diff options
Diffstat (limited to 'drivers/led/issi/is31fl3731-mono.c')
-rw-r--r-- | drivers/led/issi/is31fl3731-mono.c | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/drivers/led/issi/is31fl3731-mono.c b/drivers/led/issi/is31fl3731-mono.c new file mode 100644 index 0000000000..ca4e3449b2 --- /dev/null +++ b/drivers/led/issi/is31fl3731-mono.c @@ -0,0 +1,224 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2019 Clueboard + * Copyright 2021 Doni Crosby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31fl3731-mono.h" +#include "i2c_master.h" +#include "wait.h" + +#define IS31FL3731_PWM_REGISTER_COUNT 144 +#define IS31FL3731_LED_CONTROL_REGISTER_COUNT 18 + +#ifndef IS31FL3731_I2C_TIMEOUT +# define IS31FL3731_I2C_TIMEOUT 100 +#endif + +#ifndef IS31FL3731_I2C_PERSISTENCE +# define IS31FL3731_I2C_PERSISTENCE 0 +#endif + +// These buffers match the IS31FL3731 PWM registers 0x24-0xB3. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in is31fl3731_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[IS31FL3731_DRIVER_COUNT][IS31FL3731_PWM_REGISTER_COUNT]; +bool g_pwm_buffer_update_required[IS31FL3731_DRIVER_COUNT] = {false}; + +uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][IS31FL3731_LED_CONTROL_REGISTER_COUNT] = {0}; +bool g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT] = {false}; + +void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) { +#if IS31FL3731_I2C_PERSISTENCE > 0 + for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) { + if (i2c_write_register(addr << 1, reg, &data, 1, IS31FL3731_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break; + } +#else + i2c_write_register(addr << 1, reg, &data, 1, IS31FL3731_I2C_TIMEOUT); +#endif +} + +void is31fl3731_select_page(uint8_t addr, uint8_t page) { + is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, page); +} + +void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t index) { + // Assumes page 0 is already selected. + // Transmit PWM registers in 9 transfers of 16 bytes. + + // Iterate over the pwm_buffer contents at 16 byte intervals. + for (uint8_t i = 0; i < IS31FL3731_PWM_REGISTER_COUNT; i += 16) { +#if IS31FL3731_I2C_PERSISTENCE > 0 + for (uint8_t j = 0; j < IS31FL3731_I2C_PERSISTENCE; j++) { + if (i2c_write_register(addr << 1, IS31FL3731_FRAME_REG_PWM + i, g_pwm_buffer[index] + i, 16, IS31FL3731_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break; + } +#else + i2c_write_register(addr << 1, IS31FL3731_FRAME_REG_PWM + i, g_pwm_buffer[index] + i, 16, IS31FL3731_I2C_TIMEOUT); +#endif + } +} + +void is31fl3731_init_drivers(void) { + i2c_init(); + + is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); +#if defined(IS31FL3731_I2C_ADDRESS_2) + is31fl3731_init(IS31FL3731_I2C_ADDRESS_2); +# if defined(IS31FL3731_I2C_ADDRESS_3) + is31fl3731_init(IS31FL3731_I2C_ADDRESS_3); +# if defined(IS31FL3731_I2C_ADDRESS_4) + is31fl3731_init(IS31FL3731_I2C_ADDRESS_4); +# endif +# endif +#endif + + for (int i = 0; i < IS31FL3731_LED_COUNT; i++) { + is31fl3731_set_led_control_register(i, true); + } + + is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_1, 0); +#if defined(IS31FL3731_I2C_ADDRESS_2) + is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_2, 1); +# if defined(IS31FL3731_I2C_ADDRESS_3) + is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_3, 2); +# if defined(IS31FL3731_I2C_ADDRESS_4) + is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_4, 3); +# endif +# endif +#endif +} + +void is31fl3731_init(uint8_t addr) { + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, first enable software shutdown, + // then set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + is31fl3731_select_page(addr, IS31FL3731_COMMAND_FUNCTION); + + // enable software shutdown + is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_SHUTDOWN, 0x00); +#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array + is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_GHOST_IMAGE_PREVENTION, IS31FL3731_GHOST_IMAGE_PREVENTION_GEN); +#endif + + // this delay was copied from other drivers, might not be needed + wait_ms(10); + + // picture mode + is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_CONFIG, IS31FL3731_CONFIG_MODE_PICTURE); + // display frame 0 + is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_PICTURE_DISPLAY, 0x00); + // audio sync off + is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_AUDIO_SYNC, 0x00); + + is31fl3731_select_page(addr, IS31FL3731_COMMAND_FRAME_1); + + // turn off all LEDs in the LED control register + for (uint8_t i = 0; i < IS31FL3731_LED_CONTROL_REGISTER_COUNT; i++) { + is31fl3731_write_register(addr, IS31FL3731_FRAME_REG_LED_CONTROL + i, 0x00); + } + + // turn off all LEDs in the blink control register (not really needed) + for (uint8_t i = 0; i < IS31FL3731_LED_CONTROL_REGISTER_COUNT; i++) { + is31fl3731_write_register(addr, IS31FL3731_FRAME_REG_BLINK_CONTROL + i, 0x00); + } + + // set PWM on all LEDs to 0 + for (uint8_t i = 0; i < IS31FL3731_PWM_REGISTER_COUNT; i++) { + is31fl3731_write_register(addr, IS31FL3731_FRAME_REG_PWM + i, 0x00); + } + + is31fl3731_select_page(addr, IS31FL3731_COMMAND_FUNCTION); + + // disable software shutdown + is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_SHUTDOWN, 0x01); + + // select page 0 and leave it selected. + // most usage after initialization is just writing PWM buffers in page 0 + // as there's not much point in double-buffering + is31fl3731_select_page(addr, IS31FL3731_COMMAND_FRAME_1); +} + +void is31fl3731_set_value(int index, uint8_t value) { + is31fl3731_led_t led; + + if (index >= 0 && index < IS31FL3731_LED_COUNT) { + memcpy_P(&led, (&g_is31fl3731_leds[index]), sizeof(led)); + + if (g_pwm_buffer[led.driver][led.v] == value) { + return; + } + + g_pwm_buffer[led.driver][led.v] = value; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void is31fl3731_set_value_all(uint8_t value) { + for (int i = 0; i < IS31FL3731_LED_COUNT; i++) { + is31fl3731_set_value(i, value); + } +} + +void is31fl3731_set_led_control_register(uint8_t index, bool value) { + is31fl3731_led_t led; + memcpy_P(&led, (&g_is31fl3731_leds[index]), sizeof(led)); + + uint8_t control_register = led.v / 8; + uint8_t bit_value = led.v % 8; + + if (value) { + g_led_control_registers[led.driver][control_register] |= (1 << bit_value); + } else { + g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void is31fl3731_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + is31fl3731_write_pwm_buffer(addr, index); + + g_pwm_buffer_update_required[index] = false; + } +} + +void is31fl3731_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + for (uint8_t i = 0; i < IS31FL3731_LED_CONTROL_REGISTER_COUNT; i++) { + is31fl3731_write_register(addr, i, g_led_control_registers[index][i]); + } + + g_led_control_registers_update_required[index] = false; + } +} + +void is31fl3731_flush(void) { + is31fl3731_update_pwm_buffers(IS31FL3731_I2C_ADDRESS_1, 0); +#if defined(IS31FL3731_I2C_ADDRESS_2) + is31fl3731_update_pwm_buffers(IS31FL3731_I2C_ADDRESS_2, 1); +# if defined(IS31FL3731_I2C_ADDRESS_3) + is31fl3731_update_pwm_buffers(IS31FL3731_I2C_ADDRESS_3, 2); +# if defined(IS31FL3731_I2C_ADDRESS_4) + is31fl3731_update_pwm_buffers(IS31FL3731_I2C_ADDRESS_4, 3); +# endif +# endif +#endif +} |