summaryrefslogtreecommitdiff
path: root/docs/quantum_painter.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/quantum_painter.md')
-rw-r--r--docs/quantum_painter.md566
1 files changed, 341 insertions, 225 deletions
diff --git a/docs/quantum_painter.md b/docs/quantum_painter.md
index 6d4e2764d4..ed9cec171b 100644
--- a/docs/quantum_painter.md
+++ b/docs/quantum_painter.md
@@ -8,7 +8,7 @@ To enable overall Quantum Painter to be built into your firmware, add the follow
```make
QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = ......
+QUANTUM_PAINTER_DRIVERS += ......
```
You will also likely need to select an appropriate driver in `rules.mk`, which is listed below.
@@ -17,17 +17,18 @@ You will also likely need to select an appropriate driver in `rules.mk`, which i
The QMK CLI can be used to convert from normal images such as PNG files or animated GIFs, as well as fonts from TTF files.
-Hardware supported:
+Supported devices:
-| Display Panel | Panel Type | Size | Comms Transport | Driver |
-|---------------|--------------------|------------------|-----------------|-----------------------------------------|
-| GC9A01 | RGB LCD (circular) | 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = gc9a01_spi` |
-| ILI9163 | RGB LCD | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9163_spi` |
-| ILI9341 | RGB LCD | 240x320 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9341_spi` |
-| ILI9488 | RGB LCD | 320x480 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9488_spi` |
-| SSD1351 | RGB OLED | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ssd1351_spi` |
-| ST7789 | RGB LCD | 240x320, 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = st7789_spi` |
-| ST7735 | RGB LCD | 132x162, 80x160 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = st7735_spi` |
+| Display Panel | Panel Type | Size | Comms Transport | Driver |
+|----------------|--------------------|------------------|-----------------|---------------------------------------------|
+| GC9A01 | RGB LCD (circular) | 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += gc9a01_spi` |
+| ILI9163 | RGB LCD | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += ili9163_spi` |
+| ILI9341 | RGB LCD | 240x320 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += ili9341_spi` |
+| ILI9488 | RGB LCD | 320x480 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += ili9488_spi` |
+| SSD1351 | RGB OLED | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += ssd1351_spi` |
+| ST7735 | RGB LCD | 132x162, 80x160 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += st7735_spi` |
+| ST7789 | RGB LCD | 240x320, 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS += st7789_spi` |
+| RGB565 Surface | Virtual | User-defined | None | `QUANTUM_PAINTER_DRIVERS += rgb565_surface` |
## Quantum Painter Configuration :id=quantum-painter-config
@@ -45,7 +46,9 @@ Drivers have their own set of configurable options, and are described in their r
## Quantum Painter CLI Commands :id=quantum-painter-cli
-### `qmk painter-convert-graphics`
+<!-- tabs:start -->
+
+### ** `qmk painter-convert-graphics` **
This command converts images to a format usable by QMK, i.e. the QGF File Format.
@@ -93,7 +96,7 @@ Writing /home/qmk/qmk_firmware/keyboards/my_keeb/generated/my_image.qgf.h...
Writing /home/qmk/qmk_firmware/keyboards/my_keeb/generated/my_image.qgf.c...
```
-### `qmk painter-make-font-image`
+### ** `qmk painter-make-font-image` **
This command converts a TTF font to an intermediate format for editing, before converting to the QFF File Format.
@@ -126,7 +129,7 @@ The `UNICODE_GLYPHS` argument allows for specifying extra unicode glyphs to gene
$ qmk painter-make-font-image --font NotoSans-ExtraCondensedBold.ttf --size 11 -o noto11.png --unicode-glyphs "ĄȽɂɻɣɈʣ"
```
-### `qmk painter-convert-font-image`
+### ** `qmk painter-convert-font-image` **
This command converts an intermediate font image to the QFF File Format.
@@ -170,6 +173,255 @@ Writing /home/qmk/qmk_firmware/keyboards/my_keeb/generated/noto11.qff.h...
Writing /home/qmk/qmk_firmware/keyboards/my_keeb/generated/noto11.qff.c...
