REG_CONFIGURATION 0x00
+#define CKLED2001_MSKSW_SHUT_DOWN_MODE (0x0 << 0)
+#define CKLED2001_MSKSW_NORMAL_MODE (0x1 << 0)
+
+#define CKLED2001_REG_DRIVER_ID 0x11
+#define CKLED2001_DRIVER_ID 0x8A
+
+#define CKLED2001_REG_PDU 0x13
+#define CKLED2001_MSKSET_CA_CB_CHANNEL 0xAA
+#define CKLED2001_MSKCLR_CA_CB_CHANNEL 0x00
+
+#define CKLED2001_REG_SCAN_PHASE 0x14
+#define CKLED2001_MSKPHASE_12CHANNEL 0x00
+#define CKLED2001_MSKPHASE_11CHANNEL 0x01
+#define CKLED2001_MSKPHASE_10CHANNEL 0x02
+#define CKLED2001_MSKPHASE_9CHANNEL 0x03
+#define CKLED2001_MSKPHASE_8CHANNEL 0x04
+#define CKLED2001_MSKPHASE_7CHANNEL 0x05
+#define CKLED2001_MSKPHASE_6CHANNEL 0x06
+#define CKLED2001_MSKPHASE_5CHANNEL 0x07
+#define CKLED2001_MSKPHASE_4CHANNEL 0x08
+#define CKLED2001_MSKPHASE_3CHANNEL 0x09
+#define CKLED2001_MSKPHASE_2CHANNEL 0x0A
+#define CKLED2001_MSKPHASE_1CHANNEL 0x0B
+
+#define CKLED2001_REG_SLEW_RATE_CONTROL_MODE1 0x15
+#define CKLED2001_MSKPWM_DELAY_PHASE_ENABLE 0x04
+#define CKLED2001_MSKPWM_DELAY_PHASE_DISABLE 0x00
+
+#define CKLED2001_REG_SLEW_RATE_CONTROL_MODE2 0x16
+#define CKLED2001_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE 0xC0
+#define CKLED2001_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_DISABLE 0x00
+
+#define CKLED2001_REG_OPEN_SHORT_ENABLE 0x17
+#define CKLED2001_MSKOPEN_DETECTION_ENABLE (0x01 << 7)
+#define CKLED2001_MSKOPEN_DETECTION_DISABLE (0x00)
+
+#define CKLED2001_MSKSHORT_DETECTION_ENABLE (0x01 << 6)
+#define CKLED2001_MSKSHORT_DETECTION_DISABLE (0x00)
+
+#define CKLED2001_REG_OPEN_SHORT_DUTY 0x18
+#define CKLED2001_REG_OPEN_SHORT_FLAG 0x19
+
+#define CKLED2001_MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7)
+#define CKLED2001_MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00)
+
+#define CKLED2001_MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6)
+#define CKLED2001_MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00)
+
+#define CKLED2001_REG_SOFTWARE_SLEEP 0x1A
+#define CKLED2001_MSKSLEEP_ENABLE 0x02
+#define CKLED2001_MSKSLEEP_DISABLE 0x00
// LED Control Registers
-#define LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
-#define LED_CONTROL_ON_OFF_LAST_ADDR 0x17
-#define LED_CONTROL_ON_OFF_LENGTH ((LED_CONTROL_ON_OFF_LAST_ADDR - LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
+#define CKLED2001_LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
+#define CKLED2001_LED_CONTROL_ON_OFF_LAST_ADDR 0x17
+#define CKLED2001_LED_CONTROL_ON_OFF_LENGTH ((CKLED2001_LED_CONTROL_ON_OFF_LAST_ADDR - CKLED2001_LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
-#define LED_CONTROL_OPEN_FIRST_ADDR 0x18
-#define LED_CONTROL_OPEN_LAST_ADDR 0x2F
-#define LED_CONTROL_OPEN_LENGTH ((LED_CONTROL_OPEN_LAST_ADDR - LED_CONTROL_OPEN_FIRST_ADDR) + 1)
+#define CKLED2001_LED_CONTROL_OPEN_FIRST_ADDR 0x18
+#define CKLED2001_LED_CONTROL_OPEN_LAST_ADDR 0x2F
+#define CKLED2001_LED_CONTROL_OPEN_LENGTH ((CKLED2001_LED_CONTROL_OPEN_LAST_ADDR - CKLED2001_LED_CONTROL_OPEN_FIRST_ADDR) + 1)
-#define LED_CONTROL_SHORT_FIRST_ADDR 0x30
-#define LED_CONTROL_SHORT_LAST_ADDR 0x47
-#define LED_CONTROL_SHORT_LENGTH ((LED_CONTROL_SHORT_LAST_ADDR - LED_CONTROL_SHORT_FIRST_ADDR) + 1)
+#define CKLED2001_LED_CONTROL_SHORT_FIRST_ADDR 0x30
+#define CKLED2001_LED_CONTROL_SHORT_LAST_ADDR 0x47
+#define CKLED2001_LED_CONTROL_SHORT_LENGTH ((CKLED2001_LED_CONTROL_SHORT_LAST_ADDR - CKLED2001_LED_CONTROL_SHORT_FIRST_ADDR) + 1)
-#define LED_CONTROL_PAGE_LENGTH 0x48
+#define CKLED2001_LED_CONTROL_PAGE_LENGTH 0x48
// LED Control Registers
-#define LED_PWM_FIRST_ADDR 0x00
-#define LED_PWM_LAST_ADDR 0xBF
-#define LED_PWM_LENGTH 0xC0
+#define CKLED2001_LED_PWM_FIRST_ADDR 0x00
+#define CKLED2001_LED_PWM_LAST_ADDR 0xBF
+#define CKLED2001_LED_PWM_LENGTH 0xC0
// Current Tune Registers
-#define LED_CURRENT_TUNE_FIRST_ADDR 0x00
-#define LED_CURRENT_TUNE_LAST_ADDR 0x0B
-#define LED_CURRENT_TUNE_LENGTH 0x0C
+#define CKLED2001_LED_CURRENT_TUNE_FIRST_ADDR 0x00
+#define CKLED2001_LED_CURRENT_TUNE_LAST_ADDR 0x0B
+#define CKLED2001_LED_CURRENT_TUNE_LENGTH 0x0C
#define A_1 0x00
#define A_2 0x01
@@ -334,4 +367,4 @@ void ckled2001_sw_shutdown(uint8_t addr);
#define L_13 0xBC
#define L_14 0xBD
#define L_15 0xBE
-#define L_16 0xBF \ No newline at end of file
+#define L_16 0xBF
diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c
index 6ababf55e9..8340aae823 100644
--- a/drivers/led/ckled2001.c
+++ b/drivers/led/ckled2001.c
@@ -16,18 +16,17 @@
#include "ckled2001.h"
#include "i2c_master.h"
-#include "wait.h"
-#ifndef CKLED2001_TIMEOUT
-# define CKLED2001_TIMEOUT 100
+#ifndef CKLED2001_I2C_TIMEOUT
+# define CKLED2001_I2C_TIMEOUT 100
#endif
-#ifndef CKLED2001_PERSISTENCE
-# define CKLED2001_PERSISTENCE 0
+#ifndef CKLED2001_I2C_PERSISTENCE
+# define CKLED2001_I2C_PERSISTENCE 0
#endif
-#ifndef PHASE_CHANNEL
-# define PHASE_CHANNEL MSKPHASE_12CHANNEL
+#ifndef CKLED2001_PHASE_CHANNEL
+# define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_12CHANNEL
#endif
#ifndef CKLED2001_CURRENT_TUNE
@@ -44,25 +43,25 @@ uint8_t g_twi_transfer_buffer[65];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in ckled2001_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[CKLED2001_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[CKLED2001_DRIVER_COUNT] = {false};
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0};
-bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[CKLED2001_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[CKLED2001_DRIVER_COUNT] = {false};
bool ckled2001_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if CKLED2001_PERSISTENCE > 0
- for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) {
+#if CKLED2001_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < CKLED2001_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -84,14 +83,14 @@ bool ckled2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
-#if CKLED2001_PERSISTENCE > 0
- for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 65, CKLED2001_TIMEOUT) != 0) {
+#if CKLED2001_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < CKLED2001_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 65, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 65, CKLED2001_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 65, CKLED2001_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -101,48 +100,48 @@ bool ckled2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
void ckled2001_init(uint8_t addr) {
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to shutdown mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_SHUT_DOWN_MODE);
// Setting internal channel pulldown/pullup
- ckled2001_write_register(addr, PDU_REG, MSKSET_CA_CB_CHANNEL);
+ ckled2001_write_register(addr, CKLED2001_REG_PDU, CKLED2001_MSKSET_CA_CB_CHANNEL);
// Select number of scan phase
- ckled2001_write_register(addr, SCAN_PHASE_REG, PHASE_CHANNEL);
+ ckled2001_write_register(addr, CKLED2001_REG_SCAN_PHASE, CKLED2001_PHASE_CHANNEL);
// Setting PWM Delay Phase
- ckled2001_write_register(addr, SLEW_RATE_CONTROL_MODE1_REG, MSKPWM_DELAY_PHASE_ENABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SLEW_RATE_CONTROL_MODE1, CKLED2001_MSKPWM_DELAY_PHASE_ENABLE);
// Setting Driving/Sinking Channel Slew Rate
- ckled2001_write_register(addr, SLEW_RATE_CONTROL_MODE2_REG, MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SLEW_RATE_CONTROL_MODE2, CKLED2001_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE);
// Setting Iref
- ckled2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_DISABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SOFTWARE_SLEEP, CKLED2001_MSKSLEEP_DISABLE);
// Set LED CONTROL PAGE (Page 0)
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE);
- for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) {
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_CONTROL_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CONTROL_ON_OFF_LENGTH; i++) {
ckled2001_write_register(addr, i, 0x00);
}
// Set PWM PAGE (Page 1)
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE);
- for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) {
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_PWM_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CURRENT_TUNE_LENGTH; i++) {
ckled2001_write_register(addr, i, 0x00);
}
// Set CURRENT PAGE (Page 4)
- uint8_t current_tuen_reg_list[LED_CURRENT_TUNE_LENGTH] = CKLED2001_CURRENT_TUNE;
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE);
- for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) {
- ckled2001_write_register(addr, i, current_tuen_reg_list[i]);
+ uint8_t current_tune_reg_list[CKLED2001_LED_CURRENT_TUNE_LENGTH] = CKLED2001_CURRENT_TUNE;
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_CURRENT_TUNE_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CURRENT_TUNE_LENGTH; i++) {
+ ckled2001_write_register(addr, i, current_tune_reg_list[i]);
}
// Enable LEDs ON/OFF
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE);
- for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) {
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_CONTROL_PAGE);
+ for (int i = 0; i < CKLED2001_LED_CONTROL_ON_OFF_LENGTH; i++) {
ckled2001_write_register(addr, i, 0xFF);
}
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to normal mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_NORMAL_MODE);
}
void ckled2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
@@ -198,7 +197,7 @@ void ckled2001_set_led_control_register(uint8_t index, bool red, bool green, boo
void ckled2001_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_PWM_PAGE);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@@ -211,7 +210,7 @@ void ckled2001_update_pwm_buffers(uint8_t addr, uint8_t index) {
void ckled2001_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_LED_CONTROL_PAGE);
for (int i = 0; i < 24; i++) {
ckled2001_write_register(addr, i, g_led_control_registers[index][i]);
}
@@ -221,16 +220,16 @@ void ckled2001_update_led_control_registers(uint8_t addr, uint8_t index) {
void ckled2001_sw_return_normal(uint8_t addr) {
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to normal mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_NORMAL_MODE);
