summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/eeprom_driver.md12
-rw-r--r--docs/feature_backlight.md1
-rw-r--r--docs/feature_led_matrix.md8
-rw-r--r--docs/feature_oled_driver.md56
-rw-r--r--docs/feature_rgb_matrix.md158
-rw-r--r--docs/feature_rgblight.md6
-rw-r--r--docs/reference_info_json.md9
7 files changed, 151 insertions, 99 deletions
diff --git a/docs/eeprom_driver.md b/docs/eeprom_driver.md
index 50d8bcb7b3..34b6f51cbe 100644
--- a/docs/eeprom_driver.md
+++ b/docs/eeprom_driver.md
@@ -105,11 +105,11 @@ Configurable options in your keyboard's `config.h`:
`config.h` override | Default | Description
-----------------------------------------|-------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-`#define WEAR_LEVELING_EFL_FIRST_SECTOR` | _unset_ | The first sector on the MCU to use. By default this is not defined and calculated at runtime based on the MCU. However, different flash sizes on MCUs may require custom configuration.
-`#define WEAR_LEVELING_EFL_FLASH_SIZE` | _unset_ | Allows overriding the flash size available for use for wear-leveling. Under normal circumstances this is automatically calculated and should not need to be overridden. Specifying a size larger than the amount actually available in flash will usually prevent the MCU from booting.
-`#define WEAR_LEVELING_LOGICAL_SIZE` | `1024` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
-`#define WEAR_LEVELING_BACKING_SIZE` | `2048` | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
-`#define BACKING_STORE_WRITE_SIZE` | _automatic_ | The byte width of the underlying write used on the MCU, and is usually automatically determined from the selected MCU family. If an error occurs in the auto-detection, you'll need to consult the MCU's datasheet and determine this value, specifying it directly.
+`#define WEAR_LEVELING_EFL_FIRST_SECTOR` | _unset_ | The first sector on the MCU to use. By default this is not defined and calculated at runtime based on the MCU. However, different flash sizes on MCUs may require custom configuration.
+`#define WEAR_LEVELING_EFL_FLASH_SIZE` | _unset_ | Allows overriding the flash size available for use for wear-leveling. Under normal circumstances this is automatically calculated and should not need to be overridden. Specifying a size larger than the amount actually available in flash will usually prevent the MCU from booting.
+`#define WEAR_LEVELING_LOGICAL_SIZE` | `(backing_size/2)` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
+`#define WEAR_LEVELING_BACKING_SIZE` | `2048` | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
+`#define BACKING_STORE_WRITE_SIZE` | _automatic_ | The byte width of the underlying write used on the MCU, and is usually automatically determined from the selected MCU family. If an error occurs in the auto-detection, you'll need to consult the MCU's datasheet and determine this value, specifying it directly.
!> If your MCU does not boot after swapping to the EFL wear-leveling driver, it's likely that the flash size is incorrectly detected, usually as an MCU with larger flash and may require overriding.
@@ -139,7 +139,7 @@ Configurable options in your keyboard's `config.h`:
------------------------------------------|----------------------------|--------------------------------------------------------------------------------------------------------------------------------
`#define WEAR_LEVELING_RP2040_FLASH_SIZE` | `PICO_FLASH_SIZE_BYTES` | Number of bytes of flash on the board.
`#define WEAR_LEVELING_RP2040_FLASH_BASE` | `(flash_size-sector_size)` | The byte-wise location that the backing storage should be located.
-`#define WEAR_LEVELING_LOGICAL_SIZE` | `4096` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
+`#define WEAR_LEVELING_LOGICAL_SIZE` | `(backing_size/2)` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
`#define WEAR_LEVELING_BACKING_SIZE` | `8192` | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size as well as the sector size.
`#define BACKING_STORE_WRITE_SIZE` | `2` | The write width used whenever a write is performed on the external flash peripheral.
diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md
index d032c33f18..2f9381e3dc 100644
--- a/docs/feature_backlight.md
+++ b/docs/feature_backlight.md
@@ -39,6 +39,7 @@ Add the following to your `config.h`:
|`BACKLIGHT_LIMIT_VAL` |`255` |The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum.|
|`BACKLIGHT_DEFAULT_LEVEL` |`BACKLIGHT_LEVELS`|The default backlight level to use upon clearing the EEPROM |
|`BACKLIGHT_DEFAULT_BREATHING`|*Not defined* |Whether to enable backlight breathing upon clearing the EEPROM |
+|`BACKLIGHT_PWM_PERIOD` |2048Hz |Defaults to `BACKLIGHT_PWM_COUNTER_FREQUENCY / 2048`, which results in a PWM frequency of 2048Hz. |
Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.
diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md
index fd56a45725..b22d4ad3a3 100644
--- a/docs/feature_led_matrix.md
+++ b/docs/feature_led_matrix.md
@@ -19,9 +19,9 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>
| Variable | Description | Default |
|----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3731_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
| `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
@@ -41,7 +41,7 @@ Here is an example using 2 drivers.
