summaryrefslogtreecommitdiff
path: root/docs/config_options.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/config_options.md')
-rw-r--r--docs/config_options.md33
1 files changed, 12 insertions, 21 deletions
diff --git a/docs/config_options.md b/docs/config_options.md
index 8227a0e074..3e011a5cc9 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -57,8 +57,6 @@ This is a C header file that is one of the first things included, and will persi
* may be omitted by the keyboard designer if matrix reads are handled in an alternate manner. See [low-level matrix overrides](custom_quantum_functions.md?id=low-level-matrix-overrides) for more information.
* `#define MATRIX_IO_DELAY 30`
* the delay in microseconds when between changing matrix pin state and reading values
-* `#define UNUSED_PINS { D1, D2, D3, B1, B2, B3 }`
- * pins unused by the keyboard for reference
* `#define MATRIX_HAS_GHOST`
* define is matrix has ghost (unlikely)
* `#define MATRIX_UNSELECT_DRIVE_HIGH`
@@ -107,8 +105,10 @@ This is a C header file that is one of the first things included, and will persi
* sets the maximum power (in mA) over USB for the device (default: 500)
* `#define USB_POLLING_INTERVAL_MS 10`
* sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces
-* `#define USB_SUSPEND_WAKEUP_DELAY 200`
- * set the number of milliseconde to pause after sending a wakeup packet
+* `#define USB_SUSPEND_WAKEUP_DELAY 0`
+ * sets the number of milliseconds to pause after sending a wakeup packet.
+ Disabled by default, you might want to set this to 200 (or higher) if the
+ keyboard does not wake up properly after suspending.
* `#define F_SCL 100000L`
* sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`.
@@ -141,7 +141,7 @@ If you define these options you will enable the associated feature, which may in
## Behaviors That Can Be Configured
* `#define TAPPING_TERM 200`
- * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
+ * how long before a key press becomes a hold
* `#define TAPPING_TERM_PER_KEY`
* enables handling for per key `TAPPING_TERM` settings
* `#define RETRO_TAPPING`
@@ -174,19 +174,12 @@ If you define these options you will enable the associated feature, which may in
* sets the timer for leader key chords to run on each key press rather than overall
* `#define LEADER_KEY_STRICT_KEY_PROCESSING`
* Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`.
+* `#define MOUSE_EXTENDED_REPORT`
+ * Enables support for extended reports (-32767 to 32767, instead of -127 to 127), which may allow for smoother reporting, and prevent maxing out of the reports. Applies to both Pointing Device and Mousekeys.
* `#define ONESHOT_TIMEOUT 300`
* how long before oneshot times out
* `#define ONESHOT_TAP_TOGGLE 2`
* how many taps before oneshot toggle is triggered
-* `#define QMK_KEYS_PER_SCAN 4`
- * Allows sending more than one key per scan. By default, only one key event gets
- sent via `process_record()` per scan. This has little impact on most typing, but
- if you're doing a lot of chords, or your scan rate is slow to begin with, you can
- have some delay in processing key events. Each press and release is a separate
- event. For a keyboard with 1ms or so scan times, even a very fast typist isn't
- going to produce the 500 keystrokes a second needed to actually get more than a
- few ms of delay from this. But if you're doing chording on something with 3-4ms
- scan times? You probably want this.
* `#define COMBO_COUNT 2`
* Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature. Or leave it undefined and programmatically set the count.
* `#define COMBO_TERM 200`
@@ -194,7 +187,7 @@ If you define these options you will enable the associated feature, which may in
* `#define COMBO_MUST_HOLD_MODS`
* Flag for enabling extending timeout on Combos containing modifers
* `#define COMBO_MOD_TERM 200`
- * Allows for extending COMBO_TERM for mod keys while mid-combo.
+ * Allows for extending COMBO_TERM for mod keys while mid-combo.
* `#define COMBO_MUST_HOLD_PER_COMBO`
* Flag to enable per-combo COMBO_TERM extension and `get_combo_must_hold()` function
* `#define COMBO_TERM_PER_COMBO`
@@ -214,14 +207,12 @@ If you define these options you will enable the associated feature, which may in
* `#define RGB_DI_PIN D7`
* pin the DI on the WS2812 is hooked-up to
-* `#define RGBLIGHT_ANIMATIONS`
- * run RGB animations
* `#define RGBLIGHT_LAYERS`
* Lets you define [lighting layers](feature_rgblight.md?id=lighting-layers) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
* `#define RGBLIGHT_MAX_LAYERS`
* Defaults to 8. Can be expanded up to 32 if more [lighting layers](feature_rgblight.md?id=lighting-layers) are needed.
* Note: Increasing the maximum will increase the firmware size and slow sync on split keyboards.
-* `#define RGBLIGHT_LAYER_BLINK`
+* `#define RGBLIGHT_LAYER_BLINK`
* Adds ability to [blink](feature_rgblight.md?id=lighting-layer-blink) a lighting layer for a specified number of milliseconds (e.g. to acknowledge an action).
* `#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF`
* If defined, then [lighting layers](feature_rgblight?id=overriding-rgb-lighting-onoff-status) will be shown even if RGB Light is off.
@@ -366,8 +357,8 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
* `SRC`
* Used to add files to the compilation/linking list.
* `LIB_SRC`
- * Used to add files as a library to the compilation/linking list.
- The files specified by `LIB_SRC` is linked after the files specified by `SRC`.
+ * Used to add files as a library to the compilation/linking list.
+ The files specified by `LIB_SRC` is linked after the files specified by `SRC`.
For example, if you specify:
```
SRC += a.c
@@ -420,7 +411,7 @@ Use these to enable or disable building certain features. The more you have enab
* `NKRO_ENABLE`
* USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
* `RING_BUFFERED_6KRO_REPORT_ENABLE`
- * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed.
+ * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed.
* `AUDIO_ENABLE`
* Enable the audio subsystem.
* `KEY_OVERRIDE_ENABLE`