summaryrefslogtreecommitdiff
path: root/docs/ws2812_driver.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/ws2812_driver.md')
-rw-r--r--docs/ws2812_driver.md3
1 files changed, 3 insertions, 0 deletions
diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md
index cca6827ec8..fa14f02fdb 100644
--- a/docs/ws2812_driver.md
+++ b/docs/ws2812_driver.md
@@ -102,11 +102,14 @@ Configure the hardware via your config.h:
#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
#define WS2812_PWM_CHANNEL 2 // default: 2
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
```
+Note that using a complementary timer output (TIMx_CHyN) is possible only for advanced-control timers (TIM1, TIM8, TIM20 on STM32), and the `STM32_PWM_USE_ADVANCED` option in mcuconf.h must be set to `TRUE`. Complementary outputs of general-purpose timers are not supported due to ChibiOS limitations.
+
You must also turn on the PWM feature in your halconf.h and mcuconf.h
#### Testing Notes