#define LED_DRIVER_ADDR_1 0b1110100
#define LED_DRIVER_ADDR_2 0b1110110
-#define LED_DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
#define LED_DRIVER_1_LED_TOTAL 25
#define LED_DRIVER_2_LED_TOTAL 24
#define LED_MATRIX_LED_COUNT (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)
diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md
index f3769742f8..3b6b4e7a1e 100644
--- a/docs/feature_oled_driver.md
+++ b/docs/feature_oled_driver.md
@@ -166,6 +166,42 @@ bool oled_task_user(void) {
#endif
```
+Render a message before booting into bootloader mode.
+```c
+void oled_render_boot(bool bootloader) {
+ oled_clear();
+ for (int i = 0; i < 16; i++) {
+ oled_set_cursor(0, i);
+ if (bootloader) {
+ oled_write_P(PSTR("Awaiting New Firmware "), false);
+ } else {
+ oled_write_P(PSTR("Rebooting "), false);
+ }
+ }
+
+ oled_render_dirty(true);
+}
+
+bool reboot = false;
+
+bool uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+
+ // Display a special message prior to rebooting...
+ if (keycode == QK_BOOT) {
+ reboot = true;
+ }
+ }
+
+ return true;
+}
+
+void shutdown_user(void) {
+ oled_render_boot(reboot);
+}
+
+```
+
## Basic Configuration
These configuration options should be placed in `config.h`. Example:
@@ -275,7 +311,7 @@ Rotation on SH1106 and SH1107 is noticeably less efficient than on SSD1306, beca
## OLED API
```c
-// OLED rotation enum values are flags
+// OLED Rotation enum values are flags
typedef enum {
OLED_ROTATION_0 = 0,
OLED_ROTATION_90 = 1,
@@ -283,7 +319,7 @@ typedef enum {
OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180
} oled_rotation_t;
-// Initialize the OLED display, rotating the rendered output based on the define passed in.
+// Initialize the oled display, rotating the rendered output based on the define passed in.
// Returns true if the OLED was initialized successfully
bool oled_init(oled_rotation_t rotation);
@@ -301,8 +337,12 @@ bool oled_send_data(const uint8_t *data, uint16_t size);
// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering
void oled_clear(void);
-// Renders the dirty chunks of the buffer to OLED display
-void oled_render(void);
+// Alias to oled_render_dirty to avoid a change in api.
+#define oled_render() oled_render_dirty(false)
+
+// Renders all dirty blocks to the display at one time or a subset depending on the value of
+// all.
+void oled_render_dirty(bool all);
// Moves cursor to character position indicated by column and line, wraps if out of bounds
// Max column denoted by 'oled_max_chars()' and max lines by 'oled_max_lines()' functions
@@ -333,8 +373,6 @@ void oled_write_ln(const char *data, bool invert);
// Pans the buffer to the right (or left by passing true) by moving contents of the buffer
// Useful for moving the screen in preparation for new drawing
-// oled_scroll_left or oled_scroll_right should be preferred for all cases of moving a static
-// image such as a logo or to avoid burn-in as it's much, much less cpu intensive
void oled_pan(bool left);
// Returns a pointer to the requested start index in the buffer plus remaining
@@ -351,6 +389,7 @@ void oled_write_raw_byte(const char data, uint16_t index);
// Coordinates start at top-left and go right and down for positive x and y
void oled_write_pixel(uint8_t x, uint8_t y, bool on);
+#if defined(__AVR__)
// Writes a PROGMEM string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true
// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM
@@ -364,6 +403,11 @@ void oled_write_ln_P(const char *data, bool invert);
// Writes a PROGMEM string to the buffer at current cursor position
void oled_write_raw_P(const char *data, uint16_t size);
+#else
+# define oled_write_P(data, invert) oled_write(data, invert)
+# define oled_write_ln_P(data, invert) oled_write_ln(data, invert)
+# define oled_write_raw_P(data, size) oled_write_raw(data, size)
+#endif // defined(__AVR__)
// Can be used to manually turn on the screen if it is off
// Returns true if the screen was on or turns on
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 44899d70d9..a8f4f346d6 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -19,10 +19,10 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_<N>` de
| Variable | Description | Default |
|----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | |
+| `IS31FL3731_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
@@ -42,7 +42,7 @@ Here is an example using 2 drivers.
