summaryrefslogtreecommitdiff
path: root/converter
diff options
context:
space:
mode:
Diffstat (limited to 'converter')
-rw-r--r--converter/m0110_usb/Makefile.lufa91
-rw-r--r--converter/m0110_usb/README.md7
-rw-r--r--converter/m0110_usb/config.h1
-rw-r--r--converter/m0110_usb/keymap.c9
-rw-r--r--converter/pc98_usb/keymap.c2
5 files changed, 101 insertions, 9 deletions
diff --git a/converter/m0110_usb/Makefile.lufa b/converter/m0110_usb/Makefile.lufa
new file mode 100644
index 0000000000..028bdf9331
--- /dev/null
+++ b/converter/m0110_usb/Makefile.lufa
@@ -0,0 +1,91 @@
+# Target file name (without extension).
+TARGET = m0110_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c \
+ m0110.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+hasu: EXTRAFLAGS += -DHASU
+hasu: all
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index 206f434251..80503e8755 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -53,7 +53,8 @@ You can edit *Makefile* and *config.h* to change compile options and pin configu
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb
- $ make
+ $ make -f Makefile.lufa clean
+ $ make -f Makefile.lufa
and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
@@ -74,7 +75,7 @@ You can change keymaps by editing *keymap.c*.
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
`---------------------------------------------------------' |-----------|Ent|
- |Alt|Gui | Space |Ctl |Alt| | 0| .| |
+ |Ctl|Alt | Space |Gui |Ctl| | 0| .| |
`-----------------------------------------------' `---------------'
#### *HHKB/WASD Layer(WASD/IJKL)*
,---------------------------------------------------------. ,---------------.
@@ -86,7 +87,7 @@ You can change keymaps by editing *keymap.c*.
|---------------------------------------------------------| |---------------|
|Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| |
`---------------------------------------------------------' |-----------|Ent|
- |Alt|Gui | Space |Ctl |Alt| | 0| .| |
+ |Ctl|Alt | Space |Gui |Ctl| | 0| .| |
`-----------------------------------------------' `---------------'
### M0110A
diff --git a/converter/m0110_usb/config.h b/converter/m0110_usb/config.h
index be00259e6b..d43f283838 100644
--- a/converter/m0110_usb/config.h
+++ b/converter/m0110_usb/config.h
@@ -24,6 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0110
+#define DEVICE_VER 0x0100
#define MANUFACTURER t.m.k.
#define PRODUCT M0110 keyboard converter
#define DESCRIPTION convert M0110 keyboard to USB
diff --git a/converter/m0110_usb/keymap.c b/converter/m0110_usb/keymap.c
index 191bf3a156..7a3bc35856 100644
--- a/converter/m0110_usb/keymap.c
+++ b/converter/m0110_usb/keymap.c
@@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
-#include "usb_keyboard.h"
#include "keycode.h"
#include "print.h"
#include "debug.h"
@@ -148,7 +147,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
- * |Alt |Gui | Space |Ctl| \|Lft|Rgt|Dn | | 0| .| |
+ * |Ctl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*/
KEYMAP(
@@ -156,7 +155,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, LCTL,BSLS,LEFT,RGHT,DOWN, P0, PDOT
+ LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT
),
/* Cursor Layer(WASD, IJKL)
* ,---------------------------------------------------------. ,---------------.
@@ -168,7 +167,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |---------------------------------------------------------| |---------------|
* |Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
- * |Alt |Gui | Space |Gui |Ins|Hom|End|PgD| | 0| .| |
+ * |Ctl |Alt | Space |Gui |Ins|Hom|End|PgD| | 0| .| |
* `---------------------------------------------------------' `---------------'
*/
KEYMAP(
@@ -176,7 +175,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
CAPS,HOME,UP, PGUP,NO, NO, NO, PGUP,UP, HOME,PSCR,SLCK,PAUS, P7, P8, P9, PMNS,
FN0, LEFT,DOWN,RGHT,NO, NO, NO, LEFT,DOWN,RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
LSFT,END, NO, PGDN,NO, NO, NO, PGDN,NO, END, NO, PGUP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, LCTL,INS, HOME,END, PGDN, P0, PDOT
+ LCTL,LALT, SPC, LGUI,INS, HOME,END, PGDN, P0, PDOT
),
};
diff --git a/converter/pc98_usb/keymap.c b/converter/pc98_usb/keymap.c
index f793539dfd..279b2b60c0 100644
--- a/converter/pc98_usb/keymap.c
+++ b/converter/pc98_usb/keymap.c
@@ -168,7 +168,7 @@ static const uint16_t PROGMEM fn_actions[] = {
ACTION_KEYMAP_TAP_TOGGLE(0), // FN0
ACTION_KEYMAP_TAP_KEY(1, KC_SLASH), // FN1
ACTION_KEYMAP_TAP_KEY(2, KC_SCLN), // FN2
- ACTION_KEYMAP(2), // FN3
+ ACTION_KEYMAP_MOMENTARY(2), // FN3
ACTION_MACRO(LBRACKET), // FN4
ACTION_MACRO(RBRACKET), // FN5
ACTION_MACRO(DUMMY), // FN6