}
void ckled2001_sw_shutdown(uint8_t addr) {
// Select to function page
- ckled2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURE_CMD_PAGE, CKLED2001_FUNCTION_PAGE);
// Setting LED driver to shutdown mode
- ckled2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE);
+ ckled2001_write_register(addr, CKLED2001_REG_CONFIGURATION, CKLED2001_MSKSW_SHUT_DOWN_MODE);
// Write SW Sleep Register
- ckled2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_ENABLE);
+ ckled2001_write_register(addr, CKLED2001_REG_SOFTWARE_SLEEP, CKLED2001_MSKSLEEP_ENABLE);
}
diff --git a/drivers/led/ckled2001.h b/drivers/led/ckled2001.h
index 32da137fb7..257efbb6a1 100644
--- a/drivers/led/ckled2001.h
+++ b/drivers/led/ckled2001.h
@@ -20,6 +20,39 @@
#include <stdbool.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define CKLED2001_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef CKLED2001_TIMEOUT
+# define CKLED2001_I2C_TIMEOUT CKLED2001_TIMEOUT
+#endif
+#ifdef CKLED2001_PERSISTENCE
+# define CKLED2001_I2C_PERSISTENCE CKLED2001_PERSISTENCE
+#endif
+#ifdef PHASE_CHANNEL
+# define CKLED2001_PHASE_CHANNEL PHASE_CHANNEL
+#endif
+
+#define MSKPHASE_12CHANNEL CKLED2001_MSKPHASE_12CHANNEL
+#define MSKPHASE_11CHANNEL CKLED2001_MSKPHASE_11CHANNEL
+#define MSKPHASE_10CHANNEL CKLED2001_MSKPHASE_10CHANNEL
+#define MSKPHASE_9CHANNEL CKLED2001_MSKPHASE_9CHANNEL
+#define MSKPHASE_8CHANNEL CKLED2001_MSKPHASE_8CHANNEL
+#define MSKPHASE_7CHANNEL CKLED2001_MSKPHASE_7CHANNEL
+#define MSKPHASE_6CHANNEL CKLED2001_MSKPHASE_6CHANNEL
+#define MSKPHASE_5CHANNEL CKLED2001_MSKPHASE_5CHANNEL
+#define MSKPHASE_4CHANNEL CKLED2001_MSKPHASE_4CHANNEL
+#define MSKPHASE_3CHANNEL CKLED2001_MSKPHASE_3CHANNEL
+#define MSKPHASE_2CHANNEL CKLED2001_MSKPHASE_2CHANNEL
+#define MSKPHASE_1CHANNEL CKLED2001_MSKPHASE_1CHANNEL
+// ========
+
+#define CKLED2001_I2C_ADDRESS_GND 0x74
+#define CKLED2001_I2C_ADDRESS_SCL 0x75
+#define CKLED2001_I2C_ADDRESS_SDA 0x76
+#define CKLED2001_I2C_ADDRESS_VDDIO 0x77
+
typedef struct ckled2001_led {
uint8_t driver : 2;
uint8_t r;
@@ -49,90 +82,90 @@ void ckled2001_sw_return_normal(uint8_t addr);
void ckled2001_sw_shutdown(uint8_t addr);
// Registers Page Define
-#define CONFIGURE_CMD_PAGE 0xFD
-#define LED_CONTROL_PAGE 0x00
-#define LED_PWM_PAGE 0x01
-#define FUNCTION_PAGE 0x03
-#define CURRENT_TUNE_PAGE 0x04
+#define CKLED2001_REG_CONFIGURE_CMD_PAGE 0xFD
+#define CKLED2001_LED_CONTROL_PAGE 0x00
+#define CKLED2001_LED_PWM_PAGE 0x01
+#define CKLED2001_FUNCTION_PAGE 0x03
+#define CKLED2001_CURRENT_TUNE_PAGE 0x04
// Function Register: address 0x00
-#define CONFIGURATION_REG 0x00
-#define MSKSW_SHUT_DOWN_MODE (0x0 << 0)
-#define MSKSW_NORMAL_MODE (0x1 << 0)
-
-#define DRIVER_ID_REG 0x11
-#define CKLED2001_ID 0x8A
-
-#define PDU_REG 0x13
-#define MSKSET_CA_CB_CHANNEL 0xAA
-#define MSKCLR_CA_CB_CHANNEL 0x00
-
-#define SCAN_PHASE_REG 0x14
-#define MSKPHASE_12CHANNEL 0x00
-#define MSKPHASE_11CHANNEL 0x01
-#define MSKPHASE_10CHANNEL 0x02
-#define MSKPHASE_9CHANNEL 0x03
-#define MSKPHASE_8CHANNEL 0x04
-#define MSKPHASE_7CHANNEL 0x05
-#define MSKPHASE_6CHANNEL 0x06
-#define MSKPHASE_5CHANNEL 0x07
-#define MSKPHASE_4CHANNEL 0x08
-#define MSKPHASE_3CHANNEL 0x09
-#define MSKPHASE_2CHANNEL 0x0A
-#define MSKPHASE_1CHANNEL 0x0B
-
-#define SLEW_RATE_CONTROL_MODE1_REG 0x15
-#define MSKPWM_DELAY_PHASE_ENABLE 0x04
-#define MSKPWM_DELAY_PHASE_DISABLE 0x00
-
-#define SLEW_RATE_CONTROL_MODE2_REG 0x16
-#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE 0xC0
-#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_DISABLE 0x00
-
-#define OPEN_SHORT_ENABLE_REG 0x17
-#define MSKOPEN_DETECTION_ENABLE (0x01 << 7)
-#define MSKOPEN_DETECTION_DISABLE (0x00)
-
-#define MSKSHORT_DETECTION_ENABLE (0x01 << 6)
-#define MSKSHORT_DETECTION_DISABLE (0x00)
-
-#define OPEN_SHORT_DUTY_REG 0x18
-#define OPEN_SHORT_FLAG_REG 0x19
-
-#define MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7)
-#define MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00)
-
-#define MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6)
-#define MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00)
-
-#define SOFTWARE_SLEEP_REG 0x1A
-#define MSKSLEEP_ENABLE 0x02
-#define MSKSLEEP_DISABLE 0x00
+#define CKLED2001_REG_CONFIGURATION 0x00
+#define CKLED2001_MSKSW_SHUT_DOWN_MODE (0x0 << 0)
+#define CKLED2001_MSKSW_NORMAL_MODE (0x1 << 0)
+
+#define CKLED2001_REG_DRIVER_ID 0x11
+#define CKLED2001_DRIVER_ID 0x8A
+
+#define CKLED2001_REG_PDU 0x13
+#define CKLED2001_MSKSET_CA_CB_CHANNEL 0xAA
+#define CKLED2001_MSKCLR_CA_CB_CHANNEL 0x00
+
+#define CKLED2001_REG_SCAN_PHASE 0x14
+#define CKLED2001_MSKPHASE_12CHANNEL 0x00
+#define CKLED2001_MSKPHASE_11CHANNEL 0x01
+#define CKLED2001_MSKPHASE_10CHANNEL 0x02
+#define CKLED2001_MSKPHASE_9CHANNEL 0x03
+#define CKLED2001_MSKPHASE_8CHANNEL 0x04
+#define CKLED2001_MSKPHASE_7CHANNEL 0x05
+#define CKLED2001_MSKPHASE_6CHANNEL 0x06
+#define CKLED2001_MSKPHASE_5CHANNEL 0x07
+#define CKLED2001_MSKPHASE_4CHANNEL 0x08
+#define CKLED2001_MSKPHASE_3CHANNEL 0x09
+#define CKLED2001_MSKPHASE_2CHANNEL 0x0A
+#define CKLED2001_MSKPHASE_1CHANNEL 0x0B
+
+#define CKLED2001_REG_SLEW_RATE_CONTROL_MODE1 0x15
+#define CKLED2001_MSKPWM_DELAY_PHASE_ENABLE 0x04
+#define CKLED2001_MSKPWM_DELAY_PHASE_DISABLE 0x00
+
+#define CKLED2001_REG_SLEW_RATE_CONTROL_MODE2 0x16
+#define CKLED2001_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE 0xC0
+#define CKLED2001_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_DISABLE 0x00
+
+#define CKLED2001_REG_OPEN_SHORT_ENABLE 0x17
+#define CKLED2001_MSKOPEN_DETECTION_ENABLE (0x01 << 7)
+#define CKLED2001_MSKOPEN_DETECTION_DISABLE (0x00)
+
+#define CKLED2001_MSKSHORT_DETECTION_ENABLE (0x01 << 6)
+#define CKLED2001_MSKSHORT_DETECTION_DISABLE (0x00)
+
+#define CKLED2001_REG_OPEN_SHORT_DUTY 0x18
+#define CKLED2001_REG_OPEN_SHORT_FLAG 0x19
+
+#define CKLED2001_MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7)
+#define CKLED2001_MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00)
+
+#define CKLED2001_MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6)
+#define CKLED2001_MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00)
+
+#define CKLED2001_REG_SOFTWARE_SLEEP 0x1A
+#define CKLED2001_MSKSLEEP_ENABLE 0x02
+#define CKLED2001_MSKSLEEP_DISABLE 0x00
// LED Control Registers
-#define LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
-#define LED_CONTROL_ON_OFF_LAST_ADDR 0x17
-#define LED_CONTROL_ON_OFF_LENGTH ((LED_CONTROL_ON_OFF_LAST_ADDR - LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
+#define CKLED2001_LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
+#define CKLED2001_LED_CONTROL_ON_OFF_LAST_ADDR 0x17
+#define CKLED2001_LED_CONTROL_ON_OFF_LENGTH ((CKLED2001_LED_CONTROL_ON_OFF_LAST_ADDR - CKLED2001_LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
-#define LED_CONTROL_OPEN_FIRST_ADDR 0x18
-#define LED_CONTROL_OPEN_LAST_ADDR 0x2F
-#define LED_CONTROL_OPEN_LENGTH ((LED_CONTROL_OPEN_LAST_ADDR - LED_CONTROL_OPEN_FIRST_ADDR) + 1)
+#define CKLED2001_LED_CONTROL_OPEN_FIRST_ADDR 0x18
+#define CKLED2001_LED_CONTROL_OPEN_LAST_ADDR 0x2F
+#define CKLED2001_LED_CONTROL_OPEN_LENGTH ((CKLED2001_LED_CONTROL_OPEN_LAST_ADDR - CKLED2001_LED_CONTROL_OPEN_FIRST_ADDR) + 1)
-#define LED_CONTROL_SHORT_FIRST_ADDR 0x30
-#define LED_CONTROL_SHORT_LAST_ADDR 0x47
-#define LED_CONTROL_SHORT_LENGTH ((LED_CONTROL_SHORT_LAST_ADDR - LED_CONTROL_SHORT_FIRST_ADDR) + 1)
+#define CKLED2001_LED_CONTROL_SHORT_FIRST_ADDR 0x30
+#define CKLED2001_LED_CONTROL_SHORT_LAST_ADDR 0x47
+#define CKLED2001_LED_CONTROL_SHORT_LENGTH ((CKLED2001_LED_CONTROL_SHORT_LAST_ADDR - CKLED2001_LED_CONTROL_SHORT_FIRST_ADDR) + 1)
-#define LED_CONTROL_PAGE_LENGTH 0x48
+#define CKLED2001_LED_CONTROL_PAGE_LENGTH 0x48
// LED Control Registers
-#define LED_PWM_FIRST_ADDR 0x00
-#define LED_PWM_LAST_ADDR 0xBF
-#define LED_PWM_LENGTH 0xC0
+#define CKLED2001_LED_PWM_FIRST_ADDR 0x00
+#define CKLED2001_LED_PWM_LAST_ADDR 0xBF
+#define CKLED2001_LED_PWM_LENGTH 0xC0
// Current Tune Registers
-#define LED_CURRENT_TUNE_FIRST_ADDR 0x00
-#define LED_CURRENT_TUNE_LAST_ADDR 0x0B
-#define LED_CURRENT_TUNE_LENGTH 0x0C
+#define CKLED2001_LED_CURRENT_TUNE_FIRST_ADDR 0x00
+#define CKLED2001_LED_CURRENT_TUNE_LAST_ADDR 0x0B
+#define CKLED2001_LED_CURRENT_TUNE_LENGTH 0x0C
#define A_1 0x00
#define A_2 0x01
@@ -336,4 +369,4 @@ void ckled2001_sw_shutdown(uint8_t addr);
#define L_13 0xBC
#define L_14 0xBD
#define L_15 0xBE
-#define L_16 0xBF \ No newline at end of file
+#define L_16 0xBF
diff --git a/drivers/led/issi/is31fl3218-simple.c b/drivers/led/issi/is31fl3218-simple.c
new file mode 100644
index 0000000000..a78dedfcf1
--- /dev/null
+++ b/drivers/led/issi/is31fl3218-simple.c
@@ -0,0 +1,143 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "is31fl3218.h"
+#include <string.h>
+#include "i2c_master.h"
+
+// These are the register addresses
+#define IS31FL3218_REG_SHUTDOWN 0x00
+#define IS31FL3218_REG_PWM 0x01
+#define IS31FL3218_REG_CONTROL 0x13
+#define IS31FL3218_REG_UPDATE 0x16
+#define IS31FL3218_REG_RESET 0x17
+
+#ifndef IS31FL3218_I2C_TIMEOUT
+# define IS31FL3218_I2C_TIMEOUT 100
+#endif
+
+#ifndef IS31FL3218_I2C_PERSISTENCE
+# define IS31FL3218_I2C_PERSISTENCE 0
+#endif
+
+// Reusable buffer for transfers
+uint8_t g_twi_transfer_buffer[20];
+
+// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
+uint8_t g_pwm_buffer[18];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[3] = {0};
+bool g_led_control_registers_update_required = false;
+
+void is31fl3218_write_register(uint8_t reg, uint8_t data) {
+ g_twi_transfer_buffer[0] = reg;
+ g_twi_transfer_buffer[1] = data;
+#if IS31FL3218_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT) == 0) break;
+ }
+#else
+ i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3218_write_pwm_buffer(uint8_t *pwm_buffer) {
+ g_twi_transfer_buffer[0] = IS31FL3218_REG_PWM;
+ memcpy(g_twi_transfer_buffer + 1, pwm_buffer, 18);
+
+#if IS31FL3218_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
+ i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+ }
+#else
+ i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3218_init(void) {
+ // In case we ever want to reinitialize (?)