```
+<!-- tabs:end -->
+
+## Quantum Painter Display Drivers :id=quantum-painter-drivers
+
+<!-- tabs:start -->
+
+### ** Common: Standard TFT (SPI + D/C + RST) **
+
+Most TFT display panels use a 5-pin interface -- SPI SCK, SPI MOSI, SPI CS, D/C, and RST pins.
+
+For these displays, QMK's `spi_master` must already be correctly configured for the platform you're building for.
+
+The pin assignments for SPI CS, D/C, and RST are specified during device construction.
+
+<!-- tabs:start -->
+
+#### ** GC9A01 **
+
+Enabling support for the GC9A01 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += gc9a01_spi
+```
+
+Creating a GC9A01 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_gc9a01_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_gc9a01_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define GC9A01_NUM_DEVICES 3
+```
+
+#### ** ILI9163 **
+
+Enabling support for the ILI9163 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += ili9163_spi
+```
+
+Creating a ILI9163 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_ili9163_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_ili9163_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define ILI9163_NUM_DEVICES 3
+```
+
+#### ** ILI9341 **
+
+Enabling support for the ILI9341 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += ili9341_spi
+```
+
+Creating a ILI9341 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_ili9341_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define ILI9341_NUM_DEVICES 3
+```
+
+#### ** ILI9488 **
+
+Enabling support for the ILI9488 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += ili9488_spi
+```
+
+Creating a ILI9488 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_ili9488_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define ILI9488_NUM_DEVICES 3
+```
+
+#### ** SSD1351 **
+
+Enabling support for the SSD1351 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += ssd1351_spi
+```
+
+Creating a SSD1351 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_ssd1351_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_ssd1351_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define SSD1351_NUM_DEVICES 3
+```
+
+#### ** ST7735 **
+
+Enabling support for the ST7735 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += st7735_spi
+```
+
+Creating a ST7735 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_st7735_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define ST7735_NUM_DEVICES 3
+```
+
+!> Some ST7735 devices are known to have different drawing offsets -- despite being a 132x162 pixel display controller internally, some display panels are only 80x160, or smaller. These may require an offset to be applied; see `qp_set_viewport_offsets` above for information on how to override the offsets if they aren't correctly rendered.
+
+#### ** ST7789 **
+
+Enabling support for the ST7789 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += st7789_spi
+```
+
+Creating a ST7789 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_st7789_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_st7789_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define ST7789_NUM_DEVICES 3
+```
+
+!> Some ST7789 devices are known to have different drawing offsets -- despite being a 240x320 pixel display controller internally, some display panels are only 240x240, or smaller. These may require an offset to be applied; see `qp_set_viewport_offsets` above for information on how to override the offsets if they aren't correctly rendered.
+
+<!-- tabs:end -->
+
+### ** Common: Surfaces **
+
+Quantum Painter has surface drivers which are able to target a buffer in RAM. In general, surfaces keep track of the "dirty" region -- the area that has been drawn to since the last flush -- so that when transferring to the display they can transfer the minimal amount of data to achieve the end result.
+
+!> These generally require significant amounts of RAM, so at large sizes and/or higher bit depths, they may not be usable on all MCUs.
+
+<!-- tabs:start -->
+
+#### ** RGB565 Surface **
+
+Enabling support for RGB565 surfaces in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += rgb565_surface
+```
+
+Creating a RGB565 surface in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_rgb565_make_surface(uint16_t panel_width, uint16_t panel_height, void *buffer);
+```
+
+The `buffer` is a user-supplied area of memory, and is assumed to be of the size `sizeof(uint16_t) * panel_width * panel_height`.
+
+The device handle returned from the `qp_rgb565_make_surface` function can be used to perform all other drawing operations.
