diff options
Diffstat (limited to 'converter/x68k_usb')
| -rw-r--r-- | converter/x68k_usb/Makefile | 20 | ||||
| -rw-r--r-- | converter/x68k_usb/config_pjrc.h | 23 | ||||
| -rw-r--r-- | converter/x68k_usb/led.c | 24 |
3 files changed, 55 insertions, 12 deletions
diff --git a/converter/x68k_usb/Makefile b/converter/x68k_usb/Makefile index 62b976c56f..fd66ed563b 100644 --- a/converter/x68k_usb/Makefile +++ b/converter/x68k_usb/Makefile @@ -16,7 +16,8 @@ TARGET_DIR = . SRC = keymap.c \ matrix.c \ led.c \ - x68k.c + protocol/x68k.c +# protocol/serial_uart.c CONFIG_H = config_pjrc.h @@ -37,12 +38,23 @@ MCU = atmega32u4 # Teensy 2.0 F_CPU = 16000000 +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + # Build Options # *Comment out* to disable the options. # -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -NKRO_ENABLE = yes # USB Nkey Rollover +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA diff --git a/converter/x68k_usb/config_pjrc.h b/converter/x68k_usb/config_pjrc.h index 2df83a2cb4..dd277cff18 100644 --- a/converter/x68k_usb/config_pjrc.h +++ b/converter/x68k_usb/config_pjrc.h @@ -40,11 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* legacy keymap support */ #define USE_LEGACY_KEYMAP -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 255 -#endif - /* USART configuration * asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control @@ -57,7 +52,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define KBD_RX_INIT() do { \ UBRR1L = (uint8_t) KBD_RX_UBBR; \ UBRR1H = (uint8_t) (KBD_RX_UBBR>>8); \ - UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \ + UCSR1B |= (1<<RXCIE1) | (1<<RXEN1) | (1<<TXEN1); \ + } while(0) + + + #define SERIAL_UART_BAUD 2400 + #define SERIAL_UART_DATA UDR1 + #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) + #define SERIAL_UART_RXD_VECT USART1_RX_vect + #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) + #define SERIAL_UART_INIT() do { \ + UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ + UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ + UCSR1B = (1<<RXCIE1) | (1<<RXEN1) | /* RX: interrupt, RX: enable */ \ + (1<<TXEN1); /* TX: enable */ \ + UCSR1C = (1<<UPM11) | (1<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ + (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* 8bit-data(011) */ \ + sei(); \ } while(0) #else # error "USART configuration is needed." diff --git a/converter/x68k_usb/led.c b/converter/x68k_usb/led.c index 40156cf4ac..a1c1d546ec 100644 --- a/converter/x68k_usb/led.c +++ b/converter/x68k_usb/led.c @@ -16,11 +16,31 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "stdint.h" -#include "x68k.h" +#include "serial.h" #include "led.h" +#include "debug.h" +#include "x68k.h" void led_set(uint8_t usb_led) { - // not supported now + /* X68000 LED bits 0: on, 1: off + * bit 7 1(fixed) + * bit 6 全角 + * bit 5 ひらがな + * bit 4 INS + * bit 3 CAPS + * bit 2 コード入力 + * bit 1 ローマ字 + * bit 0 かな + */ + uint8_t led = 0xFF; + xprintf("usb_led: %02X\n", usb_led); + if (usb_led&(1<<USB_LED_NUM_LOCK)) led &= ~(1<<2); + if (usb_led&(1<<USB_LED_CAPS_LOCK)) led &= ~(1<<3); + if (usb_led&(1<<USB_LED_SCROLL_LOCK)) led &= ~(1<<1); + if (usb_led&(1<<USB_LED_COMPOSE)) led &= ~(1<<4); + if (usb_led&(1<<USB_LED_KANA)) led &= ~(1<<0); + xprintf("led: %02X\n", led); + x68k_send(led); } |