+ is31fl3218_write_register(IS31FL3218_REG_RESET, 0x00);
+
+ // Turn off software shutdown
+ is31fl3218_write_register(IS31FL3218_REG_SHUTDOWN, 0x01);
+
+ // Set all PWM values to zero
+ for (uint8_t i = 0; i < 18; i++) {
+ is31fl3218_write_register(IS31FL3218_REG_PWM + i, 0x00);
+ }
+
+ // turn off all LEDs in the LED control register
+ for (uint8_t i = 0; i < 3; i++) {
+ is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, 0x00);
+ }
+
+ // Load PWM registers and LED Control register data
+ is31fl3218_write_register(IS31FL3218_REG_UPDATE, 0x01);
+}
+
+void is31fl3218_set_value(int index, uint8_t value) {
+ is31fl3218_led_t led;
+ if (index >= 0 && index < LED_MATRIX_LED_COUNT) {
+ memcpy_P(&led, (&g_is31fl3218_leds[index]), sizeof(led));
+ }
+ if (g_pwm_buffer[led.v - IS31FL3218_REG_PWM] == value) {
+ return;
+ }
+ g_pwm_buffer[led.v - IS31FL3218_REG_PWM] = value;
+ g_pwm_buffer_update_required = true;
+}
+
+void is31fl3218_set_value_all(uint8_t value) {
+ for (int i = 0; i < LED_MATRIX_LED_COUNT; i++) {
+ is31fl3218_set_value(i, value);
+ }
+}
+
+void is31fl3218_set_led_control_register(uint8_t index, bool value) {
+ is31fl3218_led_t led;
+ memcpy_P(&led, (&g_is31fl3218_leds[index]), sizeof(led));
+
+ uint8_t control_register = (led.v - IS31FL3218_REG_PWM) / 6;
+ uint8_t bit_value = (led.v - IS31FL3218_REG_PWM) % 6;
+
+ if (value) {
+ g_led_control_registers[control_register] |= (1 << bit_value);
+ } else {
+ g_led_control_registers[control_register] &= ~(1 << bit_value);
+ }
+
+ g_led_control_registers_update_required = true;
+}
+
+void is31fl3218_update_pwm_buffers(void) {
+ if (g_pwm_buffer_update_required) {
+ is31fl3218_write_pwm_buffer(g_pwm_buffer);
+ // Load PWM registers and LED Control register data
+ is31fl3218_write_register(IS31FL3218_REG_UPDATE, 0x01);
+
+ g_pwm_buffer_update_required = false;
+ }
+}
+
+void is31fl3218_update_led_control_registers(void) {
+ if (g_led_control_registers_update_required) {
+ for (int i = 0; i < 3; i++) {
+ is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, g_led_control_registers[i]);
+ }
+
+ g_led_control_registers_update_required = false;
+ }
+}
diff --git a/drivers/led/issi/is31fl3218-simple.h b/drivers/led/issi/is31fl3218-simple.h
new file mode 100644
index 0000000000..2260361ec6
--- /dev/null
+++ b/drivers/led/issi/is31fl3218-simple.h
@@ -0,0 +1,60 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "progmem.h"
+
+#define IS31FL3218_I2C_ADDRESS 0x54
+
+typedef struct is31fl3218_led_t {
+ uint8_t v;
+} __attribute__((packed)) is31fl3218_led_t;
+
+extern const is31fl3218_led_t PROGMEM g_is31fl3218_leds[LED_MATRIX_LED_COUNT];
+
+void is31fl3218_init(void);
+
+void is31fl3218_set_value(int index, uint8_t value);
+
+void is31fl3218_set_value_all(uint8_t value);
+
+void is31fl3218_set_led_control_register(uint8_t index, bool value);
+
+void is31fl3218_update_pwm_buffers(void);
+
+void is31fl3218_update_led_control_registers(void);
+
+#define OUT1 0x01
+#define OUT2 0x02
+#define OUT3 0x03
+#define OUT4 0x04
+#define OUT5 0x05
+#define OUT6 0x06
+#define OUT7 0x07
+#define OUT8 0x08
+#define OUT9 0x09
+#define OUT10 0x0A
+#define OUT11 0x0B
+#define OUT12 0x0C
+#define OUT13 0x0D
+#define OUT14 0x0E
+#define OUT15 0x0F
+#define OUT16 0x10
+#define OUT17 0x11
+#define OUT18 0x12
diff --git a/drivers/led/issi/is31fl3218.c b/drivers/led/issi/is31fl3218.c
index 970e9a0be9..87a0acfc08 100644
--- a/drivers/led/issi/is31fl3218.c
+++ b/drivers/led/issi/is31fl3218.c
@@ -14,84 +14,146 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "is31fl3218.h"
+#include <string.h>
#include "i2c_master.h"
-// This is the full 8-bit address
-#define ISSI_ADDRESS 0b10101000
-
// These are the register addresses
-#define ISSI_REG_SHUTDOWN 0x00
-#define ISSI_REG_PWM 0x01
-#define ISSI_REG_CONTROL 0x13
-#define ISSI_REG_UPDATE 0x16
-#define ISSI_REG_RESET 0x17
+#define IS31FL3218_REG_SHUTDOWN 0x00
+#define IS31FL3218_REG_PWM 0x01
+#define IS31FL3218_REG_CONTROL 0x13
+#define IS31FL3218_REG_UPDATE 0x16
+#define IS31FL3218_REG_RESET 0x17
+
+#ifndef IS31FL3218_I2C_TIMEOUT
+# define IS31FL3218_I2C_TIMEOUT 100
+#endif
-// Default timeout if no I2C response
-#define ISSI_TIMEOUT 100
+#ifndef IS31FL3218_I2C_PERSISTENCE
+# define IS31FL3218_I2C_PERSISTENCE 0
+#endif
// Reusable buffer for transfers
uint8_t g_twi_transfer_buffer[20];
// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
-// If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
uint8_t g_pwm_buffer[18];
bool g_pwm_buffer_update_required = false;
+uint8_t g_led_control_registers[3] = {0};
+bool g_led_control_registers_update_required = false;
+
void is31fl3218_write_register(uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
- i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+#if IS31FL3218_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT) == 0) break;
+ }
+#else
+ i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT);
+#endif
}
void is31fl3218_write_pwm_buffer(uint8_t *pwm_buffer) {
- g_twi_transfer_buffer[0] = ISSI_REG_PWM;
+ g_twi_transfer_buffer[0] = IS31FL3218_REG_PWM;
memcpy(g_twi_transfer_buffer + 1, pwm_buffer, 18);
- i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
+#if IS31FL3218_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
+ i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+ }
+#else
+ i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+#endif
}
void is31fl3218_init(void) {
// In case we ever want to reinitialize (?)
- is31fl3218_write_register(ISSI_REG_RESET, 0x00);
+ is31fl3218_write_register(IS31FL3218_REG_RESET, 0x00);
// Turn off software shutdown
- is31fl3218_write_register(ISSI_REG_SHUTDOWN, 0x01);
+ is31fl3218_write_register(IS31FL3218_REG_SHUTDOWN, 0x01);
// Set all PWM values to zero
for (uint8_t i = 0; i < 18; i++) {
- is31fl3218_write_register(ISSI_REG_PWM + i, 0x00);
+ is31fl3218_write_register(IS31FL3218_REG_PWM + i, 0x00);
}
- // Enable all channels
+ // turn off all LEDs in the LED control register
for (uint8_t i = 0; i < 3; i++) {
- is31fl3218_write_register(ISSI_REG_CONTROL + i, 0b00111111);
+ is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, 0x00);
}
// Load PWM registers and LED Control register data
- is31fl3218_write_register(ISSI_REG_UPDATE, 0x01);
+ is31fl3218_write_register(IS31FL3218_REG_UPDATE, 0x01);
}
void is31fl3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
- if (g_pwm_buffer[index * 3 + 0] == red && g_pwm_buffer[index * 3 + 1] == green && g_pwm_buffer[index * 3 + 2] == blue) {
+ is31fl3218_led_t led;
+ if (index >= 0 && index < RGB_MATRIX_LED_COUNT) {
+ memcpy_P(&led, (&g_is31fl3218_leds[index]), sizeof(led));
+ }
+ if (g_pwm_buffer[led.r - IS31FL3218_REG_PWM] == red && g_pwm_buffer[led.g - IS31FL3218_REG_PWM] == green && g_pwm_buffer[led.b - IS31FL3218_REG_PWM] == blue) {
return;
}
- g_pwm_buffer[index * 3 + 0] = red;
- g_pwm_buffer[index * 3 + 1] = green;
- g_pwm_buffer[index * 3 + 2] = blue;
- g_pwm_buffer_update_required = true;
+ g_pwm_buffer[led.r - IS31FL3218_REG_PWM] = red;
+ g_pwm_buffer[led.g - IS31FL3218_REG_PWM] = green;
+ g_pwm_buffer[led.b - IS31FL3218_REG_PWM] = blue;
+ g_pwm_buffer_update_required = true;
}
void is31fl3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
- for (int i = 0; i < 6; i++) {
+ for (int i = 0; i < RGB_MATRIX_LED_COUNT; i++) {
is31fl3218_set_color(i, red, green, blue);
}
}
+void is31fl3218_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+ is31fl3218_led_t led;
+ memcpy_P(&led, (&g_is31fl3218_leds[index]), sizeof(led));
+
+ uint8_t control_register_r = (led.r - IS31FL3218_REG_PWM) / 6;
+ uint8_t control_register_g = (led.g - IS31FL3218_REG_PWM) / 6;
+ uint8_t control_register_b = (led.b - IS31FL3218_REG_PWM) / 6;
+ uint8_t bit_r = (led.r - IS31FL3218_REG_PWM) % 6;
+ uint8_t bit_g = (led.g - IS31FL3218_REG_PWM) % 6;
+ uint8_t bit_b = (led.b - IS31FL3218_REG_PWM) % 6;
+
+ if (red) {
+ g_led_control_registers[control_register_r] |= (1 << bit_r);
+ } else {
+ g_led_control_registers[control_register_r] &= ~(1 << bit_r);
+ }
+ if (green) {
+ g_led_control_registers[control_register_g] |= (1 << bit_g);
+ } else {
+ g_led_control_registers[control_register_g] &= ~(1 << bit_g);
+ }
+ if (blue) {
+ g_led_control_registers[control_register_b] |= (1 << bit_b);
+ } else {
+ g_led_control_registers[control_register_b] &= ~(1 << bit_b);
+ }
+
+ g_led_control_registers_update_required = true;
+}
+
void is31fl3218_update_pwm_buffers(void) {
if (g_pwm_buffer_update_required) {
is31fl3218_write_pwm_buffer(g_pwm_buffer);
// Load PWM registers and LED Control register data
- is31fl3218_write_register(ISSI_REG_UPDATE, 0x01);
+ is31fl3218_write_register(IS31FL3218_REG_UPDATE, 0x01);
+
+ g_pwm_buffer_update_required = false;
+ }
+}
+
+void is31fl3218_update_led_control_registers(void) {
+ if (g_led_control_registers_update_required) {
+ for (int i = 0; i < 3; i++) {
+ is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, g_led_control_registers[i]);
+ }
+
+ g_led_control_registers_update_required = false;
}
- g_pwm_buffer_update_required = false;
}
diff --git a/drivers/led/issi/is31fl3218.h b/drivers/led/issi/is31fl3218.h
index 2fe3768432..a5ac44fd1d 100644
--- a/drivers/led/issi/is31fl3218.h
+++ b/drivers/led/issi/is31fl3218.h
@@ -18,9 +18,45 @@
#include <stdint.h>
#include <stdbool.h>
-#include <string.h>
+#include "progmem.h"
+
+#define IS31FL3218_I2C_ADDRESS 0x54
+
+typedef struct is31fl3218_led_t {
+ uint8_t r;
+ uint8_t g;
+ uint8_t b;
+} __attribute__((packed)) is31fl3218_led_t;
+
+extern const is31fl3218_led_t PROGMEM g_is31fl3218_leds[RGB_MATRIX_LED_COUNT];
void is31fl3218_init(void);
+
void is31fl3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+
void is31fl3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+
+void is31fl3218_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+
void is31fl3218_update_pwm_buffers(void);
+
+void is31fl3218_update_led_control_registers(void);
+
+#define OUT1 0x01
+#define OUT2 0x02
+#define OUT3 0x03
+#define OUT4 0x04
+#define OUT5 0x05
+#define OUT6 0x06
+#define OUT7 0x07
+#define OUT8 0x08
+#define OUT9 0x09
+#define OUT10 0x0A
+#define OUT11 0x0B
+#define OUT12 0x0C
+#define OUT13 0x0D
+#define OUT14 0x0E
+#define OUT15 0x0F
+#define OUT16 0x10
+#define OUT17 0x11
+#define OUT18 0x12
diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c
index f7f6980a3b..5ea4613845 100644
--- a/drivers/led/issi/is31fl3731-simple.c
+++ b/drivers/led/issi/is31fl3731-simple.c
@@ -18,44 +18,36 @@
*/
#include "is31fl3731-simple.h"
+#include <string.h>
#include "i2c_master.h"
#include "wait.h"
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define ISSI_ADDR_DEFAULT 0x74
+#define IS31FL3731_REG_CONFIG 0x00
+#define IS31FL3731_REG_CONFIG_PICTUREMODE 0x00
+#define IS31FL3731_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31FL3731_REG_CONFIG_AUDIOPLAYMODE 0x18
-#define ISSI_REG_CONFIG 0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+#define IS31FL3731_CONF_PICTUREMODE 0x00
+#define IS31FL3731_CONF_AUTOFRAMEMODE 0x04
+#define IS31FL3731_CONF_AUDIOMODE 0x08
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
-
-#define ISSI_REG_PICTUREFRAME 0x01
+#define IS31FL3731_REG_PICTUREFRAME 0x01
// Not defined in the datasheet -- See AN for IC
-#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
+#define IS31FL3731_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
+#define IS31FL3731_REG_SHUTDOWN 0x0A
+#define IS31FL3731_REG_AUDIOSYNC 0x06
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define IS31FL3731_COMMANDREGISTER 0xFD
+#define IS31FL3731_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#ifndef IS31FL3731_I2C_TIMEOUT
+# define IS31FL3731_I2C_TIMEOUT 100
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3731_I2C_PERSISTENCE
+# define IS31FL3731_I2C_PERSISTENCE 0
#endif
// Transfer buffer for TWITransmitData()
@@ -66,47 +58,24 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3731_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false};
-
-/* There's probably a better way to init this... */
-#if LED_DRIVER_COUNT == 1
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
-#elif LED_DRIVER_COUNT == 2
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
-#elif LED_DRIVER_COUNT == 3
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
-#elif LED_DRIVER_COUNT == 4
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
-#endif
-bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false};
-
-// This is the bit pattern in the LED control registers
-// (for matrix A, add one to register for matrix B)
-//
