summaryrefslogtreecommitdiff
path: root/docs/feature_pointing_device.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/feature_pointing_device.md')
-rw-r--r--docs/feature_pointing_device.md32
1 files changed, 32 insertions, 0 deletions
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md
index 8c51865558..02c1e64a31 100644
--- a/docs/feature_pointing_device.md
+++ b/docs/feature_pointing_device.md
@@ -134,6 +134,7 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t
### PMW 3360 Sensor
+This drivers supports multiple sensors _per_ controller, so 2 can be attached at the same side for split keyboards (or unsplit keyboards).
To use the PMW 3360 sensor, add this to your `rules.mk`
```make
@@ -145,6 +146,7 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su
| Setting | Description | Default |
|-----------------------------|--------------------------------------------------------------------------------------------|---------------|
|`PMW3360_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+|`PMW3360_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
|`PMW3360_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
@@ -155,6 +157,36 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su
The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.
+To use multiple sensors, instead of setting `PMW3360_CS_PIN` you need to set `PMW3360_CS_PINS` and also handle and merge the read from this sensor in user code.
+Note that different (per sensor) values of CPI, speed liftoff, rotational angle or flipping of X/Y is not currently supported.
+
+```c
+// in config.h:
+#define PMW3360_CS_PINS { B5, B6 }
+
+// in keyboard.c:
+#ifdef POINTING_DEVICE_ENABLE
+void pointing_device_init_kb(void) {
+ pmw3360_init(1); // index 1 is the second device.
+ pointing_device_set_cpi(800); // applies to both sensors
+ pointing_device_init_user();
+}
+
+// Contains report from sensor #0 already, need to merge in from sensor #1
+report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
+ report_pmw3360_t data = pmw3360_read_burst(1);
+ if (data.isOnSurface && data.isMotion) {
+// From quantum/pointing_device_drivers.c
+#define constrain_hid(amt) ((amt) < -127 ? -127 : ((amt) > 127 ? 127 : (amt)))
+ mouse_report.x = constrain_hid(mouse_report.x + data.dx);
+ mouse_report.y = constrain_hid(mouse_report.y + data.dy);
+ }
+ return pointing_device_task_user(mouse_report);
+}
+#endif
+
+```
+
### PMW 3389 Sensor
To use the PMW 3389 sensor, add this to your `rules.mk`