1 files changed, 70 insertions, 0 deletions
diff --git a/converter/ascii_usb/config.h b/converter/ascii_usb/config.h
new file mode 100644
index 0000000000..0908997a53
--- /dev/null
+++ b/converter/ascii_usb/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5C01
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         ASCII keyboard converter
+#define DESCRIPTION     converts Serial Console Terminal into USB keyboard
+
+
+/* matrix size */
+#define MATRIX_ROWS     16
+#define MATRIX_COLS     16
+
+/* key combination for command */
+#define IS_COMMAND()    ( \
+    host_get_first_key() == KC_BRK \
+)
+
+
+/*
+ * Serial(USART) configuration
+ *     asynchronous, positive logic, 19200baud, bit order: LSB first
+ *     1-start bit, 8-data bit, odd parity, 1-stop bit
+ */
+#ifdef __AVR_ATmega32U4__
+    #define SERIAL_UART_BAUD       19200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
+        UCSR1C |= (1<<UPM11) | (1<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
+        sei(); \
+    } while(0)
+#else
+    #error "USART configuration is needed."
+#endif
+
+/* disable action features */
+#define NO_ACTION_LAYER
+#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+
+#endif