-// reg - b7 b6 b5 b4 b3 b2 b1 b0
-// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
-// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
-// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
-// 0x06 - - , - , - , - , - ,B02,B01,B00
-// 0x08 - - , - , - , - , - , - , - , -
-// 0x0A - B17,B16,B15, - , - , - , - , -
-// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
-// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
-// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+uint8_t g_pwm_buffer[IS31FL3731_DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required[IS31FL3731_DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18] = {0};
+bool g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT] = {false};
void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+#if IS31FL3731_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) {
break;
}
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
#endif
}
@@ -125,12 +94,12 @@ void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3731_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
#endif
}
}
@@ -142,26 +111,26 @@ void is31fl3731_init(uint8_t addr) {
// then disable software shutdown.
// select "function register" bank
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
// enable software shutdown
- is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
-#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
- is31fl3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
+ is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x00);
+#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array
+ is31fl3731_write_register(addr, IS31FL3731_REG_GHOST_IMAGE_PREVENTION, 0x10);
#endif
// this delay was copied from other drivers, might not be needed
wait_ms(10);
// picture mode
- is31fl3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+ is31fl3731_write_register(addr, IS31FL3731_REG_CONFIG, IS31FL3731_REG_CONFIG_PICTUREMODE);
// display frame 0
- is31fl3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+ is31fl3731_write_register(addr, IS31FL3731_REG_PICTUREFRAME, 0x00);
// audio sync off
- is31fl3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+ is31fl3731_write_register(addr, IS31FL3731_REG_AUDIOSYNC, 0x00);
// select bank 0
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
// turn off all LEDs in the LED control register
for (int i = 0x00; i <= 0x11; i++) {
@@ -179,15 +148,15 @@ void is31fl3731_init(uint8_t addr) {
}
// select "function register" bank
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
// disable software shutdown
- is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+ is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x01);
// select bank 0 and leave it selected.
// most usage after initialization is just writing PWM buffers in bank 0
// as there's not much point in double-buffering
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
}
void is31fl3731_set_value(int index, uint8_t value) {
diff --git a/drivers/led/issi/is31fl3731-simple.h b/drivers/led/issi/is31fl3731-simple.h
index 69fba14a0b..e6c9ce37c5 100644
--- a/drivers/led/issi/is31fl3731-simple.h
+++ b/drivers/led/issi/is31fl3731-simple.h
@@ -20,9 +20,28 @@
#include <stdint.h>
#include <stdbool.h>
-#include <string.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef LED_DRIVER_COUNT
+# define IS31FL3731_DRIVER_COUNT LED_DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3731_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3731_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_3731_DEGHOST
+# define IS31FL3731_DEGHOST ISSI_3731_DEGHOST
+#endif
+// ========
+
+#define IS31FL3731_I2C_ADDRESS_GND 0x74
+#define IS31FL3731_I2C_ADDRESS_SCL 0x75
+#define IS31FL3731_I2C_ADDRESS_SDA 0x76
+#define IS31FL3731_I2C_ADDRESS_VCC 0x77
+
typedef struct is31_led {
uint8_t driver : 2;
uint8_t v;
diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c
index 15a01b6d75..d6ee5cdd94 100644
--- a/drivers/led/issi/is31fl3731.c
+++ b/drivers/led/issi/is31fl3731.c
@@ -17,44 +17,36 @@
*/
#include "is31fl3731.h"
+#include <string.h>
#include "i2c_master.h"
#include "wait.h"
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define ISSI_ADDR_DEFAULT 0x74
+#define IS31FL3731_REG_CONFIG 0x00
+#define IS31FL3731_REG_CONFIG_PICTUREMODE 0x00
+#define IS31FL3731_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31FL3731_REG_CONFIG_AUDIOPLAYMODE 0x18
-#define ISSI_REG_CONFIG 0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+#define IS31FL3731_CONF_PICTUREMODE 0x00
+#define IS31FL3731_CONF_AUTOFRAMEMODE 0x04
+#define IS31FL3731_CONF_AUDIOMODE 0x08
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
-
-#define ISSI_REG_PICTUREFRAME 0x01
+#define IS31FL3731_REG_PICTUREFRAME 0x01
// Not defined in the datasheet -- See AN for IC
-#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
+#define IS31FL3731_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
+#define IS31FL3731_REG_SHUTDOWN 0x0A
+#define IS31FL3731_REG_AUDIOSYNC 0x06
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define IS31FL3731_COMMANDREGISTER 0xFD
+#define IS31FL3731_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#ifndef IS31FL3731_I2C_TIMEOUT
+# define IS31FL3731_I2C_TIMEOUT 100
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3731_I2C_PERSISTENCE
+# define IS31FL3731_I2C_PERSISTENCE 0
#endif
// Transfer buffer for TWITransmitData()
@@ -65,36 +57,22 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3731_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
-
-uint8_t g_led_control_registers[DRIVER_COUNT][18] = {{0}};
-bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
-
-// This is the bit pattern in the LED control registers
-// (for matrix A, add one to register for matrix B)
-//
-// reg - b7 b6 b5 b4 b3 b2 b1 b0
-// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
-// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
-// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
-// 0x06 - - , - , - , - , - ,B02,B01,B00
-// 0x08 - - , - , - , - , - , - , - , -
-// 0x0A - B17,B16,B15, - , - , - , - , -
-// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
-// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
-// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+uint8_t g_pwm_buffer[IS31FL3731_DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required[IS31FL3731_DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18] = {0};
+bool g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT] = {false};
void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3731_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
#endif
}
@@ -113,12 +91,12 @@ void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3731_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
#endif
}
}
@@ -130,26 +108,26 @@ void is31fl3731_init(uint8_t addr) {
// then disable software shutdown.
// select "function register" bank
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
// enable software shutdown
- is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
-#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
- is31fl3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
+ is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x00);
+#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array
+ is31fl3731_write_register(addr, IS31FL3731_REG_GHOST_IMAGE_PREVENTION, 0x10);
#endif
// this delay was copied from other drivers, might not be needed
wait_ms(10);
// picture mode
- is31fl3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+ is31fl3731_write_register(addr, IS31FL3731_REG_CONFIG, IS31FL3731_REG_CONFIG_PICTUREMODE);
// display frame 0
- is31fl3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+ is31fl3731_write_register(addr, IS31FL3731_REG_PICTUREFRAME, 0x00);
// audio sync off
- is31fl3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+ is31fl3731_write_register(addr, IS31FL3731_REG_AUDIOSYNC, 0x00);
// select bank 0
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
// turn off all LEDs in the LED control register
for (int i = 0x00; i <= 0x11; i++) {
@@ -167,15 +145,15 @@ void is31fl3731_init(uint8_t addr) {
}
// select "function register" bank
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
// disable software shutdown
- is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+ is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x01);
// select bank 0 and leave it selected.
// most usage after initialization is just writing PWM buffers in bank 0
// as there's not much point in double-buffering
- is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+ is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
}
void is31fl3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
diff --git a/drivers/led/issi/is31fl3731.h b/drivers/led/issi/is31fl3731.h
index bdf03de1ee..ccd972a03e 100644
--- a/drivers/led/issi/is31fl3731.h
+++ b/drivers/led/issi/is31fl3731.h
@@ -19,9 +19,28 @@
#include <stdint.h>
#include <stdbool.h>
-#include <string.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define IS31FL3731_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3731_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3731_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_3731_DEGHOST
+# define IS31FL3731_DEGHOST ISSI_3731_DEGHOST
+#endif
+// ========
+
+#define IS31FL3731_I2C_ADDRESS_GND 0x74
+#define IS31FL3731_I2C_ADDRESS_SCL 0x75
+#define IS31FL3731_I2C_ADDRESS_SDA 0x76
+#define IS31FL3731_I2C_ADDRESS_VCC 0x77
+
typedef struct is31_led {
uint8_t driver : 2;
uint8_t r;
diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c
index f9a0a271a8..6f7a8af79c 100644
--- a/drivers/led/issi/is31fl3733-simple.c
+++ b/drivers/led/issi/is31fl3733-simple.c
@@ -19,59 +19,48 @@
*/
#include "is31fl3733-simple.h"
+#include <string.h>
#include "i2c_master.h"
#include "wait.h"
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
-
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#define IS31FL3733_COMMANDREGISTER 0xFD
+#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
+
+#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3733_PAGE_PWM 0x01 // PG1
+#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
+
+#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3733_REG_RESET 0x11 // PG3
+#define IS31FL3733_REG_SWPULLUP 0x0F // PG3
+#define IS31FL3733_REG_CSPULLUP 0x10 // PG3
+
+#ifndef IS31FL3733_I2C_TIMEOUT
+# define IS31FL3733_I2C_TIMEOUT 100
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3733_I2C_PERSISTENCE
+# define IS31FL3733_I2C_PERSISTENCE 0
#endif
-#ifndef ISSI_PWM_FREQUENCY
-# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+#ifndef IS31FL3733_PWM_FREQUENCY
+# define IS31FL3733_PWM_FREQUENCY IS31FL3733_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3733B only
#endif
-#ifndef ISSI_SWPULLUP
-# define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3733_SWPULLUP
+# define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
#endif
-#ifndef ISSI_CSPULLUP
-# define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3733_CSPULLUP
+# define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
#endif
-#ifndef ISSI_GLOBALCURRENT
-# define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3733_GLOBALCURRENT
+# define IS31FL3733_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@@ -83,34 +72,25 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[LED_DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false};
-
-/* There's probably a better way to init this... */
-#if LED_DRIVER_COUNT == 1
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}};
-#elif LED_DRIVER_COUNT == 2
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}};
-#elif LED_DRIVER_COUNT == 3
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}};
-#elif LED_DRIVER_COUNT == 4
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}};
-#endif
-bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -131,14 +111,14 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -154,20 +134,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3733_write_register(addr, i, 0x00);
}
// Unlock the command register.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
@@ -175,18 +155,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
- is31fl3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+ is31fl3733_write_register(addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
- is31fl3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+ is31fl3733_write_register(addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
// Set global current to maximum.
