diff options
Diffstat (limited to 'docs/reference_info_json.md')
| -rw-r--r-- | docs/reference_info_json.md | 170 |
1 files changed, 159 insertions, 11 deletions
diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index 91581afc73..4a70a4bb6f 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -60,6 +60,13 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/<k } ``` * `qmk` + * `locking` + * `enabled` + * Enable locking switch support. + * Default: `false` + * `resync` + * Keep switch state consistent with keyboard LED state. + * Default: `false` * `tap_capslock_delay` * The delay between keydown and keyup for Caps Lock tap events in milliseconds. * Default: `80` (80 ms) @@ -88,7 +95,7 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/<k ## APA102 :id=apa102 -Configures the APA102 driver. +Configures the [APA102](apa102_driver.md) driver. * `apa102` * `clock_pin` (Required) @@ -127,6 +134,16 @@ Configures the [Backlight](feature_backlight.md) feature. * `breathing_period` * The length of one backlight breathing cycle in seconds. * Default: `6` (6 seconds) + * `default` + * `on` + * The default backlight enabled state. + * Default: `true` + * `breathing` + * The default backlight breathing state. + * Default: `false` + * `brightness` + * The default brightness level. + * Default: `max_brightness` * `driver` * The driver to use. Must be one of `custom`, `pwm`, `software`, `timer`. * Default: `"pwm"` @@ -194,6 +211,20 @@ Configures the [Combo](feature_combo.md) feature. * The amount of time to recognize a combo in milliseconds. * Default: `50` (50 ms) +## DIP Switches :id=dip-switch + +Configures the [DIP Switches](feature_dip_switch.md) feature. + +* `dip_switch` + * `enabled` + * Enable the DIP Switches feature. + * Default: `false` + * `pins` + * A list of GPIO pins connected to the MCU. + * `matrix_grid` + * A list of matrix locations in the key matrix. + * Example: `[ [0,6], [1,6], [2,6] ]` + ## EEPROM :id=eeprom Configures the [EEPROM](eeprom_driver.md) driver. @@ -202,6 +233,13 @@ Configures the [EEPROM](eeprom_driver.md) driver. * `driver` * The EEPROM backend to use. Must be one of `custom`, `i2c`, `legacy_stm32_flash`, `spi`, `transient`, `vendor`, `wear_leveling`. * Default: `"vendor"` + * `wear_leveling` + * `driver` + * The driver to use. Must be one of `embedded_flash`, `legacy`, `rp2040_flash`, `spi_flash`, `custom`. + * `backing_size` + * Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size. + * `logical_size` + * Number of bytes “exposed” to the rest of QMK and denotes the size of the usable EEPROM. ## Encoder :id=encoder @@ -313,7 +351,7 @@ Configures the [LED Matrix](feature_led_matrix.md) feature. * Example: ```json { - "alpha_mods": true, + "alphas_mods": true, "breathing": true, "cycle_left_right": false } @@ -321,8 +359,21 @@ Configures the [LED Matrix](feature_led_matrix.md) feature. * `center_point` * The centroid (geometric center) of the LEDs. Used for certain effects. * Default: `[112, 32]` + * `default` + * `animation` + * The default effect. Must be one of `led_matrix.animations` + * Default: `"solid"` + * `on` + * The default enabled state. + * Default: `true` + * `val` + * The default brightness level. + * Default: `max_brightness` + * `speed` + * The default animation speed. + * Default: `128` * `driver` (Required) - * The driver to use. Must be one of `ckled2001`, `custom`, `is31fl3731`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`. + * The driver to use. Must be one of `custom`, `is31fl3218`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`. * `layout` (Required) * List of LED configuration dictionaries. Each dictionary contains: * `flags` (Required) @@ -335,9 +386,21 @@ Configures the [LED Matrix](feature_led_matrix.md) feature. * The key matrix position associated with the LED. * Example: `[0, 2]` * Example: `{"matrix": [2, 1], "x": 20, "y": 48, "flags": 2}` + * `led_flush_limit` + * Limits in milliseconds how frequently an animation will update the LEDs. + * Default: `16` + * `led_process_limit` + * Limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness). + * Default: `led_count / 5` * `max_brightness` * The maximum value which brightness is scaled to, from 0 to 255. * Default: `255` + * `react_on_keyup` + * Animations react to keyup instead of keydown. + * Default: `false` + * `sleep` + * Turn off the LEDs when the host goes to sleep. + * Default: `false` * `speed_steps` * The number of speed adjustment steps. * Default: `16` @@ -466,6 +529,25 @@ Configures the [RGB Lighting](feature_rgblight.md) feature. * `brightness_steps` * The number of brightness adjustment steps. * Default: `17` + * `default` + * `animation` + * The default effect. Must be one of `rgblight.animations` + * Default: `"static_light"` + * `on` + * The default enabled state. + * Default: `true` + * `hue` + * The default hue value. + * Default: `0` + * `sat` + * The default saturation value. + * Default: `255` + * `val` + * The default brightness level. + * Default: `max_brightness` + * `speed` + * The default animation speed. + * Default: `0` * `driver` * The driver to use. Must be one of `apa102`, `custom`, `ws2812`. * Default: `"ws2812"` @@ -514,7 +596,7 @@ Configures the [RGB Matrix](feature_rgb_matrix.md) feature. * Example: ```json { - "alpha_mods": true, + "alphas_mods": true, "breathing": true, "cycle_left_right": false } @@ -522,8 +604,27 @@ Configures the [RGB Matrix](feature_rgb_matrix.md) feature. * `center_point` * The centroid (geometric center) of the LEDs. Used for certain effects. * Default: `[112, 32]` + * `default` + * `animation` + * The default effect. Must be one of `rgb_matrix.animations` + * Default: `"solid_color"` + * `on` + * The default enabled state. + * Default: `true` + * `hue` + * The default hue value. + * Default: `0` + * `sat` + * The default saturation value. + * Default: `255` + * `val` + * The default brightness level. + * Default: `max_brightness` + * `speed` + * The default animation speed. + * Default: `128` * `driver` (Required) - * The driver to use. Must be one of `aw20216`, `ckled2001`, `custom`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `ws2812`. + * The driver to use. Must be one of `aw20216s`, `custom`, `is31fl3218`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`, `ws2812`. * `hue_steps` * The number of hue adjustment steps. * Default: `8` @@ -539,12 +640,24 @@ Configures the [RGB Matrix](feature_rgb_matrix.md) feature. * The key matrix position associated with the LED. * Example: `[0, 2]` * Example: `{"matrix": [2, 1], "x": 20, "y": 48, "flags": 2}` + * `led_flush_limit` + * Limits in milliseconds how frequently an animation will update the LEDs. + * Default: `16` + * `led_process_limit` + * Limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness). + * Default: `led_count / 5` * `max_brightness` * The maximum value which the HSV "V" component is scaled to, from 0 to 255. * Default: `255` + * `react_on_keyup` + * Animations react to keyup instead of keydown. + * Default: `false` * `sat_steps` * The number of saturation adjustment steps. * Default: `16` + * `sleep` + * Turn off the LEDs when the host goes to sleep. + * Default: `false` * `speed_steps` * The number of speed adjustment steps. * Default: `16` @@ -584,6 +697,10 @@ Configures the [Split Keyboard](feature_split_keyboard.md) feature. * `bootmagic` * `matrix` * See [Bootmagic](#bootmagic) config. + * `dip_switch` + * `right` + * `pins` + * See [DIP Switches](#dip-switch) config. * `enabled` * Enable the Split Keyboard feature. * Default: `false` @@ -591,6 +708,12 @@ Configures the [Split Keyboard](feature_split_keyboard.md) feature. * `right` * `rotary` * See [Encoder](#encoder) config. + * `handedness` + * `pin` + * The GPIO pin connected to determine handedness. + * `matrix_grid` + * The GPIO pins of the matrix position which determines the handedness. + * Example: `["A1", "B5"]` * `matrix_pins` * `right` * See [Matrix](#matrix) config. @@ -602,12 +725,37 @@ Configures the [Split Keyboard](feature_split_keyboard.md) feature. * `transport` * `protocol` * The split transport protocol to use. Must be one of `custom`, `i2c`, `serial`, `serial_usart`. - * `sync_matrix_state` - * Mirror the main/primary half's matrix state to the secondary half. - * Default: `false` - * `sync_modifiers` - * Mirror the modifier state to the secondary half. - * Default: `false` + * `sync` + * `activity` + * Mirror the activity timestamps to the secondary half. + * Default: `false` + * `detected_os` + * Mirror the [detected OS](feature_os_detection.md) to the secondary half. + * Default: `false` + * `haptic` + * Mirror the haptic state and process haptic feedback to the secondary half. + * Default: `false` + * `layer_state` + * Mirror the layer state to the secondary half. + * Default: `false` + * `indicators` + * Mirror the indicator state to the secondary half. + * Default: `false` + * `matrix_state` + * Mirror the main/primary half's matrix state to the secondary half. + * Default: `false` + * `modifiers` + * Mirror the modifier state to the secondary half. + * Default: `false` + * `oled` + * Mirror the OLED on/off status to the secondary half. + * Default: `false` + * `st7565` + * Mirror the ST7565 on/off status to the secondary half. + * Default: `false` + * `wpm` + * Mirror the current WPM value to the secondary half. + * Default: `false` * `watchdog` * Reboot the secondary half if it loses connection. * Default: `false` |