+
+Example:
+
+```c
+static painter_device_t my_surface;
+static uint16_t my_framebuffer[320 * 240]; // Allocate a buffer for a 320x240 RGB565 display
+void keyboard_post_init_kb(void) {
+ my_surface = qp_rgb565_make_surface(320, 240, my_framebuffer);
+ qp_init(my_surface, QP_ROTATION_0);
+}
+```
+
+The maximum number of RGB565 surfaces can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 surfaces:
+#define RGB565_SURFACE_NUM_DEVICES 3
+```
+
+To transfer the contents of the RGB565 surface to another display, the following API can be invoked:
+
+```c
+bool qp_rgb565_surface_draw(painter_device_t surface, painter_device_t display, uint16_t x, uint16_t y);
+```
+
+The `surface` is the surface to copy out from. The `display` is the target display to draw into. `x` and `y` are the target location to draw the surface pixel data. Under normal circumstances, the location should be consistent, as the dirty region is calculated with respect to the `x` and `y` coordinates -- changing those will result in partial, overlapping draws.
+
+?> Calling `qp_flush()` on the surface resets its dirty region. Copying the surface contents to the display also automatically resets the dirty region.
+
+<!-- tabs:end -->
+
+<!-- tabs:end -->
+
## Quantum Painter Drawing API :id=quantum-painter-api
All APIs require a `painter_device_t` object as their first parameter -- this object comes from the specific device initialisation, and instructions on creating it can be found in each driver's respective section.
@@ -179,7 +431,9 @@ To use any of the APIs, you need to include `qp.h`:
#include <qp.h>
```
-### General Notes :id=quantum-painter-api-general
+<!-- tabs:start -->
+
+### ** General Notes **
The coordinate system used in Quantum Painter generally accepts `left`, `top`, `right`, and `bottom` instead of x/y/width/height, and each coordinate is inclusive of where pixels should be drawn. This is required as some datatypes used by display panels have a maximum value of `255` -- for any value or geometry extent that matches `256`, this would be represented as a `0`, instead.
@@ -193,9 +447,11 @@ All color data matches the standard QMK HSV triplet definitions:
?> Colors used in Quantum Painter are not subject to the RGB lighting CIE curve, if it is enabled.
-### Device Control :id=quantum-painter-api-device-control
+### ** Device Control **
+
+<!-- tabs:start -->
-#### Display Initialisation :id=quantum-painter-api-init
+#### ** Display Initialisation **
```c
bool qp_init(painter_device_t device, painter_rotation_t rotation);
@@ -211,7 +467,7 @@ void keyboard_post_init_kb(void) {
}
```
-#### Display Power :id=quantum-painter-api-power
+#### ** Display Power **
```c
bool qp_power(painter_device_t device, bool power_on);
@@ -242,7 +498,7 @@ void suspend_wakeup_init_user(void) {
}
```
-#### Display Clear :id=quantum-painter-api-clear
+#### ** Display Clear **
```c
bool qp_clear(painter_device_t device);
@@ -250,7 +506,7 @@ bool qp_clear(painter_device_t device);
The `qp_clear` function clears the display's screen.
-#### Display Flush :id=quantum-painter-api-flush
+#### ** Display Flush **
```c
bool qp_flush(painter_device_t device);
@@ -272,9 +528,13 @@ void housekeeping_task_user(void) {
}
```
-### Drawing Primitives :id=quantum-painter-api-primitives
+<!-- tabs:end -->
-#### Set Pixel :id=quantum-painter-api-setpixel
+### ** Drawing Primitives **
+
+<!-- tabs:start -->
+
+#### ** Set Pixel **
```c
bool qp_setpixel(painter_device_t device, uint16_t x, uint16_t y, uint8_t hue, uint8_t sat, uint8_t val);
@@ -298,7 +558,7 @@ void housekeeping_task_user(void) {
}
```
-#### Draw Line :id=quantum-painter-api-line
+#### ** Draw Line **
```c
bool qp_line(painter_device_t device, uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint8_t hue, uint8_t sat, uint8_t val);
@@ -320,7 +580,7 @@ void housekeeping_task_user(void) {
}
```
-#### Draw Rect :id=quantum-painter-api-rect
+#### ** Draw Rect **
```c
bool qp_rect(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom, uint8_t hue, uint8_t sat, uint8_t val, bool filled);