- is31fl3733_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+ is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
// Disable software shutdown.
- is31fl3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+ is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@@ -230,8 +210,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value) {
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@@ -245,8 +225,8 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
}
diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h
index 1458f7ac8d..b870c5c58c 100644
--- a/drivers/led/issi/is31fl3733-simple.h
+++ b/drivers/led/issi/is31fl3733-simple.h
@@ -22,9 +22,57 @@
#include <stdint.h>
#include <stdbool.h>
-#include <string.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef LED_DRIVER_COUNT
+# define IS31FL3733_DRIVER_COUNT LED_DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3733_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_PWM_FREQUENCY
+# define IS31FL3733_PWM_FREQUENCY ISSI_PWM_FREQUENCY
+#endif
+#ifdef ISSI_SWPULLUP
+# define IS31FL3733_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+# define IS31FL3733_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+# define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3733_PUR_0R
+#define PUR_05KR IS31FL3733_PUR_05KR
+#define PUR_3KR IS31FL3733_PUR_3KR
+#define PUR_4KR IS31FL3733_PUR_4KR
+#define PUR_8KR IS31FL3733_PUR_8KR
+#define PUR_16KR IS31FL3733_PUR_16KR
+#define PUR_32KR IS31FL3733_PUR_32KR
+// ========
+
+#define IS31FL3733_I2C_ADDRESS_GND_GND 0x50
+#define IS31FL3733_I2C_ADDRESS_GND_SCL 0x51
+#define IS31FL3733_I2C_ADDRESS_GND_SDA 0x52
+#define IS31FL3733_I2C_ADDRESS_GND_VCC 0x53
+#define IS31FL3733_I2C_ADDRESS_SCL_GND 0x54
+#define IS31FL3733_I2C_ADDRESS_SCL_SCL 0x55
+#define IS31FL3733_I2C_ADDRESS_SCL_SDA 0x56
+#define IS31FL3733_I2C_ADDRESS_SCL_VCC 0x57
+#define IS31FL3733_I2C_ADDRESS_SDA_GND 0x58
+#define IS31FL3733_I2C_ADDRESS_SDA_SCL 0x59
+#define IS31FL3733_I2C_ADDRESS_SDA_SDA 0x5A
+#define IS31FL3733_I2C_ADDRESS_SDA_VCC 0x5B
+#define IS31FL3733_I2C_ADDRESS_VCC_GND 0x5C
+#define IS31FL3733_I2C_ADDRESS_VCC_SCL 0x5D
+#define IS31FL3733_I2C_ADDRESS_VCC_SDA 0x5E
+#define IS31FL3733_I2C_ADDRESS_VCC_VCC 0x5F
+
typedef struct is31_led {
uint8_t driver : 2;
uint8_t v;
@@ -48,13 +96,19 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value);
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index);
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
-#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
-#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
-#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
-#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_0R 0x00 // No PUR resistor
+#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+
+#define IS31FL3733_PWM_FREQUENCY_8K4_HZ 0b000
+#define IS31FL3733_PWM_FREQUENCY_4K2_HZ 0b001
+#define IS31FL3733_PWM_FREQUENCY_26K7_HZ 0b010
+#define IS31FL3733_PWM_FREQUENCY_2K1_HZ 0b011
+#define IS31FL3733_PWM_FREQUENCY_1K05_HZ 0b100
#define A_1 0x00
#define A_2 0x01
diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c
index ca431838ef..e501175a11 100644
--- a/drivers/led/issi/is31fl3733.c
+++ b/drivers/led/issi/is31fl3733.c
@@ -18,59 +18,48 @@
*/
#include "is31fl3733.h"
+#include <string.h>
#include "i2c_master.h"
#include "wait.h"
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
-
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#define IS31FL3733_COMMANDREGISTER 0xFD
+#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
+
+#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3733_PAGE_PWM 0x01 // PG1
+#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
+
+#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3733_REG_RESET 0x11 // PG3
+#define IS31FL3733_REG_SWPULLUP 0x0F // PG3
+#define IS31FL3733_REG_CSPULLUP 0x10 // PG3
+
+#ifndef IS31FL3733_I2C_TIMEOUT
+# define IS31FL3733_I2C_TIMEOUT 100
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3733_I2C_PERSISTENCE
+# define IS31FL3733_I2C_PERSISTENCE 0
#endif
-#ifndef ISSI_PWM_FREQUENCY
-# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+#ifndef IS31FL3733_PWM_FREQUENCY
+# define IS31FL3733_PWM_FREQUENCY IS31FL3733_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3733B only
#endif
-#ifndef ISSI_SWPULLUP
-# define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3733_SWPULLUP
+# define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
#endif
-#ifndef ISSI_CSPULLUP
-# define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3733_CSPULLUP
+# define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
#endif
-#ifndef ISSI_GLOBALCURRENT
-# define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3733_GLOBALCURRENT
+# define IS31FL3733_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@@ -82,25 +71,25 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0};
-bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -119,18 +108,16 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// Copy the data from i to i+15.
// Device will auto-increment register for data after the first byte
// Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
- for (int j = 0; j < 16; j++) {
- g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
- }
+ memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -146,20 +133,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3733_write_register(addr, i, 0x00);
}
// Unlock the command register.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
@@ -167,18 +154,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
- is31fl3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+ is31fl3733_write_register(addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
- is31fl3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+ is31fl3733_write_register(addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
// Set global current to maximum.
- is31fl3733_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+ is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
// Disable software shutdown.
- is31fl3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+ is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@@ -238,26 +225,26 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
if (!is31fl3733_write_pwm_buffer(addr, g_pwm_buffer[index])) {
g_led_control_registers_update_required[index] = true;
}
+ g_pwm_buffer_update_required[index] = false;
}
- g_pwm_buffer_update_required[index] = false;
}
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
}
+ g_led_control_registers_update_required[index] = false;
}
- g_led_control_registers_update_required[index] = false;
}
diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h
index f37a58de0f..e16560807f 100644
--- a/drivers/led/issi/is31fl3733.h
+++ b/drivers/led/issi/is31fl3733.h
@@ -23,6 +23,55 @@
#include <stdbool.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define IS31FL3733_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3733_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_PWM_FREQUENCY
+# define IS31FL3733_PWM_FREQUENCY ISSI_PWM_FREQUENCY
+#endif
+#ifdef ISSI_SWPULLUP
+# define IS31FL3733_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+# define IS31FL3733_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+# define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3733_PUR_0R
+#define PUR_05KR IS31FL3733_PUR_05KR
+#define PUR_3KR IS31FL3733_PUR_3KR
+#define PUR_4KR IS31FL3733_PUR_4KR
+#define PUR_8KR IS31FL3733_PUR_8KR
+#define PUR_16KR IS31FL3733_PUR_16KR
+#define PUR_32KR IS31FL3733_PUR_32KR
+// ========
+
+#define IS31FL3733_I2C_ADDRESS_GND_GND 0x50
+#define IS31FL3733_I2C_ADDRESS_GND_SCL 0x51
+#define IS31FL3733_I2C_ADDRESS_GND_SDA 0x52
+#define IS31FL3733_I2C_ADDRESS_GND_VCC 0x53
+#define IS31FL3733_I2C_ADDRESS_SCL_GND 0x54
+#define IS31FL3733_I2C_ADDRESS_SCL_SCL 0x55
+#define IS31FL3733_I2C_ADDRESS_SCL_SDA 0x56
+#define IS31FL3733_I2C_ADDRESS_SCL_VCC 0x57
+#define IS31FL3733_I2C_ADDRESS_SDA_GND 0x58
+#define IS31FL3733_I2C_ADDRESS_SDA_SCL 0x59
+#define IS31FL3733_I2C_ADDRESS_SDA_SDA 0x5A
+#define IS31FL3733_I2C_ADDRESS_SDA_VCC 0x5B
+#define IS31FL3733_I2C_ADDRESS_VCC_GND 0x5C
+#define IS31FL3733_I2C_ADDRESS_VCC_SCL 0x5D
+#define IS31FL3733_I2C_ADDRESS_VCC_SDA 0x5E
+#define IS31FL3733_I2C_ADDRESS_VCC_VCC 0x5F
+
typedef struct is31_led {
uint8_t driver : 2;
uint8_t r;
@@ -48,13 +97,19 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index);
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
-#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
-#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
-#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
-#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_0R 0x00 // No PUR resistor
+#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+
+#define IS31FL3733_PWM_FREQUENCY_8K4_HZ 0b000
+#define IS31FL3733_PWM_FREQUENCY_4K2_HZ 0b001
+#define IS31FL3733_PWM_FREQUENCY_26K7_HZ 0b010
+#define IS31FL3733_PWM_FREQUENCY_2K1_HZ 0b011
+#define IS31FL3733_PWM_FREQUENCY_1K05_HZ 0b100
#define A_1 0x00
#define A_2 0x01
diff --git a/drivers/led/issi/is31fl3736-simple.c b/drivers/led/issi/is31fl3736-simple.c
new file mode 100644
index 0000000000..cd4038ac2c
--- /dev/null
+++ b/drivers/led/issi/is31fl3736-simple.c
@@ -0,0 +1,222 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Doni Crosby
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "is31fl3736-simple.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "wait.h"
+
+#define IS31FL3736_COMMANDREGISTER 0xFD
+#define IS31FL3736_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3736_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3736_INTERRUPTSTATUSREGISTER 0xF1
+
+#define IS31FL3736_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3736_PAGE_PWM 0x01 // PG1
+#define IS31FL3736_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3736_PAGE_FUNCTION 0x03 // PG3
+
+#define IS31FL3736_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3736_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3736_REG_RESET 0x11 // PG3
+#define IS31FL3736_REG_SWPULLUP 0x0F // PG3
+#define IS31FL3736_REG_CSPULLUP 0x10 // PG3
+
+#ifndef IS31FL3736_I2C_TIMEOUT
+# define IS31FL3736_I2C_TIMEOUT 100
+#endif
+
+#ifndef IS31FL3736_I2C_PERSISTENCE
+# define IS31FL3736_I2C_PERSISTENCE 0
+#endif
+
+#ifndef IS31FL3736_PWM_FREQUENCY
+# define IS31FL3736_PWM_FREQUENCY IS31FL3736_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3736B only
+#endif
+
+#ifndef IS31FL3736_SWPULLUP
+# define IS31FL3736_SWPULLUP IS31FL3736_PUR_0R
+#endif
+
+#ifndef IS31FL3736_CSPULLUP
+# define IS31FL3736_CSPULLUP IS31FL3736_PUR_0R
+#endif
+
+#ifndef IS31FL3736_GLOBALCURRENT
+# define IS31FL3736_GLOBALCURRENT 0xFF
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3736 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in is31fl3736_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[IS31FL3736_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[IS31FL3736_DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[IS31FL3736_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[IS31FL3736_DRIVER_COUNT] = {false};
+
+void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+ g_twi_transfer_buffer[0] = reg;
+ g_twi_transfer_buffer[1] = data;
+
+#if IS31FL3736_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
+ }
+#else
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+ // assumes PG1 is already selected
+
+ // transmit PWM registers in 12 transfers of 16 bytes
+ // g_twi_transfer_buffer[] is 20 bytes
+
+ // iterate over the pwm_buffer contents at 16 byte intervals
+ for (int i = 0; i < 192; i += 16) {
+ g_twi_transfer_buffer[0] = i;
+ // copy the data from i to i+15
+ // device will auto-increment register for data after the first byte
+ // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+ memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+
+#if IS31FL3736_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
+ }
+#else
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
+#endif
+ }
+}
+
+void is31fl3736_init(uint8_t addr) {
+ // In order to avoid the LEDs being driven with garbage data
+ // in the LED driver's PWM registers, shutdown is enabled last.
+ // Set up the mode and other settings, clear the PWM registers,
+ // then disable software shutdown.
+
+ // Unlock the command register.