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 25
#define DRIVER_2_LED_TOTAL 24
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -83,13 +83,13 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
| Variable | Description | Default |
|----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 |
-| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
-| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3733_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3733_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3733_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 |
+| `IS31FL3733_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `IS31FL3733_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3733_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3733_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
@@ -100,17 +100,17 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
| `DRIVER_SYNC_3` | (Optional) Sync configuration for the third RGB driver | 0 |
| `DRIVER_SYNC_4` | (Optional) Sync configuration for the fourth RGB driver | 0 |
-The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
+The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3733_SWPULLUP`/`IS31FL3733_CSPULLUP` are given the value of `IS31FL3733_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
-| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
+| `IS31FL3733_SWPULLUP/IS31FL3733_CSPULLUP` | Description |
|----------------------|-------------|
-| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
-| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_3KR` | The 3k Ohm resistor used at all times |
-| `PUR_4KR` | The 4k Ohm resistor used at all times |
-| `PUR_8KR` | The 8k Ohm resistor used at all times |
-| `PUR_16KR` | The 16k Ohm resistor used at all times |
-| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3733_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
+| `IS31FL3733_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3733_PUR_3KR` | The 3k Ohm resistor used at all times |
+| `IS31FL3733_PUR_4KR` | The 4k Ohm resistor used at all times |
+| `IS31FL3733_PUR_8KR` | The 8k Ohm resistor used at all times |
+| `IS31FL3733_PUR_16KR` | The 16k Ohm resistor used at all times |
+| `IS31FL3733_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
Here is an example using 2 drivers.
@@ -128,7 +128,7 @@ Here is an example using 2 drivers.
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010011
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 58
#define DRIVER_2_LED_TOTAL 10
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -170,31 +170,31 @@ Configure the hardware via your `config.h`:
| Variable | Description | Default |
|----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 |
-| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
-| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3736_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3736_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3736_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 |
+| `IS31FL3736_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `IS31FL3736_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3736_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3736_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
| `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
| `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
-The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
+The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3736_SWPULLUP`/`IS31FL3736_CSPULLUP` are given the value of `IS31FL3736_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
-| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
+| `IS31FL3736_SWPULLUP/IS31FL3736_CSPULLUP` | Description |
|----------------------|-------------|
-| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
-| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
-| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
-| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
+| `IS31FL3736_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3736_PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3736_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
Here is an example using 2 drivers.
@@ -211,7 +211,7 @@ Here is an example using 2 drivers.
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010001
-#define DRIVER_COUNT 2
+#define IS31FL3736_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 30
#define DRIVER_2_LED_TOTAL 32
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -246,31 +246,31 @@ Configure the hardware via your `config.h`:
| Variable | Description | Default |
|----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 |
-| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
-| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3737_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3737_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3737_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 |
+| `IS31FL3737_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `IS31FL3737_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3737_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3737_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
| `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
| `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
-The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
+The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3737_SWPULLUP`/`IS31FL3737_CSPULLUP` are given the value of `IS31FL3737_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
-| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
+| `IS31FL3737_SWPULLUP/IS31FL3737_CSPULLUP` | Description |
|----------------------|-------------|
-| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
-| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
-| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
-| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
+| `IS31FL3737_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3737_PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3737_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
Here is an example using 2 drivers.
@@ -287,7 +287,7 @@ Here is an example using 2 drivers.
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010001
-#define DRIVER_COUNT 2
+#define IS31FL3737_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 30
#define DRIVER_2_LED_TOTAL 36
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -465,41 +465,41 @@ Configure the hardware via your `config.h`:
```
---
-### AW20216 :id=aw20216
-There is basic support for addressable RGB matrix lighting with the SPI AW20216 RGB controller. To enable it, add this to your `rules.mk`:
+### AW20216S :id=aw20216s
+There is basic support for addressable RGB matrix lighting with the SPI AW20216S RGB controller. To enable it, add this to your `rules.mk`:
```make
RGB_MATRIX_ENABLE = yes
-RGB_MATRIX_DRIVER = aw20216
+RGB_MATRIX_DRIVER = aw20216s
```
-You can use up to 2 AW20216 IC's. Do not specify `DRIVER_<N>_xxx` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+You can use up to 2 AW20216S IC's. Do not specify `DRIVER_<N>_xxx` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
| Variable | Description | Default |
|----------|-------------|---------|
-| `DRIVER_1_CS` | (Required) MCU pin connected to first RGB driver chip select line | B13 |
-| `DRIVER_2_CS` | (Optional) MCU pin connected to second RGB driver chip select line | |
-| `DRIVER_1_EN` | (Required) MCU pin connected to first RGB driver hardware enable line | C13 |
-| `DRIVER_2_EN` | (Optional) MCU pin connected to second RGB driver hardware enable line | |
+| `AW20216S_DRIVER_1_CS` | (Required) MCU pin connected to first RGB driver chip select line | B13 |
+| `AW20216S_DRIVER_2_CS` | (Optional) MCU pin connected to second RGB driver chip select line | |
+| `AW20216S_DRIVER_1_EN` | (Required) MCU pin connected to first RGB driver hardware enable line | C13 |
+| `AW20216S_DRIVER_2_EN` | (Optional) MCU pin connected to second RGB driver hardware enable line | |
| `DRIVER_1_LED_TOTAL` | (Required) How many RGB lights are connected to first RGB driver | |
| `DRIVER_2_LED_TOTAL` | (Optional) How many RGB lights are connected to second RGB driver | |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `AW20216S_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
-| `AW_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 |
-| `AW_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 |
-| `AW_SPI_MODE` | (Optional) Mode for SPI communication (0-3, defines polarity and phase of the clock) | 3 |
-| `AW_SPI_DIVISOR` | (Optional) Clock divisor for SPI communication (powers of 2, smaller numbers means faster communication, should not be less than 4) | 4 |
+| `AW20216S_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 |
+| `AW20216S_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 |
+| `AW20216S_SPI_MODE` | (Optional) Mode for SPI communication (0-3, defines polarity and phase of the clock) | 3 |
+| `AW20216S_SPI_DIVISOR` | (Optional) Clock divisor for SPI communication (powers of 2, smaller numbers means faster communication, should not be less than 4) | 4 |
Here is an example using 2 drivers.
