diff options
Diffstat (limited to 'drivers/led/aw20216s.c')
| -rw-r--r-- | drivers/led/aw20216s.c | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/drivers/led/aw20216s.c b/drivers/led/aw20216s.c new file mode 100644 index 0000000000..078a694d30 --- /dev/null +++ b/drivers/led/aw20216s.c @@ -0,0 +1,168 @@ +/* Copyright 2021 Jasper Chan + * 2023 Huckies <https://github.com/Huckies> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "aw20216s.h" +#include "wait.h" +#include "spi_master.h" + +/* The AW20216S appears to be somewhat similar to the IS31FL743, although quite + * a few things are different, such as the command byte format and page ordering. + * The LED addresses start from 0x00 instead of 0x01. + */ +#define AW20216S_ID 0b1010 << 4 + +#define AW20216S_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers +#define AW20216S_PAGE_PWM 0x01 << 1 // PG1, LED PWM control +#define AW20216S_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control +#define AW20216S_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? +#define AW20216S_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? + +#define AW20216S_WRITE 0 +#define AW20216S_READ 1 + +#define AW20216S_REG_CONFIGURATION 0x00 // PG0 +#define AW20216S_REG_GLOBALCURRENT 0x01 // PG0 +#define AW20216S_REG_RESET 0x2F // PG0 +#define AW20216S_REG_MIXFUNCTION 0x46 // PG0 + +// Default value of AW20216S_REG_CONFIGURATION +// D7:D4 = 1011, SWSEL (SW1~SW12 active) +// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter) +// D2:D1 = 00, OSDE (open/short detection enable) +// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high) +#define AW20216S_CONFIG_DEFAULT 0b10110000 +#define AW20216S_MIXCR_DEFAULT 0b00000000 +#define AW20216S_RESET_CMD 0xAE +#define AW20216S_CHIPEN 1 +#define AW20216S_LPEN (0x01 << 1) + +#define AW20216S_PWM_REGISTER_COUNT 216 + +#ifndef AW20216S_SCALING_MAX +# define AW20216S_SCALING_MAX 150 +#endif + +#ifndef AW20216S_GLOBAL_CURRENT_MAX +# define AW20216S_GLOBAL_CURRENT_MAX 150 +#endif + +#ifndef AW20216S_SPI_MODE +# define AW20216S_SPI_MODE 0 +#endif + +#ifndef AW20216S_SPI_DIVISOR +# define AW20216S_SPI_DIVISOR 4 +#endif + +uint8_t g_pwm_buffer[AW20216S_DRIVER_COUNT][AW20216S_PWM_REGISTER_COUNT]; +bool g_pwm_buffer_update_required[AW20216S_DRIVER_COUNT] = {false}; + +bool aw20216s_write(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t* data, uint8_t len) { + static uint8_t s_spi_transfer_buffer[2] = {0}; + + if (!spi_start(cs_pin, false, AW20216S_SPI_MODE, AW20216S_SPI_DIVISOR)) { + spi_stop(); + return false; + } + + s_spi_transfer_buffer[0] = (AW20216S_ID | page | AW20216S_WRITE); + s_spi_transfer_buffer[1] = reg; + + if (spi_transmit(s_spi_transfer_buffer, 2) != SPI_STATUS_SUCCESS) { + spi_stop(); + return false; + } + + if (spi_transmit(data, len) != SPI_STATUS_SUCCESS) { + spi_stop(); + return false; + } + + spi_stop(); + return true; +} + +static inline bool aw20216s_write_register(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t value) { + // Little wrapper so callers need not care about sending a buffer + return aw20216s_write(cs_pin, page, reg, &value, 1); +} + +void aw20216s_soft_reset(pin_t cs_pin) { + aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_RESET, AW20216S_RESET_CMD); +} + +static void aw20216s_init_scaling(pin_t cs_pin) { + // Set constant current to the max, control brightness with PWM + for (uint8_t i = 0; i < AW20216S_PWM_REGISTER_COUNT; i++) { + aw20216s_write_register(cs_pin, AW20216S_PAGE_SCALING, i, AW20216S_SCALING_MAX); + } +} + +static inline void aw20216s_init_current_limit(pin_t cs_pin) { + // Push config + aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_GLOBALCURRENT, AW20216S_GLOBAL_CURRENT_MAX); +} + +static inline void aw20216s_soft_enable(pin_t cs_pin) { + // Push config + aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_CONFIGURATION, AW20216S_CONFIG_DEFAULT | AW20216S_CHIPEN); +} + +static inline void aw20216s_auto_lowpower(pin_t cs_pin) { + aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_MIXFUNCTION, AW20216S_MIXCR_DEFAULT | AW20216S_LPEN); +} + +void aw20216s_init(pin_t cs_pin, pin_t en_pin) { + setPinOutput(en_pin); + writePinHigh(en_pin); + + aw20216s_soft_reset(cs_pin); + wait_ms(2); + + // Drivers should start with all scaling and PWM registers as off + aw20216s_init_current_limit(cs_pin); + aw20216s_init_scaling(cs_pin); + + aw20216s_soft_enable(cs_pin); + aw20216s_auto_lowpower(cs_pin); +} + +void aw20216s_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + aw20216s_led_t led; + memcpy_P(&led, (&g_aw20216s_leds[index]), sizeof(led)); + + if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { + return; + } + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required[led.driver] = true; +} + +void aw20216s_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (uint8_t i = 0; i < RGB_MATRIX_LED_COUNT; i++) { + aw20216s_set_color(i, red, green, blue); + } +} + +void aw20216s_update_pwm_buffers(pin_t cs_pin, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + aw20216s_write(cs_pin, AW20216S_PAGE_PWM, 0, g_pwm_buffer[index], AW20216S_PWM_REGISTER_COUNT); + } + g_pwm_buffer_update_required[index] = false; +} |