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+
+ // Select PG0
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
+ // Turn off all LEDs.
+ for (int i = 0x00; i <= 0x17; i++) {
+ is31fl3736_write_register(addr, i, 0x00);
+ }
+
+ // Unlock the command register.
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+
+ // Select PG1
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
+ // Set PWM on all LEDs to 0
+ // No need to setup Breath registers to PWM as that is the default.
+ for (int i = 0x00; i <= 0xBF; i++) {
+ is31fl3736_write_register(addr, i, 0x00);
+ }
+
+ // Unlock the command register.
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+
+ // Select PG3
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_FUNCTION);
+ // Set de-ghost pull-up resistors (SWx)
+ is31fl3736_write_register(addr, IS31FL3736_REG_SWPULLUP, IS31FL3736_SWPULLUP);
+ // Set de-ghost pull-down resistors (CSx)
+ is31fl3736_write_register(addr, IS31FL3736_REG_CSPULLUP, IS31FL3736_CSPULLUP);
+ // Set global current to maximum.
+ is31fl3736_write_register(addr, IS31FL3736_REG_GLOBALCURRENT, IS31FL3736_GLOBALCURRENT);
+ // Disable software shutdown.
+ is31fl3736_write_register(addr, IS31FL3736_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+
+ // Wait 10ms to ensure the device has woken up.
+ wait_ms(10);
+}
+
+void is31fl3736_set_value(int index, uint8_t value) {
+ is31_led led;
+ if (index >= 0 && index < LED_MATRIX_LED_COUNT) {
+ memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
+
+ if (g_pwm_buffer[led.driver][led.v] == value) {
+ return;
+ }
+ g_pwm_buffer[led.driver][led.v] = value;
+ g_pwm_buffer_update_required[led.driver] = true;
+ }
+}
+
+void is31fl3736_set_value_all(uint8_t value) {
+ for (int i = 0; i < LED_MATRIX_LED_COUNT; i++) {
+ is31fl3736_set_value(i, value);
+ }
+}
+
+void is31fl3736_set_led_control_register(uint8_t index, bool value) {
+ is31_led led;
+ memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
+
+ // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
+ // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
+ // B1=0x10 B2=0x12 B3=0x14
+ // But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
+ // A1-A4=0x00 A5-A8=0x01
+
+ uint8_t control_register = led.v / 8;
+ uint8_t bit_value = led.v % 8;
+
+ if (value) {
+ g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
+ } else {
+ g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+ }
+
+ g_led_control_registers_update_required[led.driver] = true;
+}
+
+void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
+ if (g_pwm_buffer_update_required[index]) {
+ // Firstly we need to unlock the command register and select PG1
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
+
+ is31fl3736_write_pwm_buffer(addr, g_pwm_buffer[index]);
+ g_pwm_buffer_update_required[index] = false;
+ }
+}
+
+void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index) {
+ if (g_led_control_registers_update_required[index]) {
+ // Firstly we need to unlock the command register and select PG0
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
+ for (int i = 0; i < 24; i++) {
+ is31fl3736_write_register(addr, i, g_led_control_registers[index][i]);
+ }
+ g_led_control_registers_update_required[index] = false;
+ }
+}
diff --git a/drivers/led/issi/is31fl3736-simple.h b/drivers/led/issi/is31fl3736-simple.h
new file mode 100644
index 0000000000..9f8056af5b
--- /dev/null
+++ b/drivers/led/issi/is31fl3736-simple.h
@@ -0,0 +1,215 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Doni Crosby
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "progmem.h"
+
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define IS31FL3736_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3736_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3736_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_SWPULLUP
+# define IS31FL3736_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+# define IS31FL3736_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+# define IS31FL3736_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3736_PUR_0R
+#define PUR_05KR IS31FL3736_PUR_05KR
+#define PUR_1KR IS31FL3736_PUR_1KR
+#define PUR_2KR IS31FL3736_PUR_2KR
+#define PUR_4KR IS31FL3736_PUR_4KR
+#define PUR_8KR IS31FL3736_PUR_8KR
+#define PUR_16KR IS31FL3736_PUR_16KR
+#define PUR_32KR IS31FL3736_PUR_32KR
+// ========
+
+#define IS31FL3736_I2C_ADDRESS_GND_GND 0x50
+#define IS31FL3736_I2C_ADDRESS_GND_SCL 0x51
+#define IS31FL3736_I2C_ADDRESS_GND_SDA 0x52
+#define IS31FL3736_I2C_ADDRESS_GND_VCC 0x53
+#define IS31FL3736_I2C_ADDRESS_SCL_GND 0x54
+#define IS31FL3736_I2C_ADDRESS_SCL_SCL 0x55
+#define IS31FL3736_I2C_ADDRESS_SCL_SDA 0x56
+#define IS31FL3736_I2C_ADDRESS_SCL_VCC 0x57
+#define IS31FL3736_I2C_ADDRESS_SDA_GND 0x58
+#define IS31FL3736_I2C_ADDRESS_SDA_SCL 0x59
+#define IS31FL3736_I2C_ADDRESS_SDA_SDA 0x5A
+#define IS31FL3736_I2C_ADDRESS_SDA_VCC 0x5B
+#define IS31FL3736_I2C_ADDRESS_VCC_GND 0x5C
+#define IS31FL3736_I2C_ADDRESS_VCC_SCL 0x5D
+#define IS31FL3736_I2C_ADDRESS_VCC_SDA 0x5E
+#define IS31FL3736_I2C_ADDRESS_VCC_VCC 0x5F
+
+typedef struct is31_led {
+ uint8_t driver : 2;
+ uint8_t v;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT];
+
+void is31fl3736_init(uint8_t addr);
+void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void is31fl3736_set_value(int index, uint8_t value);
+void is31fl3736_set_value_all(uint8_t value);
+
+void is31fl3736_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index);
+void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define IS31FL3736_PUR_0R 0x00 // No PUR resistor
+#define IS31FL3736_PUR_05KR 0x01 // 0.5k Ohm resistor
+#define IS31FL3736_PUR_1KR 0x02 // 1.0k Ohm resistor
+#define IS31FL3736_PUR_2KR 0x03 // 2.0k Ohm resistor
+#define IS31FL3736_PUR_4KR 0x04 // 4.0k Ohm resistor
+#define IS31FL3736_PUR_8KR 0x05 // 8.0k Ohm resistor
+#define IS31FL3736_PUR_16KR 0x06 // 16k Ohm resistor
+#define IS31FL3736_PUR_32KR 0x07 // 32k Ohm resistor
+
+#define IS31FL3736_PWM_FREQUENCY_8K4_HZ 0b000
+#define IS31FL3736_PWM_FREQUENCY_4K2_HZ 0b001
+#define IS31FL3736_PWM_FREQUENCY_26K7_HZ 0b010
+#define IS31FL3736_PWM_FREQUENCY_2K1_HZ 0b011
+#define IS31FL3736_PWM_FREQUENCY_1K05_HZ 0b100
+
+#define A_1 0x00
+#define A_2 0x02
+#define A_3 0x04
+#define A_4 0x06
+#define A_5 0x08
+#define A_6 0x0A
+#define A_7 0x0C
+#define A_8 0x0E
+
+#define B_1 0x10
+#define B_2 0x12
+#define B_3 0x14
+#define B_4 0x16
+#define B_5 0x18
+#define B_6 0x1A
+#define B_7 0x1C
+#define B_8 0x1E
+
+#define C_1 0x20
+#define C_2 0x22
+#define C_3 0x24
+#define C_4 0x26
+#define C_5 0x28
+#define C_6 0x2A
+#define C_7 0x2C
+#define C_8 0x2E
+
+#define D_1 0x30
+#define D_2 0x32
+#define D_3 0x34
+#define D_4 0x36
+#define D_5 0x38
+#define D_6 0x3A
+#define D_7 0x3C
+#define D_8 0x3E
+
+#define E_1 0x40
+#define E_2 0x42
+#define E_3 0x44
+#define E_4 0x46
+#define E_5 0x48
+#define E_6 0x4A
+#define E_7 0x4C
+#define E_8 0x4E
+
+#define F_1 0x50
+#define F_2 0x52
+#define F_3 0x54
+#define F_4 0x56
+#define F_5 0x58
+#define F_6 0x5A
+#define F_7 0x5C
+#define F_8 0x5E
+
+#define G_1 0x60
+#define G_2 0x62
+#define G_3 0x64
+#define G_4 0x66
+#define G_5 0x68
+#define G_6 0x6A
+#define G_7 0x6C
+#define G_8 0x6E
+
+#define H_1 0x70
+#define H_2 0x72
+#define H_3 0x74
+#define H_4 0x76
+#define H_5 0x78
+#define H_6 0x7A
+#define H_7 0x7C
+#define H_8 0x7E
+
+#define I_1 0x80
+#define I_2 0x82
+#define I_3 0x84
+#define I_4 0x86
+#define I_5 0x88
+#define I_6 0x8A
+#define I_7 0x8C
+#define I_8 0x8E
+
+#define J_1 0x90
+#define J_2 0x92
+#define J_3 0x94
+#define J_4 0x96
+#define J_5 0x98
+#define J_6 0x9A
+#define J_7 0x9C
+#define J_8 0x9E
+
+#define K_1 0xA0
+#define K_2 0xA2
+#define K_3 0xA4
+#define K_4 0xA6
+#define K_5 0xA8
+#define K_6 0xAA
+#define K_7 0xAC
+#define K_8 0xAE
+
+#define L_1 0xB0
+#define L_2 0xB2
+#define L_3 0xB4
+#define L_4 0xB6
+#define L_5 0xB8
+#define L_6 0xBA
+#define L_7 0xBC
+#define L_8 0xBE
diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c
index 0de8b3bbae..23ff0637a6 100644
--- a/drivers/led/issi/is31fl3736.c
+++ b/drivers/led/issi/is31fl3736.c
@@ -16,55 +16,48 @@
*/
#include "is31fl3736.h"
+#include <string.h>
#include "i2c_master.h"
#include "wait.h"
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
-
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#define IS31FL3736_COMMANDREGISTER 0xFD
+#define IS31FL3736_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3736_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3736_INTERRUPTSTATUSREGISTER 0xF1
+
+#define IS31FL3736_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3736_PAGE_PWM 0x01 // PG1
+#define IS31FL3736_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3736_PAGE_FUNCTION 0x03 // PG3
+
+#define IS31FL3736_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3736_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3736_REG_RESET 0x11 // PG3
+#define IS31FL3736_REG_SWPULLUP 0x0F // PG3
+#define IS31FL3736_REG_CSPULLUP 0x10 // PG3
+
+#ifndef IS31FL3736_I2C_TIMEOUT
+# define IS31FL3736_I2C_TIMEOUT 100
+#endif
+
+#ifndef IS31FL3736_I2C_PERSISTENCE
+# define IS31FL3736_I2C_PERSISTENCE 0
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3736_PWM_FREQUENCY
+# define IS31FL3736_PWM_FREQUENCY IS31FL3736_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3736B only
#endif
-#ifndef ISSI_SWPULLUP
-# define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3736_SWPULLUP
+# define IS31FL3736_SWPULLUP IS31FL3736_PUR_0R
#endif
-#ifndef ISSI_CSPULLUP
-# define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3736_CSPULLUP
+# define IS31FL3736_CSPULLUP IS31FL3736_PUR_0R
#endif
-#ifndef ISSI_GLOBALCURRENT
-# define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3736_GLOBALCURRENT
+# define IS31FL3736_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@@ -76,22 +69,22 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3736_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3736_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[IS31FL3736_DRIVER_COUNT] = {false};
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
-bool g_led_control_registers_update_required = false;
+uint8_t g_led_control_registers[IS31FL3736_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[IS31FL3736_DRIVER_COUNT] = {false};
void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3736_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
#endif
}
@@ -109,12 +102,12 @@ void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3736_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
#endif
}
}
@@ -126,20 +119,20 @@ void is31fl3736_init(uint8_t addr) {
// then disable software shutdown.
// Unlock the command register.
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3736_write_register(addr, i, 0x00);
}
// Unlock the command register.
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
@@ -147,18 +140,18 @@ void is31fl3736_init(uint8_t addr) {
}
// Unlock the command register.
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
- is31fl3736_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+ is31fl3736_write_register(addr, IS31FL3736_REG_SWPULLUP, IS31FL3736_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
- is31fl3736_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+ is31fl3736_write_register(addr, IS31FL3736_REG_CSPULLUP, IS31FL3736_CSPULLUP);
// Set global current to maximum.