```c
-#define DRIVER_1_CS B13
-#define DRIVER_2_CS B14
+#define AW20216S_DRIVER_1_CS B13
+#define AW20216S_DRIVER_2_CS B14
// Hardware enable lines may be connected to the same pin
-#define DRIVER_1_EN C13
-#define DRIVER_2_EN C13
+#define AW20216S_DRIVER_1_EN C13
+#define AW20216S_DRIVER_2_EN C13
-#define DRIVER_COUNT 2
+#define AW20216S_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 66
#define DRIVER_2_LED_TOTAL 32
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -510,10 +510,10 @@ Here is an example using 2 drivers.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
-const aw_led PROGMEM g_aw_leds[RGB_MATRIX_LED_COUNT] = {
-/* Each AW20216 channel is controlled by a register at some offset between 0x00
+const aw20216s_led PROGMEM g_aw20216s_leds[RGB_MATRIX_LED_COUNT] = {
+/* Each AW20216S channel is controlled by a register at some offset between 0x00
* and 0xD7 inclusive.
- * See drivers/awinic/aw20216.h for the mapping between register offsets and
+ * See drivers/led/aw20216s.h for the mapping between register offsets and
* driver pin locations.
* driver
* | R location
diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md
index 39b7e6a6f1..2bdfe6a7cf 100644
--- a/docs/feature_rgblight.md
+++ b/docs/feature_rgblight.md
@@ -370,9 +370,9 @@ If you need to change your RGB lighting in code, for example in a macro to chang
Example:
```c
-sethsv(HSV_WHITE, (LED_TYPE *)&led[0]); // led 0
-sethsv(HSV_RED, (LED_TYPE *)&led[1]); // led 1
-sethsv(HSV_GREEN, (LED_TYPE *)&led[2]); // led 2
+sethsv(HSV_WHITE, (rgb_led_t *)&led[0]); // led 0
+sethsv(HSV_RED, (rgb_led_t *)&led[1]); // led 1
+sethsv(HSV_GREEN, (rgb_led_t *)&led[2]); // led 2
rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly.
```
diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md
index 91581afc73..9030c99aa6 100644
--- a/docs/reference_info_json.md
+++ b/docs/reference_info_json.md
@@ -202,6 +202,13 @@ Configures the [EEPROM](eeprom_driver.md) driver.
* `driver`
* The EEPROM backend to use. Must be one of `custom`, `i2c`, `legacy_stm32_flash`, `spi`, `transient`, `vendor`, `wear_leveling`.
* Default: `"vendor"`
+ * `wear_leveling`
+ * `driver`
+ * The driver to use. Must be one of `embedded_flash`, `legacy`, `rp2040_flash`, `spi_flash`, `custom`.
+ * `backing_size`
+ * Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
+ * `logical_size`
+ * Number of bytes “exposed” to the rest of QMK and denotes the size of the usable EEPROM.
## Encoder :id=encoder
@@ -523,7 +530,7 @@ Configures the [RGB Matrix](feature_rgb_matrix.md) feature.
* The centroid (geometric center) of the LEDs. Used for certain effects.
* Default: `[112, 32]`
* `driver` (Required)
- * The driver to use. Must be one of `aw20216`, `ckled2001`, `custom`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `ws2812`.
+ * The driver to use. Must be one of `aw20216s`, `ckled2001`, `custom`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `ws2812`.
* `hue_steps`
* The number of hue adjustment steps.
* Default: `8`