@@ -342,7 +602,7 @@ void housekeeping_task_user(void) {
}
```
-#### Draw Circle :id=quantum-painter-api-circle
+#### ** Draw Circle **
```c
bool qp_circle(painter_device_t device, uint16_t x, uint16_t y, uint16_t radius, uint8_t hue, uint8_t sat, uint8_t val, bool filled);
@@ -364,7 +624,7 @@ void housekeeping_task_user(void) {
}
```
-#### Draw Ellipse :id=quantum-painter-api-ellipse
+#### ** Draw Ellipse **
```c
bool qp_ellipse(painter_device_t device, uint16_t x, uint16_t y, uint16_t sizex, uint16_t sizey, uint8_t hue, uint8_t sat, uint8_t val, bool filled);
@@ -386,9 +646,24 @@ void housekeeping_task_user(void) {
}
```
-### Image Functions :id=quantum-painter-api-images
+<!-- tabs:end -->
+
+### ** Image Functions **
-#### Load Image :id=quantum-painter-api-load-image
+Making an image available for use requires compiling it into your firmware. To do so, assuming you've created `my_image.qgf.c` and `my_image.qgf.h` as per the CLI examples above, you'd add the following to your `rules.mk`:
+
+```make
+SRC += my_image.qgf.c
+```
+
+...and in your `keymap.c`, you'd add to the top of the file:
+```c
+#include "my_image.qgf.h"
+```
+
+<!-- tabs:start -->
+
+#### ** Load Image **
```c
painter_image_handle_t qp_load_image_mem(const void *buffer);
@@ -396,7 +671,7 @@ painter_image_handle_t qp_load_image_mem(const void *buffer);
The `qp_load_image_mem` function loads a QGF image from memory or flash.
-`qp_load_image_mem` returns a handle to the loaded image, which can then be used to draw to the screen using `qp_drawimage`, `qp_drawimage_recolor`, `qp_animate`, or `qp_animate_recolor`. If an image is no longer required, it can be unloaded by calling `qp_close_image` below.
+`qp_load_image_mem` returns a handle to the loaded image, which can then be used to draw to the screen using `qp_drawimage`, `qp_drawimage_recolor`, `qp_animate`, or `qp_animate_recolor`. If an image is no longer required, it can be unloaded by calling `qp_close_image` below.
See the [CLI Commands](quantum_painter.md?id=quantum-painter-cli) for instructions on how to convert images to [QGF](quantum_painter_qgf.md).
@@ -410,7 +685,7 @@ Image information is available through accessing the handle:
| Height | `image->height` |
| Frame Count | `image->frame_count` |
-#### Unload Image :id=quantum-painter-api-close-image
+#### ** Unload Image **
```c
bool qp_close_image(painter_image_handle_t image);
@@ -418,7 +693,7 @@ bool qp_close_image(painter_image_handle_t image);
The `qp_close_image` function releases resources related to the loading of the supplied image.
-#### Draw image :id=quantum-painter-api-draw-image
+#### ** Draw image **
```c
bool qp_drawimage(painter_device_t device, uint16_t x, uint16_t y, painter_image_handle_t image);
@@ -438,7 +713,7 @@ void keyboard_post_init_kb(void) {
}
```
-#### Animate Image :id=quantum-painter-api-animate-image
+#### ** Animate Image **
```c
deferred_token qp_animate(painter_device_t device, uint16_t x, uint16_t y, painter_image_handle_t image);
@@ -463,7 +738,7 @@ void keyboard_post_init_kb(void) {
}
```
-#### Stop Animation :id=quantum-painter-api-stop-animation
+#### ** Stop Animation **
```c
void qp_stop_animation(deferred_token anim_token);
@@ -478,9 +753,24 @@ void housekeeping_task_user(void) {
}
```
-### Font Functions :id=quantum-painter-api-fonts
+<!-- tabs:end -->
+
+### ** Font Functions **
-#### Load Font :id=quantum-painter-api-load-font
+Making a font available for use requires compiling it into your firmware. To do so, assuming you've created `my_font.qff.c` and `my_font.qff.h` as per the CLI examples above, you'd add the following to your `rules.mk`:
+
+```make
+SRC += noto11.qff.c
+```
+
+...and in your `keymap.c`, you'd add to the top of the file:
+```c
+#include "noto11.qff.h"
+```
+
+<!-- tabs: start -->
+
+#### ** Load Font **
```c
painter_font_handle_t qp_load_font_mem(const void *buffer);
@@ -488,7 +778,7 @@ painter_font_handle_t qp_load_font_mem(const void *buffer);
The `qp_load_font_mem` function loads a QFF font from memory or flash.