- is31fl3736_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+ is31fl3736_write_register(addr, IS31FL3736_REG_GLOBALCURRENT, IS31FL3736_GLOBALCURRENT);
// Disable software shutdown.
- is31fl3736_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
+ is31fl3736_write_register(addr, IS31FL3736_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@@ -189,18 +182,11 @@ void is31fl3736_set_led_control_register(uint8_t index, bool red, bool green, bo
is31_led led;
memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
- // IS31FL3733
- // The PWM register for a matrix position (0x00 to 0xBF) can be
- // divided by 8 to get the LED control register (0x00 to 0x17),
- // then mod 8 to get the bit position within that register.
-
- // IS31FL3736
// The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
// A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
// B1=0x10 B2=0x12 B3=0x14
// But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
// A1-A4=0x00 A5-A8=0x01
- // So, the same math applies.
uint8_t control_register_r = led.r / 8;
uint8_t control_register_g = led.g / 8;
@@ -226,63 +212,28 @@ void is31fl3736_set_led_control_register(uint8_t index, bool red, bool green, bo
g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
}
- g_led_control_registers_update_required = true;
-}
-
-void is31fl3736_mono_set_brightness(int index, uint8_t value) {
- if (index >= 0 && index < 96) {
- // Index in range 0..95 -> A1..A8, B1..B8, etc.
- // Map index 0..95 to registers 0x00..0xBE (interleaved)
- uint8_t pwm_register = index * 2;
- g_pwm_buffer[0][pwm_register] = value;
- g_pwm_buffer_update_required[0] = true;
- }
-}
-
-void is31fl3736_mono_set_brightness_all(uint8_t value) {
- for (int i = 0; i < 96; i++) {
- is31fl3736_mono_set_brightness(i, value);
- }
-}
-
-void is31fl3736_mono_set_led_control_register(uint8_t index, bool enabled) {
- // Index in range 0..95 -> A1..A8, B1..B8, etc.
-
- // Map index 0..95 to registers 0x00..0xBE (interleaved)
- uint8_t pwm_register = index * 2;
- // Map register 0x00..0xBE (interleaved) into control register and bit
- uint8_t control_register = pwm_register / 8;
- uint8_t bit = pwm_register % 8;
-
- if (enabled) {
- g_led_control_registers[0][control_register] |= (1 << bit);
- } else {
- g_led_control_registers[0][control_register] &= ~(1 << bit);
- }
-
- g_led_control_registers_update_required = true;
+ g_led_control_registers_update_required[led.driver] = true;
}
void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
is31fl3736_write_pwm_buffer(addr, g_pwm_buffer[index]);
+ g_pwm_buffer_update_required[index] = false;
}
- g_pwm_buffer_update_required[index] = false;
}
-void is31fl3736_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
- if (g_led_control_registers_update_required) {
+void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index) {
+ if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
- is31fl3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
- is31fl3736_write_register(addr1, i, g_led_control_registers[0][i]);
- // is31fl3736_write_register(addr2, i, g_led_control_registers[1][i]);
+ is31fl3736_write_register(addr, i, g_led_control_registers[index][i]);
}
- g_led_control_registers_update_required = false;
+ g_led_control_registers_update_required[index] = false;
}
}
diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h
index 32bdef4a80..f263b131fd 100644
--- a/drivers/led/issi/is31fl3736.h
+++ b/drivers/led/issi/is31fl3736.h
@@ -19,20 +19,55 @@
#include <stdint.h>
#include <stdbool.h>
-#include <string.h>
#include "progmem.h"
-// Simple interface option.
-// If these aren't defined, just define them to make it compile
-
-#ifndef DRIVER_COUNT
-# define DRIVER_COUNT 2
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define IS31FL3736_DRIVER_COUNT DRIVER_COUNT
#endif
-
-#ifndef RGB_MATRIX_LED_COUNT
-# define RGB_MATRIX_LED_COUNT 96
+#ifdef ISSI_TIMEOUT
+# define IS31FL3736_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3736_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_SWPULLUP
+# define IS31FL3736_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+# define IS31FL3736_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+# define IS31FL3736_GLOBALCURRENT ISSI_GLOBALCURRENT
#endif
+#define PUR_0R IS31FL3736_PUR_0R
+#define PUR_05KR IS31FL3736_PUR_05KR
+#define PUR_1KR IS31FL3736_PUR_1KR
+#define PUR_2KR IS31FL3736_PUR_2KR
+#define PUR_4KR IS31FL3736_PUR_4KR
+#define PUR_8KR IS31FL3736_PUR_8KR
+#define PUR_16KR IS31FL3736_PUR_16KR
+#define PUR_32KR IS31FL3736_PUR_32KR
+// ========
+
+#define IS31FL3736_I2C_ADDRESS_GND_GND 0x50
+#define IS31FL3736_I2C_ADDRESS_GND_SCL 0x51
+#define IS31FL3736_I2C_ADDRESS_GND_SDA 0x52
+#define IS31FL3736_I2C_ADDRESS_GND_VCC 0x53
+#define IS31FL3736_I2C_ADDRESS_SCL_GND 0x54
+#define IS31FL3736_I2C_ADDRESS_SCL_SCL 0x55
+#define IS31FL3736_I2C_ADDRESS_SCL_SDA 0x56
+#define IS31FL3736_I2C_ADDRESS_SCL_VCC 0x57
+#define IS31FL3736_I2C_ADDRESS_SDA_GND 0x58
+#define IS31FL3736_I2C_ADDRESS_SDA_SCL 0x59
+#define IS31FL3736_I2C_ADDRESS_SDA_SDA 0x5A
+#define IS31FL3736_I2C_ADDRESS_SDA_VCC 0x5B
+#define IS31FL3736_I2C_ADDRESS_VCC_GND 0x5C
+#define IS31FL3736_I2C_ADDRESS_VCC_SCL 0x5D
+#define IS31FL3736_I2C_ADDRESS_VCC_SDA 0x5E
+#define IS31FL3736_I2C_ADDRESS_VCC_VCC 0x5F
+
typedef struct is31_led {
uint8_t driver : 2;
uint8_t r;
@@ -51,10 +86,6 @@ void is31fl3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
void is31fl3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
-void is31fl3736_mono_set_brightness(int index, uint8_t value);
-void is31fl3736_mono_set_brightness_all(uint8_t value);
-void is31fl3736_mono_set_led_control_register(uint8_t index, bool enabled);
-
// This should not be called from an interrupt
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
@@ -62,14 +93,20 @@ void is31fl3736_mono_set_led_control_register(uint8_t index, bool enabled);
void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index);
void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor
-#define PUR_1KR 0x02 // 1.0k Ohm resistor
-#define PUR_2KR 0x03 // 2.0k Ohm resistor
-#define PUR_4KR 0x04 // 4.0k Ohm resistor
-#define PUR_8KR 0x05 // 8.0k Ohm resistor
-#define PUR_16KR 0x06 // 16k Ohm resistor
-#define PUR_32KR 0x07 // 32k Ohm resistor
+#define IS31FL3736_PUR_0R 0x00 // No PUR resistor
+#define IS31FL3736_PUR_05KR 0x01 // 0.5k Ohm resistor
+#define IS31FL3736_PUR_1KR 0x02 // 1.0k Ohm resistor
+#define IS31FL3736_PUR_2KR 0x03 // 2.0k Ohm resistor
+#define IS31FL3736_PUR_4KR 0x04 // 4.0k Ohm resistor
+#define IS31FL3736_PUR_8KR 0x05 // 8.0k Ohm resistor
+#define IS31FL3736_PUR_16KR 0x06 // 16k Ohm resistor
+#define IS31FL3736_PUR_32KR 0x07 // 32k Ohm resistor
+
+#define IS31FL3736_PWM_FREQUENCY_8K4_HZ 0b000
+#define IS31FL3736_PWM_FREQUENCY_4K2_HZ 0b001
+#define IS31FL3736_PWM_FREQUENCY_26K7_HZ 0b010
+#define IS31FL3736_PWM_FREQUENCY_2K1_HZ 0b011
+#define IS31FL3736_PWM_FREQUENCY_1K05_HZ 0b100
#define A_1 0x00
#define A_2 0x02
diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c
index 947c0a1d1a..3d93548a46 100644
--- a/drivers/led/issi/is31fl3737.c
+++ b/drivers/led/issi/is31fl3737.c
@@ -18,59 +18,48 @@
*/
#include "is31fl3737.h"
+#include <string.h>
#include "i2c_master.h"
#include "wait.h"
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
-
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#define IS31FL3737_COMMANDREGISTER 0xFD
+#define IS31FL3737_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3737_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3737_INTERRUPTSTATUSREGISTER 0xF1
+
+#define IS31FL3737_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3737_PAGE_PWM 0x01 // PG1
+#define IS31FL3737_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3737_PAGE_FUNCTION 0x03 // PG3
+
+#define IS31FL3737_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3737_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3737_REG_RESET 0x11 // PG3
+#define IS31FL3737_REG_SWPULLUP 0x0F // PG3
+#define IS31FL3737_REG_CSPULLUP 0x10 // PG3
+
+#ifndef IS31FL3737_I2C_TIMEOUT
+# define IS31FL3737_I2C_TIMEOUT 100
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3737_I2C_PERSISTENCE
+# define IS31FL3737_I2C_PERSISTENCE 0
#endif
-#ifndef ISSI_PWM_FREQUENCY
-# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3737B only
+#ifndef IS31FL3737_PWM_FREQUENCY
+# define IS31FL3737_PWM_FREQUENCY IS31FL3737_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3737B only
#endif
-#ifndef ISSI_SWPULLUP
-# define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3737_SWPULLUP
+# define IS31FL3737_SWPULLUP IS31FL3737_PUR_0R
#endif
-#ifndef ISSI_CSPULLUP
-# define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3737_CSPULLUP
+# define IS31FL3737_CSPULLUP IS31FL3737_PUR_0R
#endif
-#ifndef ISSI_GLOBALCURRENT
-# define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3737_GLOBALCURRENT
+# define IS31FL3737_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@@ -83,22 +72,22 @@ uint8_t g_twi_transfer_buffer[20];
// buffers and the transfers in is31fl3737_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3737_DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[IS31FL3737_DRIVER_COUNT] = {false};
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0};
-bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[IS31FL3737_DRIVER_COUNT][24] = {0};
+bool g_led_control_registers_update_required[IS31FL3737_DRIVER_COUNT] = {false};
void is31fl3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3737_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT);
#endif
}
@@ -116,12 +105,12 @@ void is31fl3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3737_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT);
#endif
}
}
@@ -133,20 +122,20 @@ void is31fl3737_init(uint8_t addr) {
// then disable software shutdown.
// Unlock the command register.
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3737_write_register(addr, i, 0x00);
}
// Unlock the command register.
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
@@ -154,18 +143,18 @@ void is31fl3737_init(uint8_t addr) {
}
// Unlock the command register.
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
- is31fl3737_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+ is31fl3737_write_register(addr, IS31FL3737_REG_SWPULLUP, IS31FL3737_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
- is31fl3737_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+ is31fl3737_write_register(addr, IS31FL3737_REG_CSPULLUP, IS31FL3737_CSPULLUP);
// Set global current to maximum.
- is31fl3737_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+ is31fl3737_write_register(addr, IS31FL3737_REG_GLOBALCURRENT, IS31FL3737_GLOBALCURRENT);
// Disable software shutdown.
