diff options
Diffstat (limited to 'converter/m0110_usb/README.md')
| -rw-r--r-- | converter/m0110_usb/README.md | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md new file mode 100644 index 0000000000..c1ecb53b0b --- /dev/null +++ b/converter/m0110_usb/README.md @@ -0,0 +1,82 @@ +M0110/M0110A to USB keyboard converter +====================================== +This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. + +Read README of top directory too. + +Pictures of **M0110 + M0120** and **M0110A**. + + + + + +- M0110A support was contributed by [skagon@github](https://github.com/skagon). +- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys. + + + +Update +------ +- 2013/08: Change port for signals `PF` to `PD` +- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. +- 2014/06: Change keymaps +- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c) + + + +Building Hardware +----------------- +You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. + +[](http://i.imgur.com/4G2ZOeg.jpg) + +### 4P4C phone handset cable +Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. + +<http://en.wikipedia.org/wiki/Modular_connector#4P4C> + +Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. +[](http://i.imgur.com/3S9P1mY.jpg?1) + +[Teensy]: http://www.pjrc.com/teensy/ +[TMK converter]: https://github.com/tmk/keyboard_converter + + +### Socket Pinout +- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml> + + + + +### Pull-up Resistor +You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. + + + +Building Firmware +----------------- +To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap. + + $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) + $ cd m0110_usb + $ make -f Makefile clean + $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}] + +Use `Makefile.teensy` instead for Teensy. + + + +Keymap +------ +To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this. + + $ make -f Makefile clean + $ make -f Makefile KEYMAP=name + + + +Debug +----- +You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Magic>+H` simultaneously to get help. + +- Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`) |