-`qp_load_font_mem` returns a handle to the loaded font, which can then be measured using `qp_textwidth`, or drawn to the screen using `qp_drawtext`, or `qp_drawtext_recolor`. If a font is no longer required, it can be unloaded by calling `qp_close_font` below.
+`qp_load_font_mem` returns a handle to the loaded font, which can then be measured using `qp_textwidth`, or drawn to the screen using `qp_drawtext`, or `qp_drawtext_recolor`. If a font is no longer required, it can be unloaded by calling `qp_close_font` below.
See the [CLI Commands](quantum_painter.md?id=quantum-painter-cli) for instructions on how to convert TTF fonts to [QFF](quantum_painter_qff.md).
@@ -500,7 +790,7 @@ Font information is available through accessing the handle:
|-------------|----------------------|
| Line Height | `image->line_height` |
-#### Unload Font :id=quantum-painter-api-close-font
+#### ** Unload Font **
```c
bool qp_close_font(painter_font_handle_t font);
@@ -508,7 +798,7 @@ bool qp_close_font(painter_font_handle_t font);
The `qp_close_font` function releases resources related to the loading of the supplied font.
-#### Measure Text :id=quantum-painter-api-textwidth
+#### ** Measure Text **
```c
int16_t qp_textwidth(painter_font_handle_t font, const char *str);
@@ -516,7 +806,7 @@ int16_t qp_textwidth(painter_font_handle_t font, const char *str);
The `qp_textwidth` function allows measurement of how many pixels wide the supplied string would result in, for the given font.
-#### Draw Text :id=quantum-painter-api-drawtext
+#### ** Draw Text **
```c
int16_t qp_drawtext(painter_device_t device, uint16_t x, uint16_t y, painter_font_handle_t font, const char *str);
@@ -529,7 +819,7 @@ The `qp_drawtext` and `qp_drawtext_recolor` functions draw the supplied string t
// Draw a text message on the bottom-right of the 240x320 display on initialisation
static painter_font_handle_t my_font;
void keyboard_post_init_kb(void) {
- my_font = qp_load_font_mem(font_opensans);
+ my_font = qp_load_font_mem(font_noto11);
if (my_font != NULL) {
static const char *text = "Hello from QMK!";
int16_t width = qp_textwidth(my_font, text);
@@ -538,9 +828,13 @@ void keyboard_post_init_kb(void) {
}
```
-### Advanced Functions :id=quantum-painter-api-advanced
+<!-- tabs:end -->
+
+### ** Advanced Functions **
-#### Get Geometry :id=quantum-painter-api-get-geometry
+<!-- tabs:start -->
+
+#### ** Get Geometry **
```c
void qp_get_geometry(painter_device_t device, uint16_t *width, uint16_t *height, painter_rotation_t *rotation, uint16_t *offset_x, uint16_t *offset_y);
@@ -548,7 +842,7 @@ void qp_get_geometry(painter_device_t device, uint16_t *width, uint16_t *height,
The `qp_get_geometry` function allows external code to retrieve the current width, height, rotation, and drawing offsets.
-#### Set Viewport Offsets :id=quantum-painter-api-set-viewport
+#### ** Set Viewport Offsets **
```c
void qp_set_viewport_offsets(painter_device_t device, uint16_t offset_x, uint16_t offset_y);
@@ -556,7 +850,7 @@ void qp_set_viewport_offsets(painter_device_t device, uint16_t offset_x, uint16_
The `qp_set_viewport_offsets` function can be used to offset all subsequent drawing operations. For example, if a display controller is internally 240x320, but the display panel is 240x240 and has a Y offset of 80 pixels, you could invoke `qp_set_viewport_offsets(display, 0, 80);` and the drawing positioning would be corrected.