- is31fl3737_write_register(addr, ISSI_REG_CONFIGURATION, ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+ is31fl3737_write_register(addr, IS31FL3737_REG_CONFIGURATION, ((IS31FL3737_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@@ -225,22 +214,22 @@ void is31fl3737_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM);
is31fl3737_write_pwm_buffer(addr, g_pwm_buffer[index]);
+ g_pwm_buffer_update_required[index] = false;
}
- g_pwm_buffer_update_required[index] = false;
}
void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
is31fl3737_write_register(addr, i, g_led_control_registers[index][i]);
}
+ g_led_control_registers_update_required[index] = false;
}
- g_led_control_registers_update_required[index] = false;
}
diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h
index e7fc97872c..2d6612b704 100644
--- a/drivers/led/issi/is31fl3737.h
+++ b/drivers/led/issi/is31fl3737.h
@@ -21,9 +21,46 @@
#include <stdint.h>
#include <stdbool.h>
-#include <string.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define IS31FL3737_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3737_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3737_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_PWM_FREQUENCY
+# define IS31FL3737_PWM_FREQUENCY ISSI_PWM_FREQUENCY
+#endif
+#ifdef ISSI_SWPULLUP
+# define IS31FL3737_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+# define IS31FL3737_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+# define IS31FL3737_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3737_PUR_0R
+#define PUR_05KR IS31FL3737_PUR_05KR
+#define PUR_1KR IS31FL3737_PUR_1KR
+#define PUR_2KR IS31FL3737_PUR_2KR
+#define PUR_4KR IS31FL3737_PUR_4KR
+#define PUR_8KR IS31FL3737_PUR_8KR
+#define PUR_16KR IS31FL3737_PUR_16KR
+#define PUR_32KR IS31FL3737_PUR_32KR
+// ========
+
+#define IS31FL3737_I2C_ADDRESS_GND 0x50
+#define IS31FL3737_I2C_ADDRESS_SCL 0x55
+#define IS31FL3737_I2C_ADDRESS_SDA 0x5A
+#define IS31FL3737_I2C_ADDRESS_VCC 0x5F
+
typedef struct is31_led {
uint8_t driver : 2;
uint8_t r;
@@ -49,14 +86,20 @@ void is31fl3737_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index);
void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL
-#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL
-#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL
-#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL
-#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL
-#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_0R 0x00 // No PUR resistor
+#define IS31FL3737_PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_16KR 0x06 // 16k Ohm resistor in t_NOL
+#define IS31FL3737_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+
+#define IS31FL3737_PWM_FREQUENCY_8K4_HZ 0b000
+#define IS31FL3737_PWM_FREQUENCY_4K2_HZ 0b001
+#define IS31FL3737_PWM_FREQUENCY_26K7_HZ 0b010
+#define IS31FL3737_PWM_FREQUENCY_2K1_HZ 0b011
+#define IS31FL3737_PWM_FREQUENCY_1K05_HZ 0b100
#define A_1 0x00
#define A_2 0x01
diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c
index 70671c2a40..f34e0b87a1 100644
--- a/drivers/led/issi/is31fl3741.c
+++ b/drivers/led/issi/is31fl3741.c
@@ -17,63 +17,58 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "wait.h"
-
#include "is31fl3741.h"
#include <string.h>
#include "i2c_master.h"
-#include "progmem.h"
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x60
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-#define ISSI_IDREGISTER 0xFC
-
-#define ISSI_PAGE_PWM0 0x00 // PG0
-#define ISSI_PAGE_PWM1 0x01 // PG1
-#define ISSI_PAGE_SCALING_0 0x02 // PG2
-#define ISSI_PAGE_SCALING_1 0x03 // PG3
-#define ISSI_PAGE_FUNCTION 0x04 // PG4
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG4
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG4
-#define ISSI_REG_PULLDOWNUP 0x02 // PG4
-#define ISSI_REG_RESET 0x3F // PG4
-
-#ifndef ISSI_TIMEOUT
-# define ISSI_TIMEOUT 100
+#include "wait.h"
+
+#define IS31FL3741_COMMANDREGISTER 0xFD
+#define IS31FL3741_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3741_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3741_INTERRUPTSTATUSREGISTER 0xF1
+#define IS31FL3741_IDREGISTER 0xFC
+
+#define IS31FL3741_PAGE_PWM0 0x00 // PG0
+#define IS31FL3741_PAGE_PWM1 0x01 // PG1
+#define IS31FL3741_PAGE_SCALING_0 0x02 // PG2
+#define IS31FL3741_PAGE_SCALING_1 0x03 // PG3
+#define IS31FL3741_PAGE_FUNCTION 0x04 // PG4
+
+#define IS31FL3741_REG_CONFIGURATION 0x00 // PG4
+#define IS31FL3741_REG_GLOBALCURRENT 0x01 // PG4
+#define IS31FL3741_REG_PULLDOWNUP 0x02 // PG4
+#define IS31FL3741_REG_PWM_FREQUENCY 0x36 // PG4
+#define IS31FL3741_REG_RESET 0x3F // PG4
+
+#ifndef IS31FL3741_I2C_TIMEOUT
+# define IS31FL3741_I2C_TIMEOUT 100
+#endif
+
+#ifndef IS31FL3741_I2C_PERSISTENCE
+# define IS31FL3741_I2C_PERSISTENCE 0
+#endif
+
+#ifndef IS31FL3741_CONFIGURATION
+# define IS31FL3741_CONFIGURATION 0x01
#endif
-#ifndef ISSI_PERSISTENCE
-# define ISSI_PERSISTENCE 0
+#ifndef IS31FL3741_PWM_FREQUENCY
+# define IS31FL3741_PWM_FREQUENCY IS31FL3741_PWM_FREQUENCY_29K_HZ
#endif
-#ifndef ISSI_SWPULLUP
-# define ISSI_SWPULLUP PUR_32KR
+#ifndef IS31FL3741_SWPULLUP
+# define IS31FL3741_SWPULLUP IS31FL3741_PUR_32KR
#endif
-#ifndef ISSI_CSPULLUP
-# define ISSI_CSPULLUP PUR_32KR
+#ifndef IS31FL3741_CSPULLUP
+# define IS31FL3741_CSPULLUP IS31FL3741_PUR_32KR
#endif
-#ifndef ISSI_GLOBALCURRENT
-# define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3741_GLOBALCURRENT
+# define IS31FL3741_GLOBALCURRENT 0xFF
#endif
-#define ISSI_MAX_LEDS 351
+#define IS31FL3741_MAX_LEDS 351
// Transfer buffer for TWITransmitData()
uint8_t g_twi_transfer_buffer[20] = {0xFF};
@@ -84,22 +79,22 @@ uint8_t g_twi_transfer_buffer[20] = {0xFF};
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3741_write_pwm_buffer() but it's
// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
-bool g_scaling_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3741_DRIVER_COUNT][IS31FL3741_MAX_LEDS];
+bool g_pwm_buffer_update_required[IS31FL3741_DRIVER_COUNT] = {false};
+bool g_scaling_registers_update_required[IS31FL3741_DRIVER_COUNT] = {false};
-uint8_t g_scaling_registers[DRIVER_COUNT][ISSI_MAX_LEDS];
+uint8_t g_scaling_registers[IS31FL3741_DRIVER_COUNT][IS31FL3741_MAX_LEDS];
void is31fl3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3741_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
}
#else
- i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
#endif
}
@@ -109,21 +104,21 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
for (int i = 0; i < 342; i += 18) {
if (i == 180) {
// unlock the command register and select PG1
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM1);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM1);
}
g_twi_transfer_buffer[0] = i % 180;
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
+#if IS31FL3741_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -133,14 +128,14 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
g_twi_transfer_buffer[0] = 162;
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + 342, 9);
-#if ISSI_PERSISTENCE > 0
- for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
+#if IS31FL3741_I2C_PERSISTENCE > 0
+ for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
- if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@@ -156,18 +151,20 @@ void is31fl3741_init(uint8_t addr) {
// Unlock the command register.
// Unlock the command register.
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG4
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_FUNCTION);
// Set to Normal operation
- is31fl3741_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
+ is31fl3741_write_register(addr, IS31FL3741_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
// Set Golbal Current Control Register
- is31fl3741_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+ is31fl3741_write_register(addr, IS31FL3741_REG_GLOBALCURRENT, IS31FL3741_GLOBALCURRENT);
// Set Pull up & Down for SWx CSy
- is31fl3741_write_register(addr, ISSI_REG_PULLDOWNUP, ((ISSI_CSPULLUP << 4) | ISSI_SWPULLUP));
+ is31fl3741_write_register(addr, IS31FL3741_REG_PULLDOWNUP, ((IS31FL3741_CSPULLUP << 4) | IS31FL3741_SWPULLUP));
+ // Set PWM frequency
+ is31fl3741_write_register(addr, IS31FL3741_REG_PWM_FREQUENCY, (IS31FL3741_PWM_FREQUENCY & 0b1111));
// is31fl3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
@@ -224,8 +221,8 @@ void is31fl3741_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// unlock the command register and select PG2
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM0);
is31fl3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
}
@@ -244,8 +241,8 @@ void is31fl3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green,
void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_scaling_registers_update_required[index]) {
// unlock the command register and select PG2
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_0);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_0);
// CS1_SW1 to CS30_SW6 are on PG2
for (int i = CS1_SW1; i <= CS30_SW6; ++i) {
@@ -253,8 +250,8 @@ void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
}
// unlock the command register and select PG3
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
- is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_1);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+ is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_1);
// CS1_SW7 to CS39_SW9 are on PG3
for (int i = CS1_SW7; i <= CS39_SW9; ++i) {
diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h
index 4ae84dc3c6..65f8af98c8 100644
--- a/drivers/led/issi/is31fl3741.h
+++ b/drivers/led/issi/is31fl3741.h
@@ -23,6 +23,44 @@
#include <stdbool.h>
#include "progmem.h"
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+# define IS31FL3741_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+# define IS31FL3741_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+# define IS31FL3741_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_CONFIGURATION
+# define IS31FL3741_CONFIGURATION ISSI_CONFIGURATION
+#endif
+#ifdef ISSI_SWPULLUP
+# define IS31FL3741_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+# define IS31FL3741_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+# define IS31FL3741_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3741_PUR_0R
+#define PUR_05KR IS31FL3741_PUR_05KR
+#define PUR_1KR IS31FL3741_PUR_1KR
+#define PUR_2KR IS31FL3741_PUR_2KR
+#define PUR_4KR IS31FL3741_PUR_4KR
+#define PUR_8KR IS31FL3741_PUR_8KR
+#define PUR_16KR IS31FL3741_PUR_16KR
+#define PUR_32KR IS31FL3741_PUR_32KR
+// ========
+
+#define IS31FL3741_I2C_ADDRESS_GND 0x30
+#define IS31FL3741_I2C_ADDRESS_SCL 0x31
+#define IS31FL3741_I2C_ADDRESS_SDA 0x32
+#define IS31FL3741_I2C_ADDRESS_VCC 0x33
+
typedef struct is31_led {
uint32_t driver : 2;
uint32_t r : 10;
@@ -51,14 +89,19 @@ void is31fl3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t
void is31fl3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor
-#define PUR_1KR 0x02 // 1.0k Ohm resistor
-#define PUR_2KR 0x03 // 2.0k Ohm resistor
-#define PUR_4KR 0x04 // 4.0k Ohm resistor
-#define PUR_8KR 0x05 // 8.0k Ohm resistor
-#define PUR_16KR 0x06 // 16k Ohm resistor
-#define PUR_32KR 0x07 // 32k Ohm resistor
+#define IS31FL3741_PUR_0R 0x00 // No PUR resistor
+#define IS31FL3741_PUR_05KR 0x01 // 0.5k Ohm resistor
+#define IS31FL3741_PUR_1KR 0x02 // 1.0k Ohm resistor
+#define IS31FL3741_PUR_2KR 0x03 // 2.0k Ohm resistor
+#define IS31FL3741_PUR_4KR 0x04 // 4.0k Ohm resistor
+#define IS31FL3741_PUR_8KR 0x05 // 8.0k Ohm resistor
+#define IS31FL3741_PUR_16KR 0x06 // 16k Ohm resistor
+#define IS31FL3741_PUR_32KR 0x07 // 32k Ohm resistor
+
+#define IS31FL3741_PWM_FREQUENCY_29K_HZ 0b0000
+#define IS31FL3741_PWM_FREQUENCY_3K6_HZ 0b0011
+#define IS31FL3741_PWM_FREQUENCY_1K8_HZ 0b0111
+#define IS31FL3741_PWM_FREQUENCY_900_HZ 0b1011
#define CS1_SW1 0x00
#define CS2_SW1 0x01
diff --git a/drivers/led/issi/is31flcommon.h b/drivers/led/issi/is31flcommon.h
index 4b3add558b..93533e14de 100644
--- a/drivers/led/issi/is31flcommon.h
+++ b/drivers/led/issi/is31flcommon.h
@@ -25,13 +25,13 @@
#include "progmem.h"
// Which variant header file to use
-#ifdef IS31FL3742A
+#if defined(LED_MATRIX_IS31FL3742A) || defined(RGB_MATRIX_IS31FL3742A)
# include "is31fl3742.h"
-#elif defined(IS31FL3743A)
+#elif defined(LED_MATRIX_IS31FL3743A) || defined(RGB_MATRIX_IS31FL3743A)
# include "is31fl3743.h"
-#elif defined(IS31FL3745)
+#elif defined(LED_MATRIX_IS31FL3745) || defined(RGB_MATRIX_IS31FL3745)
# include "is31fl3745.h"
-#elif defined(IS31FL3746A)
+#elif defined(LED_MATRIX_IS31FL3746A) || defined(RGB_MATRIX_IS31FL3746A)
# include "is31fl3746.h"
#endif