diff options
Diffstat (limited to 'converter/serialmouse_usb/config.h')
| -rw-r--r-- | converter/serialmouse_usb/config.h | 119 |
1 files changed, 0 insertions, 119 deletions
diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h deleted file mode 100644 index b257d997cf..0000000000 --- a/converter/serialmouse_usb/config.h +++ /dev/null @@ -1,119 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include <avr/interrupt.h> - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2222 -#define DEVICE_VER 0x0001 -#define MANUFACTURER t.m.k. -#define PRODUCT serial mouse converter -#define DESCRIPTION convert serial mouse into USB - - -/* matrix size */ -#define MATRIX_ROWS 0 -#define MATRIX_COLS 0 - - -/* key combination for command */ -#define IS_COMMAND() false - - - -#ifdef SERIAL_MOUSE_MICROSOFT - /* - * Serial(USART) configuration (for Microsoft serial mice) - * asynchronous, positive logic, 1200baud, bit order: LSB first - * 1-start bit, 7-data bit, no parity, 1-stop bit - */ - #define SERIAL_UART_BAUD 1200 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ - UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \ - sei(); \ - } while(0) - - // for Microsoft mouse protocol - /* Serial(USART) configuration - * asynchronous, negative logic, 1200baud, no flow control - * 1-start bit, 7-data bit, non parity, 1-stop bit - */ - #define SERIAL_SOFT_BAUD 1200 - #define SERIAL_SOFT_DATA_7BIT - #define SERIAL_SOFT_PARITY_NONE - #define SERIAL_SOFT_BIT_ORDER_LSB - #define SERIAL_SOFT_LOGIC_NEGATIVE - /* RXD Port */ - #define SERIAL_SOFT_RXD_DDR DDRD - #define SERIAL_SOFT_RXD_PORT PORTD - #define SERIAL_SOFT_RXD_PIN PIND - #define SERIAL_SOFT_RXD_BIT 2 - #define SERIAL_SOFT_RXD_VECT INT2_vect - /* RXD Interupt */ - #define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ - SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ - /* enable interrupt: INT2(rising edge) */ \ - EICRA |= ((1<<ISC21)|(1<<ISC20)); \ - EIMSK |= (1<<INT2); \ - sei(); \ - } while (0) - #define SERIAL_SOFT_RXD_INT_ENTER() - #define SERIAL_SOFT_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF2); \ - } while (0) - #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) - /* TXD Port */ - #define SERIAL_SOFT_TXD_HI() - #define SERIAL_SOFT_TXD_LO() - #define SERIAL_SOFT_TXD_INIT() -#elif defined(SERIAL_MOUSE_MOUSESYSTEMS) - /* - * Serial(USART) configuration (for Mousesystems serial mice) - * asynchronous, positive logic, 1200baud, bit order: LSB first - * 1-start bit, 8-data bit, no parity, 1-stop bit - */ - #define SERIAL_UART_BAUD 1200 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ - UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \ - sei(); \ - } while(0) -#endif - - - - -#endif |