-#### Set Viewport :id=quantum-painter-api-viewport
+#### ** Set Viewport **
```c
bool qp_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom);
@@ -564,7 +858,7 @@ bool qp_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t
The `qp_viewport` function controls where raw pixel data is written to.
-#### Stream Pixel Data :id=quantum-painter-api-pixdata
+#### ** Stream Pixel Data **
```c
bool qp_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count);
@@ -574,184 +868,6 @@ The `qp_pixdata` function allows raw pixel data to be streamed to the display. I
!> Under normal circumstances, users will not need to manually call either `qp_viewport` or `qp_pixdata`. These allow for writing of raw pixel information, in the display panel's native format, to the area defined by the viewport.
-## Quantum Painter Display Drivers :id=quantum-painter-drivers
-
-### Common: Standard TFT (SPI + D/C + RST)
-
-Most TFT display panels use a 5-pin interface -- SPI SCK, SPI MOSI, SPI CS, D/C, and RST pins.
-
-For these displays, QMK's `spi_master` must already be correctly configured for the platform you're building for.
-
-The pin assignments for SPI CS, D/C, and RST are specified during device construction.
-
-### GC9A01 :id=qp-driver-gc9a01
-
-Enabling support for the GC9A01 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = gc9a01_spi
-```
-
-Creating a GC9A01 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_gc9a01_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_gc9a01_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define GC9A01_NUM_DEVICES 3
-```
-
-### ILI9163 :id=qp-driver-ili9163
-
-Enabling support for the ILI9163 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = ili9163_spi
-```
-
-Creating a ILI9163 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_ili9163_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_ili9163_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define ILI9163_NUM_DEVICES 3
-```
-
-### ILI9341 :id=qp-driver-ili9341
-
-Enabling support for the ILI9341 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = ili9341_spi
-```
-
-Creating a ILI9341 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_ili9341_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define ILI9341_NUM_DEVICES 3
-```
-
-### ILI9488 :id=qp-driver-ili9488
-
-Enabling support for the ILI9488 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = ili9488_spi
-```
-
-Creating a ILI9488 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_ili9488_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define ILI9488_NUM_DEVICES 3
-```
-
-### SSD1351 :id=qp-driver-ssd1351
-
-Enabling support for the SSD1351 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = ssd1351_spi
-```
-
-Creating a SSD1351 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_ssd1351_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_ssd1351_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define SSD1351_NUM_DEVICES 3
-```
-
-### ST7789 :id=qp-driver-st7789
-
-Enabling support for the ST7789 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = st7789_spi
-```
-
-Creating a ST7789 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_st7789_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_st7789_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define ST7789_NUM_DEVICES 3
-```
-
-!> Some ST7789 devices are known to have different drawing offsets -- despite being a 240x320 pixel display controller internally, some display panels are only 240x240, or smaller. These may require an offset to be applied; see `qp_set_viewport_offsets` above for information on how to override the offsets if they aren't correctly rendered.
-
-### ST7735 :id=qp-driver-st7735
-
-Enabling support for the ST7735 in Quantum Painter is done by adding the following to `rules.mk`:
-
-```make
-QUANTUM_PAINTER_ENABLE = yes
-QUANTUM_PAINTER_DRIVERS = st7735_spi
-```
-
-Creating a ST7735 device in firmware can then be done with the following API:
-
-```c
-painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
-```
-
-The device handle returned from the `qp_st7735_make_spi_device` function can be used to perform all other drawing operations.
-
-The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
-
-```c
-// 3 displays:
-#define ST7735_NUM_DEVICES 3
-```
+<!-- tabs:end -->
-!> Some ST7735 devices are known to have different drawing offsets -- despite being a 132x162 pixel display controller internally, some display panels are only 80x160, or smaller. These may require an offset to be applied; see `qp_set_viewport_offsets` above for information on how to override the offsets if they aren't correctly rendered. \ No newline at end of file
+<!-- tabs:end -->